I like JRiver on Linux, tough playing music with higher bitrates (like 96, 176,4, 192KHZ) the sound is crackling randomly. I tried everything in JRiver: different buffer size, hardwaresynchonisation, playing from memory, but the crackling sound stays. I only have alsa installed, not Pulseaudio.
Advanced Linux Sound Architecture Driver Version k4.2.0-18-lowlatency
With other software, like HQplayer or Audacious I don’t have these crackling sound on higher bitrates, so to me it looks like JRiver is causing these issues. Any suggestions to solve the problem are most appreciated, thanks!
My soundcard:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CMedia [HDA C-Media], device 0: CMI8888 Analog [CMI8888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
cat /proc/asound/card0/codec*
Codec: C-Media CMI8888
Address: 1
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x13f68888
Subsystem Id: 0x13f60001
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x2]: FLOAT
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CMI8888 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Surround Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Side Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Center Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Switch", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x1]: PCM
Node 0x06 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Connection: 1
0x02
Node 0x07 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Connection: 1
0x03
Node 0x08 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=04, enabled=1
Connection: 1
0x04
Node 0x09 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=03, enabled=1
Connection: 1
0x05
Author
Topic: Crackling sound on higher bitrates (Read 3470 times)