INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Please update Replay Gain Analysis with EBU R128  (Read 5796 times)

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Please update Replay Gain Analysis with EBU R128
« on: January 30, 2012, 01:39:24 am »

I was working on calibrating the gain of my system to 83 dB SPL with -20 dB rms pink noise which is the newer industry standard for music using the "K-System". Replay gain correlates OK with the K-20 meters, however, it would be great if you could update MC audio analysis (now using Replay Gain) to use the new R128 loudness standard.
Code here: http://r128gain.sourceforge.net/

BTW this gain setting works for video reference level too.

Read all about it here:http://www.digido.com/level-practices-part-2-includes-the-k-system.html
and here: http://tech.ebu.ch/loudness

I used this VST K-Meter plug-in: http://www.audiopluggers.com/kmeter/index.html


Here's a free VST meter AC-R128: https://www.audiocation.de/en/plugin


Logged

StuckMojo

  • Regular Member
  • Galactic Citizen
  • ****
  • Posts: 381
  • Change this by choosing profile
Re: Please replace Replay Gain Analysis with EBU R128
« Reply #1 on: January 30, 2012, 01:45:34 am »

If it works also fine with Video Files....

THUMBS UP!!!
Logged
Lian Li PC-C60B HTPC Case
(Soundgraph Imon Display + Remote Control)
Asus M4A87TD/USB3 + 8GB DDR3
AMD Athlon II X4 605e 4x2,3Ghz (45W TDP)
Onkyo TX-NR906
Teufel System 5 THX Select 2

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Please update Replay Gain Analysis with EBU R128
« Reply #2 on: January 31, 2012, 12:17:22 am »

I never really explained why I want this change. My system is capable of getting way too loud with some recordings. That power is great on the transient of a snare drum but it can just be too loud on many "loudness maximized" cd's. Replay Gain or more recently R128 is a great solution to set all music to a "reference" maximum volume level that is loud enough for most of us.

1. Analyze your music per R128 K-20 (similar to replay gain) and turn on volume levelling.
2. The meters below will read 0 average signal level on loud passages if everything is working as intended.
3. Set up so -20 dB rms pink noise is 83 dB out of a single channel in the listening position (digital volume @ 100%).
4. Now leave your amplifier gain alone and use internal digital volume in JRiver.
5. 100% volume will be the same loudness for all your music and it will be referenced to a known standard. If you want to discuss how loud you like a song you can just mention what % of reference volume you listen at.

Logged
Pages: [1]   Go Up