INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Can't get multi zone working on the SBLive!  (Read 1759 times)

m00j

  • Recent member
  • *
  • Posts: 11
Can't get multi zone working on the SBLive!
« on: December 29, 2004, 11:13:33 pm »

I cannot get multi zone to work on my sound blaster live no matter what settings I try.

for every setting it always still plays out of the front left/right.

I am using the KX drivers and tried mapping the zones through wave out, direct sound and ASIO but all to no avail.

Is there another setting that needs to be changed?  Perhaps in the KX drivers?  The Output setting in the zone manager was the only thing I was changing.

Could anyone walk me through the steps to setting it up?

Thank you.
Logged

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3105
Re: Can't get multi zone working on the SBLive!
« Reply #1 on: December 30, 2004, 10:33:35 am »

I'm not sure what version of the card you have.  I have the "Value" version and could not get multizone to work until I unchecked the "swap front and rear" option on the main config page.  It is the first one in the row underneath the sliders.
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re: Can't get multi zone working on the SBLive!
« Reply #2 on: December 30, 2004, 03:57:29 pm »

Anybody calling my name?  ;) You need to go into the kX DSP (right click on the icon in the tray and choose router). Right click on the Surrounder (upper right part of the screen, before timbre) and choose Tweak. Then set the speaker mode to 5.1 (providing this is a Live! 5.1 card) and surround to off. Also tick "Use subwoofer output". That should have you up and running.
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

m00j

  • Recent member
  • *
  • Posts: 11
Re: Can't get multi zone working on the SBLive!
« Reply #3 on: December 31, 2004, 03:17:19 am »

Hmm, I just tried that but in my preliminary testing it does not seem to work Mastiff. :(  I might have missed something though, I guess I will find out in the new year when I check properly!

cncb, where is this swap front/rear option?  I do have a value card, but I am using it with the KX drivers not the standard creative drivers.  I can't find the option anywhere :(
Logged

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3105
Re: Swap Front And Rear
« Reply #4 on: December 31, 2004, 07:50:08 am »

Double-click the kX icon on the task-bar.  For me it is on the initial page that comes up.  It is right below the first set of volume sliders.  It has an icon with 2 speakers and 2 arrows.
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

m00j

  • Recent member
  • *
  • Posts: 11
Re: Can't get multi zone working on the SBLive!
« Reply #5 on: December 31, 2004, 09:59:11 pm »

ah! found it cncb!  Thanks!

I can't test it yet thought as the computer is in the other room, connected through the home theatre amp (for testing) and some family members are watching a DVD at the moment.  But I did find it and toggle it off.


*edit*:  Tested and it works now, thanks for the help guys!
Logged

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re: Can't get multi zone working on the SBLive!
« Reply #6 on: January 01, 2005, 03:37:40 am »

No problem.
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3105
Re: Can't get multi zone working on the SBLive!
« Reply #7 on: January 01, 2005, 09:55:05 am »

You're welcome.  Something I found interesting about this card.  The yellow digital out connector actually carries the front and rear digital stereo signals.  So, you can connect a 1/8" to 2-RCA audio cable and have 2 digital coax signals to match the analog.
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re: Can't get multi zone working on the SBLive!
« Reply #8 on: January 01, 2005, 08:05:37 pm »

Man, I didn't know that! Interesting! That has to be possible to use in my system in one way or another... Is that with the kX Drivers or the original drivers?
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3105
Re: Can't get multi zone working on the SBLive!
« Reply #9 on: January 01, 2005, 09:10:26 pm »

I'm using the kX drivers but I think the 2 digital outputs for front and rear are still available with the original drivers.  I don't know if you can route two different stereo signals to the front and rear outputs with the original drivers, though (I never tried it).
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re: Can't get multi zone working on the SBLive!
« Reply #10 on: January 02, 2005, 02:51:51 pm »

Thanks! I will be trying that, then.
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3105
Re: Can't get multi zone working on the SBLive!
« Reply #11 on: January 03, 2005, 01:46:38 pm »

No problem.  The only thing missing on this card is a digital input (I'm forced to use the analog input for sync).
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re: Can't get multi zone working on the SBLive!
« Reply #12 on: January 04, 2005, 01:40:25 am »

Really? I've got that on my SBLive! cards, the only thing is that it is inside the pc case (SPDIF in for CD ROM player wors just as well as any jack - just make an adapter cable yourself).
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

cncb

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3105
Re: Can't get multi zone working on the SBLive!
« Reply #13 on: January 04, 2005, 09:14:17 am »

Yeah, I meant external - but that's a good idea.  The problem is that my "main" soundcard only has optical out so by the time I buy a converter and make an adapter cable I probably could have just bought a new card with digital in...
Logged
-Craig    MO 4Media remote and player:  Android/TV/Auto | iOS | Windows 10/UWP

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re: Can't get multi zone working on the SBLive!
« Reply #14 on: January 04, 2005, 03:32:03 pm »

I'd suggest you get one with coax out, since that's a lot easier to send on to other sound cards. You just solder a splitter, with a bunch of cables, and you're ready to go. I've got one with only optical too, it's called Gainward Hollywood @ Home, and of course I only use that for movies...  ;D It's the card used for my HT.
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

m00j

  • Recent member
  • *
  • Posts: 11
Re: Can't get multi zone working on the SBLive!
« Reply #15 on: January 05, 2005, 10:15:39 pm »

one more quick question, does anyone know if the Sound Blaster Live 24-bit works well for multizone?

I can get them easily and cheaply at my local computer store.  Also, since they are a 7.1 sound card can you get 4 zones out of it?

Thanks
Logged
Pages: [1]   Go Up