More > JRiver Media Center 31 for Windows
Possible to use profiles to switch between projectors?
FenceMan:
--- Quote from: Hoi on July 13, 2023, 06:55:36 pm ---My 4090 GPU has 1 HDMI and 3 DP ports, I use 3 displays. I have the HDMI port connected to my LG OLED and DP1 & DP2 (DP to HDMI cable) going to my preamp. The HDMI OUT1 on the preamp is connected to my JVC NX7, the HDMI OUT2 is connected to the JVC RS500. All of my different JRVR HDR settings are saved and are automatically loaded depending on which display is active.
I used to use a splitter and had to manually change the settings each time.
--- End quote ---
Are you just duplicating desktop on all displays?
Right now I have (3) cables out of my 4070, one goes to 330-3D-HC projector, one to Runco LS-10i projector, and one to my Emotiva AVR.
The problem is JRVR only sees the Runco projector, even if I switch it off and power on the 330, I only have option to change settings for one of the projectors?
Edit - should I use three different displays (see attached) and then switch which is primary with a keyboard shortcut? If so how do I do that?
jmone:
I'd guess that you would config each separately (in JRVR) and as long as that was the only one active at the time you would be good to go (with the correct setting being applied automatically).
FenceMan:
--- Quote from: jmone on July 19, 2023, 06:41:49 am ---I'd guess that you would config each separately (in JRVR) and as long as that was the only one active at the time you would be good to go (with the correct setting being applied automatically).
--- End quote ---
I got it.
There is a multi monitor tool - https://www.nirsoft.net/utils/multi_monitor_tool.html
I setup batch files -
Runco.bat runs C:\Users\dishn\Desktop\MMT\MultiMonitorTool.exe /SetPrimary 1
Digital Projection.bat runs C:\Users\dishn\Desktop\MMT\MultiMonitorTool.exe /SetPrimary 2
JRVR correctly uses the options for whichever monitor is primary so everything is good.
Probably a more elegant way to do the switch like a keyboard shortcut to run the batch files but I will work on that.
Ah Windows can even do this using shortcuts so now ctrl+alt+R switches to Runco and ctrl+alt+D switches to Digital Projection.
MadVR doesn't play nice like this so +1 JRVR.
JimH:
--- Quote from: FenceMan on July 19, 2023, 06:44:27 am ---I setup batch files -
Runco.bat runs C:\Users\dishn\Desktop\MMT\MultiMonitorTool.exe /SetPrimary 1
Digital Projection.bat runs C:\Users\dishn\Desktop\MMT\MultiMonitorTool.exe /SetPrimary 2
...
--- End quote ---
You should be able to use Zones with different video settings and ZoneSwitch to change to the zone you want. [Wiki]
mattkhan:
--- Quote from: JimH on July 19, 2023, 08:04:06 am ---You should be able to use Zones with different video settings and ZoneSwitch to change to the zone you want. [Wiki]
--- End quote ---
Jrvr profiles are separate to zoneswitch so you can't really do that
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version