INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Can't play 88.2 or 96khz files even though my dac supports them  (Read 2323 times)

qiking

  • Recent member
  • *
  • Posts: 15
Can't play 88.2 or 96khz files even though my dac supports them
« on: May 06, 2015, 03:13:58 am »
I am using Windows Vista Ultimate and have the Schiit Modi plugged into a usb 2.0 port and it works fine unless I want to play a file higher than 48khz bit perfect. I know the modi is supposed to support 88.2 and 96khz but for some reason I cannot get those to sample rates to work in wasapi. JRiver just keeps wanting to downsample to 48k. It sounds fine and I probably wouldn't hear any difference at the higher sample rates, but still being that it (may dac) is supposed to support those rates I would like to get to the source of the problem. If any of you have had this issue and have fixed the problem I would really like to hear about the solution.
Best Wishes
Logged

glynor

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 19608
Re: Can't get JRiver to play 88.2 or 96khz files even though my dac supports them
« Reply #1 on: May 06, 2015, 06:38:05 am »
Make sure the drivers for your DAC are properly installed.  Read:
http://wiki.jriver.com/index.php/Audio_Setup
Logged
"Some cultures are defined by their relationship to cheese."

Visit me on the Interweb Thingie: http://glynor.com/

dmac6419

  • Recent member
  • *
  • Posts: 18
Re: Can't get JRiver to play 88.2 or 96khz files even though my dac supports them
« Reply #2 on: May 06, 2015, 08:03:15 am »
Check the output format in DSP setting
Logged

qiking

  • Recent member
  • *
  • Posts: 15
Re: Can't play 88.2 or 96khz files even though my dac supports them
« Reply #3 on: May 12, 2015, 08:37:17 pm »
There are no drivers to install with this dac.
Logged

qiking

  • Recent member
  • *
  • Posts: 15
Re: Can't play 88.2 or 96khz files even though my dac supports them
« Reply #4 on: May 12, 2015, 08:42:23 pm »
I have checked the output in DSP and when I try to play a 88.2 or 96khz or higher file it tells me that this cannot be done and wants to set everthing higher than 48k to 48Khz. I have everthing higher than 96khz to downsample to 96khz being that the modi doesn't support anything higher than 96khz. When I go into the sound settings in control panel and select properties then the advanced tab it doesn't show anything higher than 24/48 supported, but with the onboard crap dac on my laptop it goes all the way to 24/192. I contacted Schiit support but their support is schitt.
Logged

tiberiuspv

  • Recent member
  • *
  • Posts: 49
Re: Can't play 88.2 or 96khz files even though my dac supports them
« Reply #5 on: May 12, 2015, 08:57:34 pm »
ALL DACs need drivers under Windows to operate at higher data rates. Microsoft does not provide a generic driver for that purpose, even though there is a standard spec - which is implemented in MacOS for example. The driver provided in Windows operates in the ancient synchronous USB mode which cannot significantly exceed CD quality.

Schiit provides a unified driver for all their DACs. Go to the Modi (2) web page http://schiit.com/products/modi-2, look for the Downloads tab, last item on the list of downloads. Don't forget to configure the MC audio output to the Modi.

Good luck...
Logged

glynor

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 19608
Re: Can't play 88.2 or 96khz files even though my dac supports them
« Reply #6 on: May 12, 2015, 10:33:47 pm »
Quote from: tiberiuspv on May 12, 2015, 08:57:34 pm
ALL DACs need drivers under Windows to operate at higher data rates.

Yep.
Logged
"Some cultures are defined by their relationship to cheese."

Visit me on the Interweb Thingie: http://glynor.com/
Pages: [1]   Go Up
« previous next »