INTERACT FORUM

More => Old Versions => JRiver Media Center 22 for Windows => Topic started by: ppataki on March 05, 2017, 06:45:24 am

Title: Room Correction - Distance setting
Post by: ppataki on March 05, 2017, 06:45:24 am

Can I set the Room Correction Distance resolution from 0.1 meter to 0.01 meter?
Thank you

Title: Re: Room Correction - Distance setting
Post by: Manfred on March 05, 2017, 10:02:17 am

I would not recommend it.

Room correction is much more complex then simple setiing the distance parameter.

You can read mwillems excellent Guide to speaker and room correction:

http://yabb.jriver.com/interact/index.php/topic,87538.0.html

I have done only the speaker corrections part leading to excellent results for my B&W 804S.

Title: Re: Room Correction - Distance setting
Post by: mojave on March 08, 2017, 10:34:56 am

Quote from: ppataki on March 05, 2017, 06:45:24 am

Can I set the Room Correction Distance resolution from 0.1 meter to 0.01 meter?
Thank you

I agree that the Room Correction - Distance setting could use higher precision. A Yamaha receiver, for example, has 0.05 m or 0.2 Ft increments. I didn't realize in JRiver that Metric had higher precision than the English measurement system. 0.1 m is 3.9" and with the English measurement system it has 6" increments.

If you need more resolution, you can use Parametric Equalizer and Delay. This allows for delays as low as .01 milliseconds.

Title: Re: Room Correction - Distance setting
Post by: Matt on March 08, 2017, 11:00:50 am

Coming next build:
Changed: Made the resolution of the room correction speaker distances smaller (0.1 ft or 0.01 meters).

It was a little trickier than I expected, but oh well!

Title: Re: Room Correction - Distance setting
Post by: ppataki on March 08, 2017, 02:46:19 pm

Thank you, much appreciated!!

Title: Re: Room Correction - Distance setting
Post by: CompEx on March 09, 2017, 08:55:38 am

Much appreciated, too! :)


Kind Regards

CompEx