INTERACT FORUM

More => Old Versions => Media Center 11 (Development Ended) => Topic started by: jackpod on March 02, 2006, 06:08:03 am

Title: Eject after rip doesn't work
Post by: jackpod on March 02, 2006, 06:08:03 am

Eject after rip no longer works

Title: Re: Media Center 11.1.135
Post by: JaredH on March 02, 2006, 08:10:27 am

Quote from: jackpod on March 02, 2006, 06:08:03 am

Eject after rip no longer works

Hasn't worked for about 4 builds now.

Title: Re: Eject after rip doesn't work
Post by: JimH on March 02, 2006, 08:14:08 am

Can you provide any more information?  Are you ripping with one drive?  What format are you encoding to?

Title: Re: Eject after rip doesn't work
Post by: jackpod on March 02, 2006, 08:24:05 am

I have 2 drives, it doesn't eject if 1 or both drives are used, it doesn't matter which drive if you are only using one. I am ripping as wav

Title: Re: Eject after rip doesn't work
Post by: David_1cog on March 02, 2006, 08:26:02 am

I'm ripping with just one drive.  No hardware changes since it last worked a few builds ago.

Title: Re: Eject after rip doesn't work
Post by: Krazykanuck on March 02, 2006, 08:43:58 am

I mentioned this in the 133 build.
It found that it doesn't matter if you're ripping or not.
If I put a cd in and wait till MC recognizes it and then use the eject button on the drive MC closes.
If I use the eject option under drives and devices everything is fine.
I tried to turn on logging but when MC starts up again it is as if the log was reset since the only entries are from starting up MC again.
You also may or may not get the MC didn't close properly error box.

Title: Re: Eject after rip doesn't work
Post by: JimH on March 02, 2006, 08:48:59 am

Quote from: Krazykanuck on March 02, 2006, 08:43:58 am

If I put a cd in and wait till MC recognizes it and then use the eject button on the drive MC closes.

I think that's a different problem and it may be a hardware driver problem.

Quote

I tried to turn on logging but when MC starts up again it is as if the log was reset since the only entries are from starting up MC again.

Get the log from Windows Explorer before you run MC again.  It should be here:
C:\Documents and Settings\Jim Hillegass\Application Data\J River\Media Center 11

Post the tail (last 100 lines or so) of it here.

Title: Re: Eject after rip doesn't work
Post by: Matt on March 02, 2006, 09:06:05 am

There's a "Previous Log" link in Help > Configure Debug Logging...

Title: Re: Eject after rip doesn't work
Post by: Krazykanuck on March 02, 2006, 09:11:06 am

OK.

Had trouble finding the Jim Hillegass  :) folder on my system but managed to find it.
Here is the last 100 lines

0025313: CD: CCDInfo::MMCDriveReady: Start
0025313: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025313: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025313: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025313: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025313: CD: CCDInfo::GetVolumeInformation: Start
0025313: CD: CCDInfo::GetVolumeInformation: m_strDrive=J:
0025313: CD: CCDInfo::MMCDriveReady: Start
0025313: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025313: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025313: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025313: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025313: CD: CCDInfo::GetVolumeInformation: Start
0025313: CD: CCDInfo::GetVolumeInformation: m_strDrive=J:
0025313: CD: CCDInfo::MMCDriveReady: Start
0025313: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025313: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025313: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025313: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025313: CD: CCDInfo::GetVolumeInformation: Start
0025313: CD: CCDInfo::GetVolumeInformation: m_strDrive=I:
0025313: CD: CCDInfo::MMCDriveReady: Start
0025313: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025313: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025313: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (15 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=I:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=I:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=H:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=H:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=H:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=G:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=G:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: Start
0025328: CD: CCDInfo::GetVolumeInformation: m_strDrive=G:
0025328: CD: CCDInfo::MMCDriveReady: Start
0025328: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0025328: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0025328: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0025328: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0028844: CD: CMainFrameOtherHelper::HandleMediaChange: Start
0028844: CD: CMainFrameOtherHelper::HandleMediaChange: CD removed from F:\ drive. Updating UI.
0028844: CD: CCDInfo::GetVolumeInformation: Start
0028844: CD: CCDInfo::GetVolumeInformation: m_strDrive=J:
0028844: CD: CCDInfo::MMCDriveReady: Start
0028844: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0028844: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0028844: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0028844: CD: CCDInfo::GetVolumeInformation: Finish (0 ms)
0028844: CD: CCDInfo::GetVolumeInformation: Start
0028844: CD: CCDInfo::GetVolumeInformation: m_strDrive=J:
0028844: CD: CCDInfo::MMCDriveReady: Start
0028844: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=21
0028844: CD: CCDInfo::MMCDriveReady: Finish (0 ms)
0028859: CD: CCDInfo::GetVolumeInformation: returning TRUE because MMCDriveReady returned FALSE, volume ID=0
0028859: CD: CCDInfo::GetVolumeInformation: Finish (15 ms)
0028859: CD: CCDInfo::GetVolumeInformation: Start
0028859: CD: CCDInfo::GetVolumeInformation: m_strDrive=F:
0028859: CD: CCDInfo::MMCDriveReady: Start
0028859: CD: CCDInfo::MMCDriveReady: DeviceIoControl returns err=0
0028859: CD: CCDInfo::MMCDriveReady: Finish (0 ms)


Did't notice the previous log link, thanks.