INTERACT FORUM

More => Music, Movies, Politics, and Other Cheap Thrills => Topic started by: DarkPenguin on February 17, 2021, 09:13:46 pm

Title: There's the problem
Post by: DarkPenguin on February 17, 2021, 09:13:46 pm

See it?

(https://www.smrlabs.com/wp/wp-content/uploads/2021/02/IMG_20210129_1510323032.jpg)

Title: Re: There's the problem
Post by: BillT on February 18, 2021, 02:43:19 am

The speaker connections of one channel connected to the power supply?

Title: Re: There's the problem
Post by: zybex on February 18, 2021, 04:29:44 am

Blown SMT resistor/diode/capacitor near the large inductor? Hard to see if it's really missing or just a scratch on the picture...
Or is it the output GND left hanging because the black cable is the wrong way around?

Title: Re: There's the problem
Post by: DarkPenguin on February 18, 2021, 06:39:15 pm

I soldered the balanced input on the one channel backwards and took everything on that side to ground.

The issue had to be with something I did and yet I checked so much of the boards before looking at my own work. Odd.

Title: Re: There's the problem
Post by: JimH on February 18, 2021, 06:57:36 pm

I always think it's someone else.  Hard to sell sometimes.