INTERACT FORUM
Mac => JRiver Media Center 33 for Mac => Topic started by: harry871 on October 30, 2024, 07:48:11 am
-
Hello,
I have a Mac Mini M2
1. Every time I open MC 33-030 the page disapears after 4 seconds. All my music files are on an external drive. Everything work with MC32 See partial attachment of the report.
I installed the same version of MC33-030 on my old Mac-Book Air 2018 with intel processor-works perfectly
2. I have a new email: h****n@gmail.com but I'm not able to modify it in my account.
When I put my current password, I get an error messsage in red: there is already another user with the same name
Please help
regards
Harry
-
Hello,
I have a Mac Mini M2
1. Every time I open MC 33-030 the page disapears after 4 seconds. All my music files are on an external drive. Everything work with MC32 See partial attachment of the report.
I installed the same version of MC33-030 on my old Mac-Book Air 2018 with intel processor-works perfectly
2. I have a new email: harryaslanian@gmail.com but I'm not able to modify it in my account.
When I put my current password, I get an error messsage in red: there is already another user with the same name
Please help
regards
Harry
We need the entire crash report with backtrace.
When it happens in MacOS you should get a crash report dialog. You can do "report" then copy/past from the report into textedit. Save that out and attach it here.
Thanks.
-
Hi,
thank you for your reply.
Please find attached a full report Nov2, 2024
Regards
Harry
-
Hello,
2. I have a new email: h****n@gmail.com but I'm not able to modify it in my account.
When I put my current password, I get an error messsage in red: there is already another user with the same name
You had already created another account with the email. I deleted that and set this account to the new email address.
-
Hi,
thank you for your reply.
Please find attached a full report Nov2, 2024
Regards
Harry
In System Settings->Privacy and Security
MediaCenter33 must be allowed network access as well as files and folders.
-
You had already created another account with the email. I deleted that and set this account to the new email address.
thank you Bob
-
Hi Bob
I attached attached the requested screen shots.
I had given all thes accesses at the very begining(before ask your help) but doesnt work.
Maybe I should change some other setting, please advice
Regards
Harry
-
If you haven't added anything to the MC33 library, you could delete it's user data folder and re-run MC33.
It will then start with new settings and copy over your MC32 library again (you'll need to re-enter the MC33 license).
If you do this, do NOT INTERRUPT it upon first start. It can take some time to move and update the library especially if it's large.
To do so, remove the folder under your user account:
Library/Application Support/J River/Media Center 33
You can get at this folder (hidden by default) by any of the methods detailed here:
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-Access-Hidden-User-Library-folder-on-Mac-OS.html
-
Hi Bob ,
I followed your instructions, they are very clear BTW.
1. I opened the hiden folder in MC33 using the link autodesk.
2. I deleted the Library folder. In the attached screen shot the Library folder is not deleted since I reinstalled the MC 33 in order to show you what folder I deleted. Thus the MC33 doesnt work even without the library folder . Should I delete something else, I'm not seeing the User Data folder that you mentioned. What could I do from my own, or maybe I should wait for another update.
3. I restarted the MC33 but the problem persist
please tell me what to do if u see some solution.
Thank you
Harry
-
Hi Bob
I don't see any user data folder under the MC33 library. You said:(If you haven't added anything to the MC33 library, you could delete it's user data folder and re-run MC33.
It will then start with new settings and copy over your MC32 library again (you'll need to re-enter the MC33 license).)
I'm attaching a screenshot after I have unhided all folders.
Harry
-
Hi Bob
I don't see any user data folder under the MC33 library. You said:(If you haven't added anything to the MC33 library, you could delete it's user data folder and re-run MC33.
It will then start with new settings and copy over your MC32 library again (you'll need to re-enter the MC33 license).)
I'm attaching a screenshot after I have unhided all folders.
Harry
You need to delete the Media Center 33 folder which will delete everything under it. It's not just the library, it's the settings, data, etc.
To do so, remove the folder under your user account:
Library/Application Support/J River/Media Center 33
-
I did that now but is the same problem
-
I did that now but is the same problem
Ok thanks for trying that.
Is this a standalone MC or a client of a library server?
-
standalone
-
MC33 works perfectly with my MacBook Air-intel processor, MC32 work on my macmini M2 but MC33 doesnt work on macmini
-
MC33 works perfectly with my MacBook Air-intel processor, MC32 work on my macmini M2 but MC33 doesnt work on macmini
Sent you a PM (personal message)
-
where I could see your personel message
-
harry scroll up to the top of the interact forum page and click on the My Messages button
-
I've also had trouble running 33 on Sierra. I had previously posted about my problems but can't find that post, so I apologize for the duplication. I Probably posted in the wrong place. Sorry. I'm afraid I don't understand the Media Center well enough to be helped, but I'll give it one more try.
