INTERACT FORUM
More => Old Versions => Media Center 17 => Topic started by: richardap on October 21, 2011, 03:12:08 am
-
Is there still no ability to Volume level on sync. Pretty much every other player does that.
-
Purlease.....a unified View Library so you only have to set up your views once and can then allocate them to whatever areas you want, i.e. client UI, DLNA, Theater View, Gizmo...
And...a UI for tablets/phones/handhelds (DLNA control point with built-in renderer) that is as slick as Theater View. I'm afraid the Web Remote/Play interface, while clever as a proof of concept, is horribly antiquated and looks and feels like a web site from the late 90s, and I feel therefore controller aspect of the "whole house" scenario has been neglected. Not everyone wishes to sit at a PC or to have a PC in the living room and switch the TV on just control and listen to music.
And....separation of the server component from the client and maybe hopefully the server can then be ported to Linux for a NAS unit, which again would be more in keeping with networked whole-house scenario - a low power and quiet server for the while house, because unless you're using a HTPC for rendering or need video transcoding, then it's a real waste running a complete PC just to serve files.
-
And...a UI for tablets/phones/handhelds (DLNA control point with built-in renderer) that is as slick as Theater View. I'm afraid the Web Remote/Play interface, while clever as a proof of concept, is horribly antiquated and looks and feels like a web site from the late 90s, and I feel therefore controller aspect of the "whole housbe" scenario has been neglected. Not everyone wishes to sit at a PC or to have a PC in the living room and switch the TV on just control and listen to music.
Have you tried Gizmo?
-
No - I have an iPad! Bought it purely for UPnP control software, I'd been waiting for something like this for years, a hand-held browser at the comfort of my own living room chair of my complete music collection, orgnaised the way I want it, through which I could despatch music to anywhere I wanted. I'd previously been using Meedio and a beefy PC in the living room with a dual-output graphics card and a touchscreen monitor - but there were lots of wires involved, the monitor was too heavy, and Meedio wasn't completely geared up for touchscreen use and dual screens, and could only output to the graphics/sound card.
I use PlugPlayer on the iPad but development of that seems to have stifled too, it seems stuck at being a text-based browser and is too hung on the concept of having to select all the items you want to play and add them to a playlist before you start playing. I don't understand why a DLNA browser should work any differently from a local media browser as far as the user experience is concerned. (You can toggle between that "playlist" mode and a "tap to play" mode but you have to exit the application and go into the Settings app to do that, and even then when you tap on a single item it adds the whole folder to the queue... Also a few other annoying features like if a folder contains more than 30 items then it automatically sorts the items alphabetically and ignores the order they were returned in from the server.)
-
Take a look at the Samsung Galaxy Tab. I like the 8.9 size. Gizmo on it is exactly what you're looking for.
http://yabb.jriver.com/interact/index.php?topic=66666.0
This is a new third party plug-in:
http://yabb.jriver.com/interact/index.php?topic=67120.0
-
It would be nice to be able to see what Gizmo can do before spending another £400-£500.... http://yabb.jriver.com/interact/index.php?topic=63514.0
The third party app looks interesting - thanks for the link, I'll look into it.
-
Youtube movie:
http://yabb.jriver.com/interact/index.php?topic=67153.msg450338
-
Purlease.....a unified View Library so you only have to set up your views once and can then allocate them to whatever areas you want, i.e. client UI, DLNA, Theater View, Gizmo...
And....separation of the server component from the client and maybe hopefully the server can then be ported to Linux for a NAS unit, which again would be more in keeping with networked whole-house scenario - a low power and quiet server for the while house, because unless you're using a HTPC for rendering or need video transcoding, then it's a real waste running a complete PC just to serve files.
Unified views shared amongst the modules in MC would be outstanding. I don't want to create a view scheme, a Theater View and a Gizmo view to all show me the same things in basically the same way.
This has really kept me from bothering to create any of the views I really want, since I have to do it multiple times, then "fix" the things that didn't do exactly what I wanted, in multiple places, for several views; blah, not worth it :(
As for the library server being separated from the client side; this needs to be done some day, no way around it.
