INTERACT FORUM
More => Old Versions => JRiver Media Center 29 for Mac => Topic started by: jhamilton9 on August 07, 2022, 02:27:49 pm
-
I can't get audio to my external speakers using the USB sound device selection in Media Center. If I select Core audio the music plays to the Mac's internal speakers. I occasionally get sound to one external channel and when reversing the R & L balance cables the sound switches to the opposite speaker. My amp & preamp have been recently checked by the manufacturer and don't think they are causing the problem.
Does anyone know what might be causing the problem?
-
What is the USB connected to? Does it need a driver?
-
The USB is connected to my amplifier’ internal DAC
-
What amplifier? USB on most can't be used for an audio connection. It would be worth reading the amplifier's manual to see what they say about USB.
-
My amplifier is an Audio Alchemy and I’ve used the USB successfully in the past creating audio to the external speakers. Getting the audio to work properly has always been difficult but this time no luck. You can see the music playing in the Media Center app but no sound on my external speakers or the MacBook internal speakers.
-
You should try another player like VLC or another free player. You can even try something like youtube via a web browser. See if it can play to your DAC inside your amp. If it CAN, then we probably need to adjust something in MC's settings.
Brian.
-
I have sound on one channel using MC 29. Youtube works on one channel as well. I've reversed the speaking wires and the sound switches to the opposite speaker. That tells me the speakers aren't damaged.
Thanks for your comments.
-
I'm confused as to where your DAC is. Do you have RCA or XLR cables running from your DAC to some other device, like a preamp? If the DAC is inside the preamp, are there RCA or XLR cables that connect the preamp to the amp?
If you have RCA cables involved, I would try to verify that both RCA cables are working. Hook up one RCA cable at a time so you can be sure that the cable itself works. Try one cable on left and right. Try the other cable on left and right. Doing a process like this can help you find out where the signal stops. You could even have a bad speaker wire. I've actually seen that happen before.
It's quite difficult to troubleshoot this with just words and no system diagram. I suspect that, because your computer with a different program (YouTube in a web browser) only plays on one channel, that you have a system issue and not a computer issue. It could be any of the components.
It might be helpful to have another source like a CD player or FM tuner etc.
Good luck with your troubleshooting.
Brian.
-
I’m using XLR cables and the DAC is inside the preamp. I don’t’ think it’s a bad speaker wire because when reversing the speaker wire the opposite speaker works.
I think your right that it’s a system issue. I’ll keep plugging away at a fix. I’m waiting hear from the manufacturer of the components for their comments.
Thanks again for your insights.
-
I would suggest hooking up the XLR cables one at a time. If you do this, you can:
1. Verify that each XLR cable works.
2. Verify whether or not each preamp output works.
3. Verify whether or not each amp channel works.
I think it would tell you a lot.
Best of luck. I'm good at this kind of troubleshooting as I was in the stereo business for many years. If you do it methodically, it's actually very satisfying once you reach a conclusion.
Brian.