I am trying to run MC 33 on a Macbook M1, and just get beach balls. I done all the OS stuff, including reinstalling sierra 5.1. I suspect the problem might be network access. I have never noticed MC requesting network access, but guess it did and I missed the boat because MC is not listed as an OS setting option in all access.
A little more background on my experience with MC. I've run it for years with few problems until now. I am currently running MC 33 on an intel Mac mini as a library server running Mac Senoma 14.7. That's still working OK. Before I (accidentally) upgraded my MacBook to 15.1, I was running MC 29 and using it to access the server. Now I can't get MC 33 to run on my MacBook. My MacBook is set to allow software from any source to run, so that's not the problem. MC also has full disk access permissions. Network access is the only permission not allowed, asfak. Sorry if I am not doing everything right on the forum. Hope for some tolerance and patience. I would appreciate any help or suggestions. Thank you.
-
It does need network access.
-
It does need network access.
How to I give it network access if it doesn't ask?
-
WhenI look at PRIVACY AND SECURITY > LOCAL NETWORK, only see apps that were already installed and had Local Network access before I upgraded to Sequoia 15.1. If Media Center 33 every asked for permission (I don't find Media Center 33 in Notifications settings), I did not notice that request, and I do not know how to add it manually now. Thanks for explaining how to!
-
Did you try a Google search? Or Apple's forum?
-
Yes, I found many posts about other applications broken by this security feature in Sequoia 15.1, but no solutions. Many report intermittent internet connection Sequoia, which is sometimes fixed bu turning off firewall This did not help me. For example, Apple Community post: "From what I can tell, these new OS releases interfere broadly with a number of applications, as well—in my case—my eero router. I can't use Proton VPN or Tailscale without losing connectivity completely." Most posts mention breaking security apps, but others, too. See Developer Forums for attempts to understand these problems.
-
Most are able to run MC 33 on OS Sequoia without problems, so this must be my odd problem. Hope someone can help troubleshoot. Other than Local Network, other security settings are permissive -- I allow MC full file and folder access and every other permission I can find. Don't know why only my Macbook M1 fails to run MC 33. I'd appreciate suggestions. I know MC does not have Local Network permissions, but I haven't been able to fix that If I could, my problems might be over.
What I've tried so far: I reinstalled Sequoia 15.1, and MC 33 and disconnected accessories. My setup had been a little complicated, with a thunderbolt dock connected to an external ssd and an external dell monitor so I simplified. I disconnected everything and restarted the bare Macbook M1. But MC 33 behaved no differently for me -- when I try to run it, I see the spinning Beach Ball for up to 5-10 minutes then application stops responding. Any ideas?
-
I don't know if this helps, but these are the privacy & security settings on my Mac.
System Settings-->Privacy & Security-->
Files and Folders
Accessibility
Input Monitoring
Local Network
Screen & System Audio Recording
-
Yes, that's correct but I think OP's problem is that MC doesn't appear in the Local Network tab and there is no overt way of adding it. I see it in mine but I certainly didn't add it deliberately.
-
Thank you both, Magic_Randy and HaWi, for suggestions. I double-checked Magic_Randy's list and confirmed these settings. HaWi is also correct, MC doesn't appear in the Local Network tab and there is no overt way of adding it, afaik. Also I do not see MC in notifications, and I can't confirm I was notified of any request for local access, which seems to be the core problem. I've done lots of Googling and found no way to solve this with network access, Seems to be a special feature (bug) of Sequoia to prevent users to allow some programs to work. Thanks, Apple. Anyone have suggestions for fixing that?
-
This may not help, but I did a Google search and it replied:
To "force" a request to add an app to the Privacy & Security settings for Local Network on macOS Sequoia 15.1, open the app while connected to your local network, which should prompt a system notification asking for permission to access your local network; then, navigate to System Settings > Privacy & Security > Local Network to explicitly grant access to the app; if no prompt appears, you may need to check the app's settings or contact the developer for further instructions.
Key points:
Trigger the prompt: Launch the app you want to add to Local Network access while connected to your network.
Access settings: If a prompt appears, click "OK" to allow access.
Manual access: If no prompt appears, go to Apple menu > System Settings > Privacy & Security > Local Network and toggle the app to "On".
-
Thanks, appreciate suggestions but these do not work. No notification means it will NOT appear as an option in local network access. Wonder if any terminal command could add it. I've searched but not found anything useful yet.
-
Thanks, appreciate suggestions but these do not work. No notification means it will NOT appear as an option in local network access. Wonder if any terminal command could add it. I've searched but not found anything useful yet.
Maybe Bob can weigh in. He may be aware of how to trigger the prompt. My guess is that Bob's code does not trigger it, it is just handled by the OS, but he would know if the code is involved.
-
I would try to once again remove MC33, both application and complete MC33 folder in user area.
Then install MC32 and see if it works.
Then download MC33 and install it patiently, accepting all prompts .