I'm hoping V17 is the time, but I suspect this might be held back for V18, I hope I'm wrong :)
-
Have you tried Gizmo?
Gizmo is very nice, but it would be nice if it was a bit more flexible, It's limited to the "Native" commands, i think yo at least shold be able to add a custom command for anything that is a mcc-command (or several).
I also agree the server-part cold see a bit more work, I am just longing to run MC on a client-server model, but its a bit to limit still.
-
I would love to be able to sync my android over wireless with MC17. Maybe just a small server app that runs on the android that MC connects to as a device.
Also still waiting on volume leveling during sync as well. Since no player I can find on android supports replaygain at the moment, which I can't understand.
-
The ability to hide/turn off/disbale play doctor. I'd upgrade instantly!
-
Hi,
For the moment I have just one request.
Is it possible to implement web browser integrated in Media center with a zoom function ?
For my part I would really appreciate bigger font and bigger pictures when I use media center web browser on my TV or my videoprojector screen. :)
-
I also agree the server-part cold see a bit more work, I am just longing to run MC on a client-server model, but its a bit to limit still.
Absolutely agree: http://yabb.jriver.com/interact/index.php?topic=66587.msg450456#msg450456 (http://yabb.jriver.com/interact/index.php?topic=66587.msg450456#msg450456)
-
TV section -> MDAPI filter support in order to watch subscribed encrypted channels
This feature would open a wider market. It's the only missing feature for my use that i would not upgrade to MC17.
Is it possible in a next release?
-
I would really appreciate bigger font and bigger pictures when I use media center web browser on my TV
+1 ;D
-
Have access control work so each device connected to the server can have is own control over access to the server media, so different devices or locations can view different items.
Also if that is not possible, can access to access control screen be added to future gizmo update, and to devices that support keyboards.
Thanks.
Great work
-
As previously requested ;D, Automatic Switch of Views Depending on the Media Type Playing.
In my scenario of mixed media type playlists, I would like MC to display Theater View Playing Now for audio tracks (I love the Online Media Slideshow) and to automatically switch to Display View for Music Videos.
I wonder if anyone else would be interested ;)
-
TV section -> MDAPI filter support in order to watch subscribed encrypted channels
This feature would open a wider market. It's the only missing feature for my use that i would not upgrade to MC17.
Is it possible in a next release?
This would really put MC17 ahead of the curve.
SBR
-
Access to TV Guide and ability to schedule recordings via Gizmo.
-
Any chance we will see some improvements to Artist Images in Theater View? It's a cool feature but could use some improvements, most notably the ability to use local images.
-
Any chance of improving Memory Play. More stored in memory...or even better decoded to wave to memory.
-
I upgraded to MC17 today, hoping this can be added:
- When connected to a library server, option to "import" a song from the remote library to a local library, the selected file would be copied to a folder on the local machine and added to the local library. A cool feature already in other products, MC cant be behind.
- More Flexibility with Red October, I Love it for movies but what if I want to play a file wich Red October can't play (eg. Karaoke files)? I need to change to windows merit for those and go back to RO for movies, because some of my filters dont even work after RO appeared (not in white list?) so or I quit the movies or the karaoke files. Maybe an option in File Types to avoid using RO with the selected extension.
- Build Cache in the background is great, but I find quite sad that only 3 options avalaible, a full encoder window as in handheld required.
- Teather View: More views dedicated for movies and Tv Shows, maybe a modded 3D Showroom specially for movies.
- iDevices Sync: apple is here to stay, so I hope we can make another try with those products, I dont mind sync trough itunes but make it easy and bug-free!, or native sync for jailbroken devices.
- If you have a view grouped by album artist and in one group you have different artist, the Artist Image should be from album artist instead of the covers of the albums
-
Complete whole Android/smartphone support.
Able to sync music, video, and pictures from multiple folders at once.
Pictures are in multiple folders in smart phones, should be able to select multiple folders to sync at the same time, not just one folder like with cameras.
Sync newly downloaded music from specific folders like "amazon purchases" or what ever MP3 service is used so i dont have to hunt down my new music and move it over to my computer.
