INTERACT FORUM
More => Old Versions => JRiver Media Center 29 for Windows => Topic started by: ndgame on August 03, 2022, 01:32:53 pm
-
So my question is this.
When JRiver is setup and I enable Red October with MadVR for tone mapping what is the hardware settings for the video card? Do I go to display options in Windows and click "Use HDR" or leave that alone? This is why I ask. When I don't and I start a movie using my JVC 4K HDR Projector it is keeping the JVC setting on Natural and not changing it to the HDR feature on the projector. So not sure how the JRiver communicates to the Projector to let the projector know if this is a HDR source or not.
Also what is the process for allowing audio passthrough out of the HTPC box so that my Arcam AVR20 can do all the sound decoding for me? Alot of my movies are all 4K with Atmos and TruaHD or DTS. I want that to be passed through to the arcam.
Thanks,
AH
-
For HDR, please read this:
https://wiki.jriver.com/index.php/JRVR_-_JRiver_Video_Renderer/Configuration
-
Thanks Jim for the response.
Upon looking at that link it doesn't cover the MadVR settings for HDR. I am not using JRVR so that link doesn't help me much.
I've attached a couple of screenshots and what I can't find out is if I pass through HDR does that mean that MadVR isn't doing the tone mapping? The other question I have is the link you provided (if I did switch to JRVR) is referring to a Dell monitor. How does this change if My HTPC with JRiver on it is connected to a Receiver that I let do the HDMI switching to a Projector?
Also in my original question I also asked about audio passthrough so that the Arcam knows what to change the mode to.
-
Audio is easy. You need to set it to Bitstream. It is under the Audio options.
-
Thanks for the response. I tried that and I got no sound. Under Audio when I go to select bitstream it says (Not recommended) but I select Yes anyways and the sound goes away.
-
That is weird. You are using HDMI right?
-
I have attached the screenshot. I am using HDMI and I did switch to JRVR for testing and I went to audio and selected bitstreaming Yes HDMI.
I actually thought the problem was something I did on the machine with changing a bunch of settings and stuff. So about 20 mins ago I finished fully formatting the ssd drive and reinstalling a clean version of windows.
Just finished a JRiver install again and went through all the settings and that screenshot is from the new build.
-
Make sure you installed your video card drivers properly, then go into the Control Panel->Sound panel and select the correct playback device.
For example, if using an nVidia card, you would want to select one of the NVIDIA High Definition Audio Devices, likely showing another device it is connected to - on my rig, this is "marantz-AVR" but for you I would assume it says something like "Arcam-AVR20" or similar. From there you can then click "Configure" to configure the settings, e.g. # of speakers, speaker size, etc.
You can also select "Properties" to see what your audio device supports. It's possible you don't support whatever sound format you are attempting to bitstream.
-
Thanks for responding. I did try everything you mentioned and even when I go to properties to see formats I am seeing almost all the formats there. But for some reason I getting the same error over and over.
I went into the market place and download DTS plugin and the Dolby access but still no luck with that.
I have the DSP disabled in JRiver as default because I wanted my ARcam to do all the decoding. Does that sound correct to you?
-
Can you post pic of your DSP & Output format window? Specifically the "output format" pane?
I assume in the Windows sound control panel you've also tested the output (Windows should play a tone through each speaker it believes is there).
-
Thanks for responding. I did try everything you mentioned and even when I go to properties to see formats I am seeing almost all the formats there. But for some reason I getting the same error over and over.
I went into the market place and download DTS plugin and the Dolby access but still no luck with that.
I have the DSP disabled in JRiver as default because I wanted my ARcam to do all the decoding. Does that sound correct to you?
I had often this problem. For me the trick was to choose my Denon amp as output, set it to indeed to bitstream, and not let JRiver do anything, disable the output.
With my older computer not manage anything