INTERACT FORUM

Devices => Sound Cards, DAC's, Receivers, Speakers, and Headphones => Topic started by: SHAY820 on November 21, 2017, 04:59:42 am

Title: TOPPING D30 DSD DAC
Post by: SHAY820 on November 21, 2017, 04:59:42 am

hi all
i have windows 10 pc connected via usb to topping d30 dac
playing music via jriver .
what shoud i chose for playing dsd ? asio or wasapi ?
thanks shay

Title: Re: TOPPING D30 DSD DAC
Post by: Awesome Donkey on November 21, 2017, 05:08:41 am

Either *should* be okay, but make sure you enable DSD bitstreaming to get it working.

Title: Re: TOPPING D30 DSD DAC
Post by: SHAY820 on November 21, 2017, 05:13:32 am

thanks very much
in bits dept stay on default (automatic) or chose 24 bit or 24 bit integer in32 bit
thanks again shay (sorry for my english )

Title: Re: TOPPING D30 DSD DAC
Post by: Awesome Donkey on November 21, 2017, 05:52:38 am

I'd keep it on automatic, not that it really matters when bitstreaming DSD anyways.

But, I'd check the last box in the WASAPI settings, Play a little silence on DoP stop (removes click with some DACs). This is assuming, of course, your DSD DAC supports DoP - if it only supports native DSD you'll probably have to use ASIO instead.

Title: Re: TOPPING D30 DSD DAC
Post by: SHAY820 on November 21, 2017, 06:28:34 am

Quote from: Awesome Donkey on November 21, 2017, 05:52:38 am

I'd keep it on automatic, not that it really matters when bitstreaming DSD anyways.

But, I'd check the last box in the WASAPI settings, Play a little silence on DoP stop (removes click with some DACs). This is assuming, of course, your DSD DAC supports DoP - if it only supports native DSD you'll probably have to use ASIO instead.

"USB support DSD64/DSD128(DoP or ASIO Native)." this is what you mean ?

Title: Re: TOPPING D30 DSD DAC
Post by: Awesome Donkey on November 21, 2017, 07:44:21 am

Yes, it supports both.

Title: Re: TOPPING D30 DSD DAC
Post by: gridslayer on December 18, 2017, 04:50:27 pm

OK, I upgraded to version 23.  I just got the Topping D30.  When I select "DSD bitstream in Dop format" most files begin to stagger, with some clicking.  When I uncheck it, it goes away.  Driver is installed for the Topping.

Here are my JRiver settings:

Audio Device:  XMOS USB AUDIO 2.0ST 3066 (ASIO)
No memory playback
DSP & Output Format:  (Either "None" or "DSD bitstream in Dop format") (The latter causes the problem)
Bitstreaming Yes (DSD)
Prebuffering 6 seconds
Play silence at startup for hardware synchronization: none


Windows 10 settings:
Volume 100%
Disabled all enhancements
Where it says select sample rate and bit depth to be used when running in shared mode (what''s that?) I selected 24 bit 192000HZ (studio quality).  Does that even matter?
Both Exclusive modes boxes are checked.

Any advice is appreciated...