INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100  (Read 6097 times)

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« on: December 28, 2014, 04:35:20 am »
Hello

I started a post on the Mac Forum but it looks like it should be here !

http://yabb.jriver.com/interact/index.php?topic=94396.msg650396#msg650396

In summary
"
When I play DSD 128 file, JRiver will play only half of the file (basically the time displayed when playing is divided by 2 versus the normal duration and it will switch to the new song at the middle of the song and so on...)
There is no issue with DSD 64.
Also when I play the music on my MacBook directly this is also fine. It is only the DLNA that is causing troubles with the renderer SOTM SMS-100.
My rendere and Dac are both compatible 128 so I cannot see any reason why it does happen like that.
Is there any setting to do in JRiver ? or with the renderer SMS-100 ?
Why is the DoP conversation not working for DSD 128 file ?
"
Thanks and Regards
philoouu
Logged

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #1 on: January 02, 2015, 09:49:19 pm »
Hello

The bug does not happen with other solution like Audionet/MinimServer....
It looks like the issue is on Media Center 20.

Thanks for your investigations

Regards
philoouu
Logged

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #2 on: January 05, 2015, 07:06:57 pm »
Hello JRiver Team
Can you investigate the issue when you get a chance ?
Thanks
Philoouu
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42444
  • Shoes gone again!
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #3 on: January 05, 2015, 08:51:12 pm »
Thanks for your patience.  Bob is looking into it.
Logged
Matt Ashland, JRiver Media Center

bob

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 13941
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #4 on: January 06, 2015, 03:56:18 pm »
What are your audio settings in the MC DLNA server?
Specifically, what is the Specified output format?
Are any of the DSP studio settings under audio advanced settings enabled?
I assume you have the DoPE flag set under the general advanced settings for that DLNA server?
Logged

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #5 on: January 06, 2015, 06:29:26 pm »
Quote from: bob on January 06, 2015, 03:56:18 pm
What are your audio settings in the MC DLNA server?
Specifically, what is the Specified output format?
Are any of the DSP studio settings under audio advanced settings enabled?
I assume you have the DoPE flag set under the general advanced settings for that DLNA server?


Hello Bob

Thanks for coming back.
I have attached all the setting on the Mac Forum. Let me attach them here again.
Does not look like I can enable DSP studio settings under advanced settings. It is greyed for Generic DLNA when Stereo Downmix and Volume leveling are checked . Let me know if I should modify my setting here. Those settings works fine for DSD 64 files.
DoPE flag is checked.

Basically Sotm support has tested the same set-up than me (SMS-100 renderer, same DAC 128 DSD compatible, JRiver with the same settings and same audio files I have sent them). They could reproduce the same issues (file cut in 2, will switch to the new song at the middle of the song)
It seems to work with other solution than JRiver as I wrote earlier.

Regards
philoouu
Logged

bob

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 13941
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #6 on: January 08, 2015, 10:31:55 am »
Quote from: philoouu on January 06, 2015, 06:29:26 pm
Hello Bob

Thanks for coming back.
I have attached all the setting on the Mac Forum. Let me attach them here again.
Does not look like I can enable DSP studio settings under advanced settings. It is greyed for Generic DLNA when Stereo Downmix and Volume leveling are checked . Let me know if I should modify my setting here. Those settings works fine for DSD 64 files.
DoPE flag is checked.

Basically Sotm support has tested the same set-up than me (SMS-100 renderer, same DAC 128 DSD compatible, JRiver with the same settings and same audio files I have sent them). They could reproduce the same issues (file cut in 2, will switch to the new song at the middle of the song)
It seems to work with other solution than JRiver as I wrote earlier.

Regards
philoouu

Ok, thanks, we'll give it a spin here.
Logged

bob

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 13941
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #7 on: January 08, 2015, 05:23:13 pm »
It was a generic issue with all >1x dsd over DLNA and DoPe.
Fixed in the next build.
Logged

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #8 on: January 08, 2015, 05:57:24 pm »
Hello Bob

Thanks !!! That was efficient !
When is the next build ?

Regartds
philoouu
Logged

bob

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 13941
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #9 on: January 09, 2015, 10:25:24 am »
Hard to say exactly. Just keep your eye out for the next announcement on the MC20 board.
Logged

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #10 on: January 09, 2015, 10:50:18 pm »
Thanks
Will watch closely !
Logged

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #11 on: January 13, 2015, 07:40:47 am »
Quote from: bob on January 09, 2015, 10:25:24 am
Hard to say exactly. Just keep your eye out for the next announcement on the MC20 board.


Hi Bob

Just testing 20.0.54
Thanks, it  sounds very good.
one more thing tough; at the end of each song in DSD 128 (more difficult to reproduce with DSD 64) there is a click before it goes to the next sound (same set-up SMS-100 in DOPE with DSD 128 file).
If you move the cursor to jump a few seconds/minutes forward during a song, you have the same click.
Can you have a look ?
Thanks and regards
philoouu
Logged

philoouu

  • Junior Woodchuck
  • **
  • Posts: 80
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #12 on: January 20, 2015, 08:03:48 pm »
Hi Bob

I still have the click noise between songs in DSD 128 with renderer,
I am trying to ask some people to test with the same set-up as me but on a Windows version. Apparently the Windows version has not been fixed (I mean still plays only half of the song). Can you fix it too so that we can start to make some comparisons ?

Thanks
philoouu

Logged

bob

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 13941
Re: DSD File 64 (2.8 Mhz) versus 128 (5.6 Mhz) with Renderer SMS-100
« Reply #13 on: January 22, 2015, 10:19:33 am »
Quote from: philoouu on January 20, 2015, 08:03:48 pm
Hi Bob

I still have the click noise between songs in DSD 128 with renderer,
I am trying to ask some people to test with the same set-up as me but on a Windows version. Apparently the Windows version has not been fixed (I mean still plays only half of the song). Can you fix it too so that we can start to make some comparisons ?


I'm certain the latest Windows build (20.0.61) has the fix.
It would be good to get some tests cross platform as well as with different devices.
We don't have a DLNA renderer here that supports DSD  to test with, we've been testing with MC as a renderer attached to a USB DAC.
Logged
Pages: [1]   Go Up
« previous next »