All this should be done with the handheld device sync option. ALL my media in MULTIPLE folders that the user selects should sync with ONE button press. this is what is missing from the entire industry, and MC is one of the few companies that can make this work.
-
I'd like to be able to perform more server tasks on a mc client.
- Explorer like: Most important for me would be to change file locations on server and delete files.
- Setup theater view or webremote: Define theater view from client.
I know, there are remote tools - but anyway it would be a great improvement to allow doing it from client!
-
I'd like to be able to perform more server tasks on a mc client.
- Explorer like: Most important for me would be to change file locations on server and delete files.
- Setup theater view or webremote: Define theater view from client.
I know, there are remote tools - but anyway it would be a great improvement to allow doing it from client!
+1; Opened a thread related to this: http://yabb.jriver.com/interact/index.php?topic=67229.0 (http://yabb.jriver.com/interact/index.php?topic=67229.0) ;D
-
I'd really like the ability to turn on the Last.fm radio from Gizmo and route it to a zone.
In general, anything you can do to make streaming audio work from inside MC (and Gizmo) and use MC's zones would be huge for me. Spotify/Grooveshark/Rdio control would be awesome (doesn't have to be the free versions, I'll happily settle for the premium service if it allowed zone control).
I'd also love to be able to feed MC a real-time analog signal and have MC behave like a pre-amp, i.e. I'd like to plug my turntable in my computer and spin records (not just archive recordings).
Thx!
-
QAM channels....
-
I would like a "Playlist" entry in the theater view File Info Panel setup. When a playlist is selected in theater view, any notes associated with that playlist should then be visible on the right.
-marko
-
To be able to refresh smartplaylists in Theater View.
-
I think we're up to MC23 already!
Two further things I've mentioned before:
1. DLNA Server: The ability to set an option on individual levels to skip that level and automatically drill-down if it only returns a single item. Maybe also an additional related checkbox to only automatically drill-down if the single item is blank, not if it has a value.
2. DLNA Server: On each level, add an option to remove the All Items entry.
I'm most concerned about DLNA Server but I guess these things might also be useful in Theater View.
The argument has been made before that some people find the All Items useful and not everyone would want to skip single items (indeed, there are some types of menu levels where I would find them useful), however the point is that having the option means that you can choose and it makes browsing of your media collection much more fluid and intuitive and a pleasure, which after all is what this is all about.
-
Add support for the context menu when open a website inside MC and Chromium engine is used. Is frustrating not being able to do basic things.
-
I think this is mentioned, but I request a real subtitle support... It must include support at least .srt, .sub, PGS and vobsub subtitles. Configurable font and size+placement is must. Now I must use ffdshow to get subtitles shown like I want them to show (like mpc-hc, potplayer, not like powerdvd!). If you could do subtitle renderer better, I can use madVR to do decoding and dumb ffdshow...
-
For the most part, Media Center does way more than I could possibly learn - many things I'd like to understand better, but the resources are lacking and/or missing. There are a couple of key areas I think MC should focus on:
1. Overhaul of the Theater View section. To me this is the core interactive area of the entire application when its used as the central all media play/record/view/watch in a home theater set up.
The standard view is more of the administration section, but I end up just using it for playback of audio when I'm sitting in front of the computer which is not in the same room with the HTPC/stereo/PC where I like to listen to music or watch video/TV.
Currently, it really cannot substitute as a "Media Center" application like Windows MC, with complete control of all media playback/view/record/watch with a MC remote control.
2. Change the client/server structure so a library/library server can operate on a home server or similar. The concept of connecting to various libraries works fine so long as those PCs are on, but it seems like an excessively cumbersome solution - all my media is on a home server, so the library on my home office workstation is pointing to the WHS and I need to connect to this workstation from the HTPC to get the library content to the media room. This is NOT designed with users in mind who want the MC features but don't want to spend a lot of time 'figuring it all out'.
Kevin
-
Currently, it really cannot substitute as a "Media Center" application like Windows MC, with complete control of all media playback/view/record/watch with a MC remote control.
Are you using MC17 for this? Please start a thread on what you think is missing.
