INTERACT FORUM
Windows => Television => Topic started by: NickF on November 16, 2012, 05:57:12 pm
-
In the UK, analogue terrestrial transmissions were recently ceased. Shortly afterwards, digital signal strength was significantly increased. I have a high gain aerial with a header amplifier so now my signal strength is far too high and overdriving my tuner cards causing picture break up. I bought a variable attenuator to try to resolve this. I thought I would use the MC signal strength OSD to get the setting right but I find that it either reads 100% or no signal with nothing in between. I am using a BlackGold BGT3600 tuner card. Is this an issue with the card or MC's handling of the information?
Nick.
-
It probably has to do with your specific device. I have signal strength ranging from 50% to 100%, depending on TV stations.
-
Just a thought here , and you may have already tried this ,but I might try bypassing the amp. If yours is a pre-amp /amp setup you need to bypass it all which may require a trip to the sky
Stay Safe