Good luck.
PS on my first install of MC33 it did not get all the settings from MC32. I had to remove totally MC33 and reinstall it from scratch. With success.
Mac Mini M1, Sequoia latest.
-
I would try to once again remove MC33, both application and complete MC33 folder in user area.
Then install MC32 and see if it works.
Then download MC33 and install it patiently, accepting all prompts .
Good luck.
PS on my first install of MC33 it did not get all the settings from MC32. I had to remove totally MC33 and reinstall it from scratch. With success.
Mac Mini M1, Sequoia latest.
If that doesn't work it may be worth taking the M1 to a Mac Specialist because I'm beginning to wonder if Sequoia for the Mac, like the iOS version, has Corrupted parts of the OS on your pc.
-
Maybe Bob can weigh in. He may be aware of how to trigger the prompt. My guess is that Bob's code does not trigger it, it is just handled by the OS, but he would know if the code is involved.
It looks like I might be able to add something to the plist to trigger it.
I'll make a build for you all to test.
-
It looks like I might be able to add something to the plist to trigger it.
I'll make a build for you all to test.
Give this one a try. I'll add to the history if it works.
https://files.jriver-cdn.com/mediacenter/channels/v33/latest/MediaCenter330039-Universal.dmg
-
Thanks, Bob, but sorry to report the app's behavior is unchanged. I also checked and noticed that MC does not appear among app options in notifications. I saw no notifications when I tried to run your app the first time, saw spinning beach ball until I forced quit, It still is unlisted in local network list of apps.
-
If you never get past the beach ball you won't get to the point of asking for network access.
-
I also installed the MC33-039 but crash in the same was was crashing the MC33_03.
I'm using the zipped version that u sent me the link Bob. Works very well just is not shown in the Finder/application.
I didnt see any icon to drug to the application folder.
Regards
Harry
-
I also installed the MC33-039 but crash in the same was was crashing the MC33_03.
I'm using the zipped version that u sent me the link Bob. Works very well just is not shown in the Finder/application.
I didnt see any icon to drug to the application folder.
Regards
Harry
Example attached:
-
Example attached:
Hi Bob I dont know how I copied the Icon. I think I right clicked some MC33 Icon( for the zipped version) and I got the option:Copy link and I coppied that link to App folder in the Finder.( The dragging has not worked) but now I have the MC33 in my application folder and working.
Thank u for your patience and for all advices
Harry
-
Please try build 40 at the top of this board. Thanks.
-
Hi Bob,
I'll try that build
cheers
Harry
-
Bob
the MC33-040 doesnt work.
Only the debug.zip version work
thanks
Harry
-
I've finally managed to open and run (sort of…) a version, MC 31, that actually has local network access. However it says I don't have a registered license and to DL my licensed version (33), which will not run. I assumed when I paid for an upgrade from 27 to 33 it would include all other later versions (for now). Guess not. Can anyone explain? Thanks.
-
If you have a MC33 license it only works with MC33. It won't work with previous versions of MC. Each version is basically its own self-contained thing.
-
OK. Thanks. I'll need to pay again to upgrade again to an earlier verson just to get it to work MC to work. Will version 30 does work on my machine, even connected to my Library server Having somthing that actually works is worth my that my useless upgrade to 33. Thanks for explaining.
-
Looks like I can't even purchase MC 31?! That seem pretty strange, since it works for me, when 33 does not!?
I already have a license for MC 27, which seems to be working on my M1 Macbook running Mac OS 15.1, for now, although I haven't yet actually listened to anything yet, so can't be sure until I do. Don't know why I every paid for the upgrade to MC 33, which I've never been able to even open on my Macbook. M1, but still might me worth something on my Intel Mac Mini which runs the server.
I might be to old for this ?. Close to giving up on using MC on my Macbook :'(
-
You can't purchase older versions of MC, only the latest version available (which right now is MC33) is able to be purchased.
I would recommend waiting it out and letting Bob work his magic and see if it can be fixed in MC33.
-
pscott,
Could you report this to Apple?
-
Fixed in 33.0.41 at the top of this board.
-
I Installed MC33-041 on my mac-mini M2. This version that works perfectly, at least for now.
Now I have two working versions installed: the debug.zip ( MC33-037 and the last one sent by Bob MC33-041)
thank you Bob
Harry
-
Installed the MC33-041 and working.
Thank you Bob
you were really very helpful.
Regards
Harry
-
Hi Awesome Donkey
I have installed MC32, Mc33 debug and MC33-041 All working. Should I put the first two versions in the trash even I keep them closed .
-
Split a different crash to a new thread.
-
You can't purchase older versions of MC, only the latest version available (which right now is MC33) is able to be purchased.
I would recommend waiting it out and letting Bob work his magic and see if it can be fixed in MC33.
Actually current license always works with the last build of the previous version too but not anything before that.
-
Split to Can't Stream