-
I think this is mentioned, but I request a real subtitle support... It must include support at least .srt, .sub, PGS and vobsub subtitles. Configurable font and size+placement is must. Now I must use ffdshow to get subtitles shown like I want them to show (like mpc-hc, potplayer, not like powerdvd!). If you could do subtitle renderer better, I can use madVR to do decoding and dumb ffdshow...
MC17 has a very good subtitle renderer, which seems to offer more than any other subtitle renderer I've experienced. You should try it, I think it already does everything you just asked for.
-
MC17 has a very good subtitle renderer, which seems to offer more than any other subtitle renderer I've experienced. You should try it, I think it already does everything you just asked for.
I hate the font and it doesn´t show my subs :( When rightclicking video and navigating to subtitles, I can see my .srt file, but when clicking it it doesn´t show:( And it is not selected when checking again...
But the main functions that are necessary to subtitle renderer are not here.... Font is terrible (I use alte haas grotesk) and thay are not bold and position is a little off...
-
I'm sure that if you provide specifics and perhaps a sample of the offending file(s), Matt would be willing/able to fix these issues. He just did some work on subtitles related to font size and position, so it may already be able to do what you want, but if not, specifics might just get it working to your needs.
Maybe you need to change the name of the subtitles for this to work?
16.0.132 (7/18/2011)
1. NEW: Added native support for embedded VOB subs.
2. NEW: Added support for any number of external SRT subtitle files (naming must be [Name]*.srt where * is an identifier (or empty); if .srt files are in a subfolder the folder name must be 'Sub', 'Subs', 'Subtitle' or 'Subtitles').
-
I'm sure that if you provide specifics and perhaps a sample of the offending file(s), Matt would be willing/able to fix these issues. He just did some work on subtitles related to font size and position, so it may already be able to do what you want, but if not, specifics might just get it working to your needs.
Maybe you need to change the name of the subtitles for this to work?
16.0.132 (7/18/2011)
1. NEW: Added native support for embedded VOB subs.
2. NEW: Added support for any number of external SRT subtitle files (naming must be [Name]*.srt where * is an identifier (or empty); if .srt files are in a subfolder the folder name must be 'Sub', 'Subs', 'Subtitle' or 'Subtitles').
You got me wrong :) I was complaining about the ugly font which cannot be changed... It seems to be too low quality compared to basic fonts in media players (arial etc.). It may be better if you can implement "bold"-option, so it looks more nicer on a big screen ;)
I didn´t do that subtitle folder, but it showed couple subs that I tried, but since I switched to ffdshow subtitle renderer, it somehow fails to load them??? Anyway, I am not using it before the font is better and bolder...
-
Is this what you don't like?
http://files.jriver.com/images/subtitles_jriver.png
-
You got me wrong :) I was complaining about the ugly font which cannot be changed... It seems to be too low quality compared to basic fonts in media players (arial etc.). It may be better if you can implement "bold"-option, so it looks more nicer on a big screen ;)
For text-based subtitles, the font is the same as used for other text in the program. It can be configured in Options > Tree & View > Font.
Subtitle size can be configured globally in Options > Video > Subtitles or per file while playing.
-
For text-based subtitles, the font is the same as used for other text in the program. It can be configured in Options > Tree & View > Font.
Subtitle size can be configured globally in Options > Video > Subtitles or per file while playing.
Oh, I feel really stupid now :-[ So, I request then additional option to the subtitles section, which includes fonts ;D
EDIT: I get still very low quality subs (not anywhere as it shows couple post above). I tested using .srt file and Verdana. For comparison I take one ffdshow alte haas grotesk picture too...
(http://i0.simplest-image-hosting.net/thumbnail/verdana20mc17.png) (http://simplest-image-hosting.net/png-0-verdana20mc17)
(http://i0.simplest-image-hosting.net/thumbnail/ffdshow20alte20haas20grotesk20mc17.png) (http://simplest-image-hosting.net/png-0-ffdshow20alte20haas20grotesk20mc17)
Verdana is the ugly one :) I checked "bold" option, but it shows still the same??? What I am doing wrong again?
-
The difference is caused by the choice of antialias, border, and shadow settings. These are not configurable in MC when the new internal subtile engine is in use. I agree that the quality and legibility are not optimal. I prefer the settings that FFDShow uses by default (those defaults were not chosen by chance).
