Topic: LPD THIS VERY SLOW ONE (Read 1633 times)

jahuvi · « **on:** September 07, 2005, 11:59:38 am »

I have installed lpd in clients windows xp/2000 prof, when sending an impression work from unix, the work takes a long time too much in arriving at the station windows xp, it is a net LAN and WAN with a firewall CISCO PIX that can be happening.

Bob · « **Reply #1 on:** September 08, 2005, 08:19:36 am »

If you are going over a WAN and you're printing graphics the print job can take a long time, the WAN is probably 20-100 times slower than your LAN.

jahuvi · « **Reply #2 on:** September 08, 2005, 09:22:47 am »

I am not sending impression works with graphics, but if they should go by a firewall cisco, not you that port should enable for the service lpd in my firewall.

Bob · « **Reply #3 on:** September 08, 2005, 10:07:08 am »

Could be a DNS timeout. Are you using MS LPD or the LPD from ICE? If you are using the ICE LPD, try the windows one instead. Note that any version of LPD only works with STATIC IP addresses.

jahuvi · « **Reply #4 on:** September 08, 2005, 06:01:13 pm »

I should enable some port in the firewall.?

Bob · « **Reply #5 on:** September 09, 2005, 08:40:42 am »

LPD uses a range of ports. Traditionally 515 to 521

ICE

News:

Author Topic: LPD THIS VERY SLOW ONE (Read 1633 times)

jahuvi

LPD THIS VERY SLOW ONE

Bob

LPD THIS VERY SLOW ONE

jahuvi

LPD THIS VERY SLOW ONE

Bob

LPD THIS VERY SLOW ONE

jahuvi

LPD THIS VERY SLOW ONE

Bob

LPD THIS VERY SLOW ONE