ICE

Please login or register.

Login with username, password and session length
Advanced search  

News:

ICETCP.PRO and ICETCP.PLUS are compatible with Windows 11!

Author Topic: installing V7.1, 3.0 on winxp laptop  (Read 1724 times)

tham

  • Newbie
  • *
  • Posts: 1
  • Place Personal Text Here
installing V7.1, 3.0 on winxp laptop
« on: November 08, 2005, 12:05:11 pm »

I have an external multitech  MT 5600 CDX modem attached to my laptop via a serial cable.  Have installed the software, and have attempted to dial-out.  I can hear the software dialing the number, but do not get the "handshake" and eventually get an message that says: "no carrier".

Please advise what I should be checking to clear up this problem.

Thank You
tham
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
installing V7.1, 3.0 on winxp laptop
« Reply #1 on: November 08, 2005, 01:05:14 pm »

Your modem is having problems syncing with the unix side. It's a modem issue, not an ICE.OffSite issue.

You can try different baudrates (lots of unix modems are at 9600 baud by default) or try to get the manual for your build in modem to see if you can force it to connect to the unix modem with the same protocols the unix modem supports.

In general, you should lock the interface speed on the modem to at least 38.4k baud and use hardware handshaking.

Though the following thread is for a USR modem, the IDEA is the same...

http://yabb.jriver.com/ice/index.php?board=6;action=display;threadid=224
Logged
 

Page created in 0.014 seconds with 21 queries.