I once posted a similar comparison on the closed beta board. Here are two cropped (but not scaled) versions of the images:
An external subtitle engine (either FFDShow or VSFilter, I am not sure which one anymore) with ROHQ on MC v.16.0.128:
(http://i224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/MC160128_ROHQ_cropped.jpg)
The new internal subtitle engine (the subtitle size setting is 140% to make it approximately the same size as above and readable from distance), ROHQ, MC v.16.0.168:
(http://i224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/MC160168_ROHQ_140_cropped.jpg)
The original 1920 x 1080 screenshots (click to enlarge):
External:
(http://i224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/th_MC160128_ROHQ_external_subtitle_engine.jpg) (http://s224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/MC160128_ROHQ_external_subtitle_engine.jpg)
Internal, size 140%:
(http://i224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/th_MC160168_ROHQ_new_internal_subtitle_engine_140.jpg) (http://s224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/MC160168_ROHQ_new_internal_subtitle_engine_140.jpg)
Internal, size 100%:
(http://i224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/th_MC160168_ROHQ_new_internal_subtitle_engine_100.jpg) (http://s224.photobucket.com/albums/dd212/AB2K/MC/Subtitle%20comparison/MC160168_ROHQ_new_internal_subtitle_engine_100.jpg)
-
Oh, I feel really stupid now :-[
No problem. I guess I was just trying to point out that specific requests for improvements are more likely to get you what you want than a general "it's not very good now, I'll use something else" comment.
The beginning of a new version is the best time to get your wish list considered. If you need/want to provide more specifics about improvements you'd like to see, I bet you see some development geared towards them before V18 comes along next year.
-
A coming build of v17 will support a user configurable subtitle font for text-based subtitles. I also tuned the default font and bordering a bit. Feedback welcome once the build is available.
-
Anyone who is interested in this issue, could you please download the 1920x1080 screenshots and try them (e.g. in MC's full screen display view on a HD television screen). Which one do you prefer?
[ I was about to post this a couple of hours ago (i.e. before Matt's reply), but the forum went off-line. ]
-
Which one do you prefer?
I prefer the top, external ones. I think I would like them more without the drop shadow. Like the oversized 140% style, but the external bolder font. I'd have to see it, but I think I'd prefer that. FWIW
-
A coming build of v17 will support a user configurable subtitle font for text-based subtitles. I also tuned the default font and bordering a bit. Feedback welcome once the build is available.
That's Excellent Matt!
-
Some features I'd like to see:
Calculate dynamic range for tracks and albums as part of the standard audio analysis. There's been work by the Pleasurize Music Foundation (http://www.dynamicrange.de/en/links) to come up with a standard calculation for dynamic range. Would be nice to have MC follow along with that if possible.
More options for resampling settings. This was mentioned in the MC16 forum. Would be neat to be able to do something like if statements to determine the resampling rate. If 44.1 or 176.4 then resample to 88.2. If 48 or 196 then resample to 96. But only if it can be done without making the UI or MC too complicated.
Color management. I scan and edit cover images and am a bit fussy about image quality. I embed an sRGB color profile when I edit an image. That way the image will get color corrected and look correct on different computers (but only in apps that do color management). All that careful work I do to get the color just right gets lost when I view the covers in MC. :( I know it is easier said than done. Neither Chrome nor IE do color management. Microsoft does not have color management religion when designing their APIs. If it can be done in MC it would be nice and I'd be very happy.
-
I'd love to see Rhinobanga's Playing Now plugin get integrated into MC17.
-
I'd love to see Rhinobanga's Playing Now plugin get integrated into MC17.
+1. It's great with Music Videos, you can play as if you had your own TV Channel 8).
-
Anyone who is interested in this issue, could you please download the 1920x1080 screenshots and try them (e.g. in MC's full screen display view on a HD television screen). Which one do you prefer?
[ I was about to post this a couple of hours ago (i.e. before Matt's reply), but the forum went off-line. ]
I also prefer the external one. It is more readable for me and almost like the one I was using with ffdshow raw). Thanks Matt for looking into this! Waitng for the tuned subs...
