ICE

Please login or register.

Login with username, password and session length
Advanced search  

News:

ICETCP.PRO and ICETCP.PLUS are compatible with Windows 11!

Author Topic: disconnecting  (Read 1654 times)

billm

  • Newbie
  • *
  • Posts: 2
  • Place Personal Text Here
disconnecting
« on: June 14, 2004, 11:41:50 am »

Version 3.0.12 IceOffSite running WindowsXP can connect works fine but after a few minutes comes back to login screen. This happens if idle or in the middle of working.
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
disconnecting
« Reply #1 on: June 14, 2004, 05:14:55 pm »

If you are getting dumped to a login screen without having to redial the problem is on the Unix side. Something is killing the application that you are running on the Unix machine. Have your Unix sysadmin check this out.

If you are having to redial to get a new login screen it's likely that your modem isn't making a very good connection to the Unix machines modem.
Logged

billm

  • Newbie
  • *
  • Posts: 2
  • Place Personal Text Here
Re:disconnecting
« Reply #2 on: June 15, 2004, 08:02:36 am »

This is a serial connection I don't dial in it's hard wired to Digi C/x like a hub.
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
disconnecting
« Reply #3 on: June 15, 2004, 11:19:28 am »

That pretty much points at the Unix side.

The only thing that might cause this on the PC side is the communications protocol under the serial parameters tab in iceconfig. You should probably set this to Xon/Xoff. DTR/DSR or RTS/CTS MAY be able to cause this behavior depending on the way that the serial cable is wired.
Logged
 

Page created in 0.014 seconds with 21 queries.