INTERACT FORUM

Devices => Sound Cards, DAC's, Receivers, Speakers, and Headphones => Topic started by: LeeRoy on January 01, 2012, 12:33:39 pm

Title: Audio channels reversed
Post by: LeeRoy on January 01, 2012, 12:33:39 pm

I am running MC17 but the left and right audio channels are reversed when play audio via MC. Can't seem to find any settings to correct this.
I run a realtek internal sound chip. I have done test tones via the realtek audio software and windows 7 audio device software and the channels play the test tones correctly.
Any ideas or solutions, thanking you. Lee.

Title: Re: Audio channels reversed
Post by: Matt on January 02, 2012, 01:16:18 pm

This isn't a common problem, so is probably driver-specific (or maybe specific to the source file?).  You could try different audio outputs, like WASAPI, ASIO, etc.

Or you can use DSP Studio > Parametric Equalizer > Mix Channels to swap the L and R channels inside Media Center.

Title: Re: Audio channels reversed
Post by: LeeRoy on January 03, 2012, 12:02:29 am

Quote from: Matt on January 02, 2012, 01:16:18 pm

This isn't a common problem, so is probably driver-specific (or maybe specific to the source file?).  You could try different audio outputs, like WASAPI, ASIO, etc.

Or you can use DSP Studio > Parametric Equalizer > Mix Channels to swap the L and R channels inside Media Center.

Thanks for the advice. Tried WASAPI,ASIO then used parametric equaliser setting(ticked to enable) swapped channels but did not change. Also tried multiple audio files but no change. Might just have to live with it . Lee.