Then if only DVB subtitles (or at least teletext subs) and recording multiple channels from the same frequency (it's a big deal for DVB-T/C/S users) were supported. Maybe after that I could convince myself to ditch DVBViewer.
-
I would like a native basic TrackInfo designer for those HTML dummies like me, with some background and collocation templates and a configuration tool for choosing what fields to show.
-
Didn't see this mentioned -- I would like to see full support for MC as a client. Perfect for those who use MC on their server, so they don't have to log-in to run MC.
I am running it as a client via a workaround, but it means I have to shut-down the service when I log-on to my PC, then shut down the service, and finally run MC.
Paul
-
The radio interface of MJ is very poor.
Therefore, I would also have a wish for MJ 17:
A better interface not only for TV and everything else, but also for radio listeners. At the moment, only in the mini-view, it is possible to get information about the song and the artist. Why is it not possible to display the information in the Track Info window? Doing this would also result in a theater view a better image
-
I'd find it really useful if you could take say 6 or so snap shots of a video and have them displayed as a preview when you hover the cursor over that video or whatever. I have a lot of video clips where the thumbnail alone isn't really sufficient for me to know what the video is about. If there was a snapshot of the video at 6 incremental points then i'd easily be able to tell what happens in the video without having to load it.
-
You guys are the best
Send my regards to Matt!
Cheers
Thomas
-
The ability to hide/turn off/disbale play doctor. I'd upgrade instantly!
I second that
-
I want a toolbar button to toggle tooltips on and off, please...
-
I'd really like to have a single command to show/hide the default subtitles as per user settings instead of having to use the arrows multiple times. I mostly use MC with a remote and a one click command would be awesome.
-
I would like -
Be able to queue youtube videos. I use youtube like a video jukebox, queuing videos in separate windows and dropping onto a second monitor.
I like using the native web version of youtube within media center but its a pain that you cant add youtube videos into the playing now playlist.
If there is a way of doing this already please let me know! ( I realised that you can download and then queue videos but that's not very user friendly)
Thanks heaps!
-
Hi,
Somewhere a couple of months back I was sure I saw a thread that had what was planned for MC17 this year. I can't seem to find that thread now, has it been moved/removed?
One item I remember seeing on that list was an iPhone/iPad version of Gizmo.
Is it still planned to create this in the coming year? I am trying to decide whether to wait for the iPad version to be released or go out and buy a galaxy tablet.
I also remember seeing the ability to stream Live TV from the server to a remote like Gizmo.
My main reason for enquiring is to determine the best option for ultimately being able to stream Live TV (& music of course) from MC Server to a mobile Tablet around the house.
The other main feature I require is to control playback in various zones with the abilty to link/unlink them from the tablet.
-
The ability to click on the icon next to a directory tree, and have it add the media tracks in the directory to the Now Playing playlist - as if loading an album
Winamp has this functionality if you would like to see how it works - but I think it is very handy.
(http://s14.postimage.org/v2bf7pm75/mc17.jpg)
-
The ability to click on the icon next to a directory tree, and have it add the media tracks in the directory to the Now Playing playlist - as if loading an album
Shell integration is already available—if enabled in Options > General. A set of MC commands (including Add to Playing Now) are added to all Explorer file and folder context menus.
-
Hi Rick,
Thanks for your response
I can see the current shell integration, and it works when I select all tracks and follow the right click tree and add to Now Playing.
Also it works by adding ALL files to Now Playing (including txt/jpgs etc.) when I click on the icon next to the directory tree, and select Copy or Move
However, I was suggesting a change to the way this works - by either
- Having an option to customize the shell integration to reduce the steps needed, or even the number of options (similar to WinRAR)
- Only add audio files to Now Playing when selecting the icon in next to the directory tree
Hope this helps
-
The inclusion of a compressor or wavehammer-like plugin of the DSP Studio. GComp works about 70% satisfactorily. I live in an MDU and it's necessary because perceived volume cannot jump, end of, else I get complaints from the neighbours, whatever the gain is. The technical document in the wiki states specifically that the process within MC uses peak level, but peak level is not an indicator of loudness. Root mean square (i.e. basically the mean of the difference between the peaks and valleys in the waveform) is, so I find it fundamentally inadequate.
