INTERACT FORUM

I do have the older  X - HD , I used prior to the Mac...that was windows....
so can I plug that in the Mac and it will ask me  to format  it ... or ? because used previously ...

I'll suspect any info on it..will be erased ?  or need to be erased  ?
  before  I can  use  it now , as  mentioned,  for the music ?

thanx

Drat, same as mine, so no idea why it works/blanks for you according to delay and it doesn't for me. Until I get the display to blank according to the delay specified, I don't think there is any point in going further.

Can you share any options you've changed in video settings or JRVR settings that might cause this difference? Are you using bitstreaming for audio? I do, maybe it does something when playback starts that causes this.

Nothing really changed.  Yes bitstreaming for sure.  So definitely not the issue there.

My desktop is 120 10 bit rgb in the nVidia cp

JRiver:
Display Settings automatic change mode: Custom
Wait after change (use if display changes slowly): 1 second
FILM (23.976): 3840x2160 - 32 bit @ 119 Hz
FILM( 24): 3840x2160 - 32 bit @ 120 Hz

The rest are set to Desktop Settings

Drat, same as mine, so no idea why it works/blanks for you according to delay and it doesn't for me. Until I get the display to blank according to the delay specified, I don't think there is any point in going further.

Can you share any options you've changed in video settings or JRVR settings that might cause this difference? Are you using bitstreaming for audio? I do, maybe it does something when playback starts that causes this.

My desktop is 120 10 bit rgb in the nVidia cp

JRiver:
Display Settings automatic change mode: Custom
Wait after change (use if display changes slowly): 1 second
FILM (23.976): 3840x2160 - 32 bit @ 119 Hz
FILM( 24): 3840x2160 - 32 bit @ 120 Hz

The rest are set to Desktop Settings

Just to be sure, I sent you the zip by mail yesterday @bob

Yes there's a very visible difference for me.  When I initially went from 0.5 to 2, it basically blanks the screen for 2 seconds before activating HDR mode.  At least on my G2 that's what it does.  2 is far too long for my taste so I'm happy it works at 1.  It does not, however, work at 0.5 for me.

Thanks, so that’s the first thing I have to resolve, and probably why it doesn’t help in my case. Changing the delay doesn’t make any difference here (no blanking at all, even with 5 or 15 secs). Have you tried with a 119p or 120p default refresh rate, going to 119p or 120p? Maybe you can reproduce what I experience if you mirror this.

Otherwise please tell me what your options are and I’ll try to see what’s different.

Quick question: When you change the refresh rate delay in the settings, does it do anything visibly (apart from solving the metadata issue)? Here there is no difference at all whether the delay is 0.5s or 15s. Is that normal?

Yes there's a very visible difference for me.  When I initially went from 0.5 to 2, it basically blanks the screen for 2 seconds before activating HDR mode.  At least on my G2 that's what it does.  2 is far too long for my taste so I'm happy it works at 1.  It does not, however, work at 0.5 for me.

546.65 like you (I just reverted a couple days ago based on the doom9 thread).  Windows 11 which just updated itself to 24h2 but I doubt anything's changed with that.

Quick question: When you change the refresh rate delay in the settings, does it do anything visibly (apart from solving the metadata issue)? Here there is no difference at all whether the delay is 0.5s or 15s. Is that normal?

@Hendrik: One more thing I noticed, if you enable OS HDR manually before playback, the HDR metadat is always correct, but if you enable HDR to HDR tonemapping back and forth, instead of switching between the original metadata (passthrough) and the HDR to HDR metadata (peak target) you get empty metadata again. Can you reproduce this? If so, this might help you to locate the part of the code that sends empty metadata, because that should never be the case.

If you find a file that causes it, we'd like to see it. A log might show you something.

I did some troubleshooting and discovered that my library backup caused the problem. So I cleared the library to a point where the Theaterview would work then restored the library with only the settings and it worked, then did the opposite and Theaterview crashed. It is something in the files section of the library backup. Still working isolating the culprit.

Regards