INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Screen goes wonky when MC changes TV refresh rate  (Read 1919 times)

Guybrush

  • Regular Member
  • World Citizen
  • ***
  • Posts: 109
Screen goes wonky when MC changes TV refresh rate
« on: February 24, 2016, 04:58:05 pm »

I enable refresh rate changes in display settings which works great so far, in that it selects the correct refresh rate. However the screen resolution blows up (only able to see half the video) and everything goes green. This only happens in ROHQ in fullscreen. I've tried using madVR's display detection but it does not work as I want it to, so I want to get MC's working. And no, I don't have them both enabled simultaneously. Has anyone else seen this?
Logged

Guybrush

  • Regular Member
  • World Citizen
  • ***
  • Posts: 109
Re: Screen goes wonky when MC changes TV refresh rate
« Reply #1 on: February 26, 2016, 10:05:16 am »

No thoughts or other experience with this? Again, the screen goes crazy in the conditions when JRiver has adjusted the refresh rate, I'm using ROHQ, and playing in fullscreen. I still haven't found a fix for this.
Logged

CountryBumkin

  • Citizen of the Universe
  • *****
  • Posts: 3352
Re: Screen goes wonky when MC changes TV refresh rate
« Reply #2 on: February 26, 2016, 11:01:42 am »

What Video card are you using?
Also what OS?

What refresh-resolution rate is causing the problem?
Logged

Guybrush

  • Regular Member
  • World Citizen
  • ***
  • Posts: 109
Re: Screen goes wonky when MC changes TV refresh rate
« Reply #3 on: February 26, 2016, 11:12:05 am »

What Video card are you using?
Also what OS?

What refresh-resolution rate is causing the problem?

I have a 980Ti on Windows 10. Refresh rate of 23Hz and 60Hz cause problems. I can manually change the refresh rate to those in the Nvidia control panel and everything works fine. It is only when MC changes it for me. And I have confirmed that it is changing it correctly.
Logged

eam81969

  • Recent member
  • *
  • Posts: 23
Re: Screen goes wonky when MC changes TV refresh rate
« Reply #4 on: February 27, 2016, 10:14:35 am »

I had a similar, though not identical, problem.  The video would start playing before all of the hardware was ready.   This happened every time I switched refresh rates.  By setting the "Video -> Display Settings - Wait After Change" to 2 seconds, the problem went away. 
Logged
i5-6500 6M Skylake Quad-Core 3.2 GHz LGA 1151 w/Intel HD Graphics 530
ASRock H170M Pro4 LGA 1151 Intel H170 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Mobo
8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000)
HGST Deskstar NAS 4TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" HD
DVDFab
Windows 10
JRMark: 4405
Pages: [1]   Go Up