Ex, a typical minimal dance track ripped from vinyl you can have peak at or near 0, but its RMS is going to be around -18db to -15db as opposed to a radio show, compressed during broadcast, also, peaking at 0, that will have it around -10db or even higher. They would be at the same peak, but the difference in RMS is going to make the radio show seem much louder. -10db I find to be the practical "listenable" loudness, but some loudness war era things have it much higher (i.e. there's spots on that "Iggy Mix" of Iggy Pop's Raw Power that reach -4db).
I want the operation to occur on the fly as part of the output chain, rather than changing the files themselves. Sony's Wavehammer used to work well for this but the gui broke around MC15.
-
Some features I'd like to see:
Calculate dynamic range for tracks and albums as part of the standard audio analysis. There's been work by the Pleasurize Music Foundation (http://www.dynamicrange.de/en/links) to come up with a standard calculation for dynamic range. Would be nice to have MC follow along with that if possible.
+1
I currently do this manually using their standalone tool and then add the results to MC.
-
Global variables.
http://yabb.jriver.com/interact/index.php?topic=62019.0
-
The ability of one playlist to expand the results of another.
Example:
Random result of smartlist one contains just two entries (track details are irrelevant)
Artist = Pink Floyd
Artist = Genesis
Now I'd like to be able to generate a second smartlist from this that shows ONLY tracks by artists found in the results of smartlist 1, eg Pink Floyd and Genesis
Currently there is no way to do this.
Of course, smartlist one could contain any number of entries - the point is that it can then be used to limit the results
The syntax might borrow from the current ~limit, eg
~playlistlimit=-1,1,[playlist],[fields]
Which specifies the limiting fields from which playlist and min, max values to use, eg:
~playlistlimit=-1,-1,[playlistid=firstplaylist],[artist] ~nodup=[Name]
Would generate a result set containing every unique named track by the artists found in the first playlist
Perhaps this syntax is actually confusing and there is a better way, but the idea remains - allow the results of one playlist to be expanded in another but limited to only the fields found in the first playlist.
-
Add a notes field to the Manage Library subsystem. I have so many user keywords that I find it difficult to keep track of what they are for. Notes would massively help.
-
Relational Data on custom fields...
-
Auto-Tagging when Right-Click importing via Windows Explorer
-
ETA's for ALL operations, especially those that interrupt playback.
-
In and Out Cue-Point Button to set them interactive instead of putting the number into playrange tag field, Chapter cue points with naming function would be nice also.
-
Very small, probably very easy add would help me greatly- Eject and Load commands in the remote control interface. I would like to use the IRMAN plugin, but because MC does not provide an eject/load function, I have to load Girder 3 just for that function. This prevents MC from using the IRMAN plugin. Sure, I can program Girder to use keyboard shortcuts to control MC, but the addition of the two commands to MC would eliminate a piece of now-obsolete software and allow direct IRMAN control. My HTPC was custom built, and has no external eject button. Thanks for your consideration.
-
The ability to create custom jump links (ie like those seen next to Artist and Album and Genre)...
It should allow us to create a jump link to a specified playlist/view/smartlist/search result. Jump list expression should allow normal smartlist syntax so we can create any custom link.
-
Allow us to specify which view MC jumps to after import instead of using the limited 'Recently Imported' playlist.
I use a workflow of 8 smartlists after import to do data tagging/corrections etc and it would be great if I could tell MC to jump directly to the first smartlist of my workflow.
-
I'd really like the ability to turn on the Last.fm radio from Gizmo and route it to a zone.
+1 on this, would love to be able to stream internet radio (Connected Media) to zones either through Gizmo or ideally exposed via WSDL so I can incorporate into my own UI.
-
I would love to be able to sync my android over wireless with MC17. Maybe just a small server app that runs on the android that MC connects to as a device.
Also still waiting on volume leveling during sync as well. Since no player I can find on android supports replaygain at the moment, which I can't understand.
+1 - wireless sync would be terrific.