Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Manfred]

Since ~2 weeks I had the issue that my Media Renderer (PC with MC) crashes after 5-15 min video or audio play. No error message - only in win event log - win unexpected error. 2 weeks ago I changed the motherboard to MSI B250M Gaming Pro and in the meantime I did a fresh install of win 10 Pro.

Symptoms:

- Crash:Stop audio/video play -> automatic reboot
- Crash: Stop audio/video play -> automatic shut down of the PC, after a few minutes press the power button of the psu on/off, I could again power on the PC

Today it was crashing (rebooting) during MC 24 install.

I have all the newest drivers, newest bios version.

Before I had an Asus Mainboard. No Problems.

Any ideas?

[JimH]

- Crash: Stop audio/video play -> automatic shut down of the PC, after a few minutes press the power button of the psu on/off, I could again power on the PC

Heat?  Too high a temperature?

Are you overclocking?

[Manfred]

No Overclocking : Temps of CPU < 41 degree. GPU Temps seem also ok. Idle 40 degree.

The only strange thinks what I see in the board explorer of MSI mainboard is Z chipset instead ob B250 Chipset? and Board Explorer does not see my SOtm Usb card.

[JimH]

A bad driver could also do that.

[Manfred]

In the early morning I powered the PC on, no other SW running also no MC. After 2h the PC has powered down. I will investigate that a little bit further during the next days.

[Manfred]

I think I got it!

In my earlier Asus Board: if you have an m.2 SSD SATA 6 was not usable. So I used SATA 1 for my BD Drive. Switching to my new MSI mainboard I also used SATA 1 (Sorry I did not read the "lovely" manual ) but in the MSI world SATA 1 is not usable if you have an m.2 SSD. Switching the SATA cable to port 5 solved the problem. I play video for hours - no problem so far.