INTERACT FORUM
More => Old Versions => Media Center 11 (Development Ended) => Topic started by: chilidip on October 31, 2003, 10:32:47 am
-
I have been trying unsuccessfully to get two crdw drives to work completely in on PC. One drive is actually a DVD-RW/CDRW and the other is a DVDROM/CDRW drive. Both made by Sony.
In short, with both drives enabled in device manager, neither will read an audio cd. Disable one and the remaining can read it fine. Both drives read data discs and DVD's without conflict, only audio cd's present a problem.
These drives have moved on the IDE bus to every location except Primary Master with the same results. It doesn't matter if they are on different buses or how configured (master/slave).
Sony support reports this is common, but can't offer suggestions other than make one a primary-slave and the other secondary-master.
I didn't know where else to post and thought someone here might have come accross this problem as well.
Thanks in advance....Randy
-
My info:
Media Center Registered 9.1.291 -- C:\Program Files\J River\Media Center\
Microsoft Windows XP Workstation 5.1 Service Pack 1 (Build 2600)
AMD Athlon 1399 MHz MMX / Memory: Total - 1048 MB, Free - 503 MB
Internet Explorer: 6.0.2800.1106 / ComCtl32.dll: 5.82 (xpsp1.020828-1920) / Shlwapi.dll: 6.00.2800.1226 / Shell32.dll: 6.00.2800.1233 (xpsp2.030604-1804) / wnaspi32.dll: 4.60 (1021) , ASPI for Win32 (95/NT) DLL, Copyright © 1989-1999 Adaptec, Inc. / Aspi32.sys: 4.60 (1021)
Ripping / Drive G: Copy mode:Normal CD Type:Auto Read speed:Max
Drive I: Copy mode:Normal CD Type:Auto Read speed:Max
Digital playback: Yes / Use YADB: Yes / Get cover art: Yes / Calc replay gain: Yes / Copy volume: 32767
Eject after ripping: Yes / Play sound after ripping: No
Burning / Drive G: SONY CD-RW CRX300E Addr: 0:1:0 Speed:48 MaxSpeed:48 BurnProof:Yes
Drive I: SONY DVD RW DRU-500A Addr: 1:1:0 Speed:24 MaxSpeed:24 BurnProof:Yes
Test mode: No / Eject after writing: Yes / Direct decoding: Yes / Write CD-Text: No
Use playback settings: No / Normalization: None
-
Sounds like an XP bug. I have the external version of the Sony DVD drive (DRX-500ULX).
Try this...
1) Shut her down
2) Set your preferred CD drive as master on the channel your HD is NOT on.
3) Disconnect power and comm ribbon to slaved CD drive.
4) Boot (XP should remove all references to that drive)
5) Shut down
6) Set the other one as a slave on the channel the HD IS on.
7) Boot
It may work...and it may not.
10-27
PS: It may have something to do with the IDE's PIO/DMA setting. Check it out here...
http://yabb.jriver.com/interact/index.php?board=2;action=display;threadid=16329;start=msg111224#msg111224
-
Thanks for the response. I tried your suggestion and wasn't able to get it to work.
I'd be most interested to know if anyone has ever gotten 2 cdrw's to work on the same machine and if the h/w made any difference.
Maybe booting off S-ATA discs and having the cdrw's as dual masters would do it.
Randy
-
It will work. I've done it but I'm not sure what the problem is.
I have seen problems that were solved by moving an IDE CD drive to another IDE channel.
Be sure you have master and slave set correctly on the drives and that you have them connected to the right connector on the cable.
Also check Xen's suggestion on PIO/DMA.
-
I currently have an LG CDRW as Secondary Master, and a PIONEER A-106 DVD+-RW as Secondary Slave. I have no problems accessing either of 'em.
It might be worth trying to make sure that they are cabled as if for Cable Select mode. ie. Master is the drive at the end of the IDE cable, Slave is connected to the middle connector.
It might also be worth trying a nice new 80-pin cable. I have had many problems which ended up being caused by dodgy cables.
Hope this helps...