ICE

Please login or register.

Login with username, password and session length
Advanced search  

News:

ICETCP.PRO and ICETCP.PLUS are compatible with Windows 11!

Author Topic: Viewing hex high values.  (Read 1826 times)

Miller

  • Jr. Member
  • **
  • Posts: 6
  • Place Personal Text Here
Viewing hex high values.
« on: October 12, 2005, 01:27:11 pm »
Some users are ablt to view hex high values and others are not.  There are not setting ing the ICE application to change this.  We have distinguished that the issue lies in the user profile.  We had to delete and recreate the users profile to let the view the hex high values.  Is there an easier was to do ths?
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
Viewing hex high values.
« Reply #1 on: October 13, 2005, 09:52:52 am »
Some terminal types can do this and others can't. Check to see that the terminal types are all the same as opn the PC's that work the way you want.
Logged

Miller

  • Jr. Member
  • **
  • Posts: 6
  • Place Personal Text Here
Re:Viewing hex high values.
« Reply #2 on: October 13, 2005, 10:39:48 am »
All of our terminals are set to VT220 (7-bit).
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
Viewing hex high values.
« Reply #3 on: October 13, 2005, 12:08:12 pm »
Under profiles -> Terminal Settings -> Advanced

check the box "Disable 8 bit character translation"

Try it both ways to see if it makes any difference. Note that if you change the default profile you'll have to close Pro and restart it.
Logged

Miller

  • Jr. Member
  • **
  • Posts: 6
  • Place Personal Text Here
Re:Viewing hex high values.
« Reply #4 on: October 13, 2005, 02:11:38 pm »
When I do this and hit OK, I get:  Telnet Pro - rims: TelenetPro.exe - Application Error.  The application closes and the changes will not hold.
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
Viewing hex high values.
« Reply #5 on: October 13, 2005, 02:18:34 pm »
Works for me. I change the DEFAULT profile and go out and come back in, check the active profile and it's set. Perhaps you need to update?
Logged

Miller

  • Jr. Member
  • **
  • Posts: 6
  • Place Personal Text Here
Re:Viewing hex high values.
« Reply #6 on: October 13, 2005, 02:22:59 pm »
I tried that on a different maching and I get a half block where the high values are supposed to be at.  It is closer.  At least there is a character there to show the high values.  But I would really like to have the users see the high values.
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
Viewing hex high values.
« Reply #7 on: October 13, 2005, 02:38:00 pm »
Oh, I bet your character set is set wrong in the profile. Make sure it's set to ICE437 and not Courier or some such.

Check all settings against a working machine.
Logged

Miller

  • Jr. Member
  • **
  • Posts: 6
  • Place Personal Text Here
Re:Viewing hex high values.
« Reply #8 on: October 13, 2005, 02:59:48 pm »
I checked all setting s against a working maching.  All settings are the same.  I changed one machine to ICE437 and checked the box "Disable 8 bit character translation"....and I get a half block where the high values are supposed to be at.
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
Viewing hex high values.
« Reply #9 on: October 13, 2005, 04:29:18 pm »
I give. Something is obviously different. If the same version of pro is on both machines, same fonts, same terminal type, same options, same login then the only difference is the PC, right??
Logged
 

Page created in 0.012 seconds with 21 queries.