INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Direct Sound & Multi-Zone Operation  (Read 1443 times)

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3091
Direct Sound & Multi-Zone Operation
« on: June 29, 2004, 04:12:09 pm »

I'm trying to set up multiple zones by using my motherboard's built-in sound  (Realtek AC'97).  I can set it up such that there are 4 speakers which turn the line-in port to be a rear speaker output.  I can then select "Direct Sound" in MC and route sound for my first zone to "Left Front + Right Front" and the second zone to the "Left Rear + Right Rear".  This works in that I do hear the correct music for the second zone but the problem is that I also clearly hear the music from the first zone if it is playing.  So, I have a nasty mix of two songs.  Am I doing something wrong or is this not supposed to work??
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42323
  • Shoes gone again!
Re:Direct Sound & Multi-Zone Operation
« Reply #1 on: June 29, 2004, 07:26:40 pm »

This same setup works fine on my SoundBlaster.

Check with the sound card's configuration panel to see if it's doing some sort of mixing or effects.  Also, mute unused lines.
Logged
Matt Ashland, JRiver Media Center

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3091
Re:Direct Sound & Multi-Zone Operation
« Reply #2 on: June 30, 2004, 10:21:44 am »

Thanks for the response.  There must be some setting that I'm not able to find, because I can't stop the "mixing".  The good news is that if I set it to 6 speakers and use the "Left Rear + Right Rear" and "Center + Subwoofer" channels and don't use the "Left Front + Right Front" at all there is no mixing.  Fortunately I only need 2 analog zones at this point...
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re:Direct Sound & Multi-Zone Operation
« Reply #3 on: June 30, 2004, 06:04:30 pm »

These built-in sound cards have a lot of weird stuff going on. I have never gotten them reliable for multi-zone use. The cheapest option is a used Live! 5.1. That will give you three zones without any problems if you use the kX Drivers.
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

kaiynne

  • Regular Member
  • World Citizen
  • ***
  • Posts: 225
  • I Changed this by choosing profile
Re:Direct Sound & Multi-Zone Operation
« Reply #4 on: June 30, 2004, 06:59:54 pm »

I am really curious about what you are trying to do, I hope that I read it correctly.  

Would it be possible for me to set up a second zone using the built in soundcard on my MB and route it somehow through one of the unused channels on my 7.1 reciever?

Is this actually possible?  If so any links to info on how I might set it up?

thanks,
Kain
Logged

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3091
Re:Direct Sound & Multi-Zone Operation
« Reply #5 on: June 30, 2004, 09:31:11 pm »

You would be able to set up a zone with the built-in soundcard and route the analog output to an analog input on your receiver.  If you mean to route it through one of the "channels" in the digital stream I don't think there is any way to do that.
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re:Direct Sound & Multi-Zone Operation
« Reply #6 on: July 01, 2004, 01:39:23 am »

Kain, you may be "able" ( ;D) to see some of that by looking at my webpage, how I have solved my whole house system.
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system
Pages: [1]   Go Up