INTERACT FORUM

Windows => Television => Topic started by: mb1 on February 02, 2013, 02:50:15 pm

Title: Setup of Channel scan not working in Hauppauge WINTV HVR950Q(USB)
Post by: mb1 on February 02, 2013, 02:50:15 pm

Executing the scan channel function but scanning stops in seconds. The signal light on HVR glows when scan stars indicating JRiver talking to HVR No error message etc. No channels found from digital or analog scan of unscramled cable signal nor of over the air digital broadcast. HVR works with its own WINTV media application(Uninstalled now.)  Firewall off. Fresh install HVR and JRiver.  Win8, Intel i5 with Intel video.
Any ideas?
thanks

Tuner info from status.
KSCATEGORY_BDA_NETWORK_TUNER filters

    WinTV HVR-950 BDA Tuner
    @device:pnp:\\?\usb#vid_2040&pid_7200&mi_03#7&be89407&1&0003#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{da11afe5-4c27-11dc-beb4-00a0c9f21fc7}
        Input Pin 'Input0'
        Output Pin 'MPEG2 Transport'


KSCATEGORY_BDA_RECEIVER_COMPONENT filters

    WinTV HVR-950 BDA Capture
    @device:pnp:\\?\usb#vid_2040&pid_7200&mi_03#7&be89407&1&0003#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{da11afe4-4c27-11dc-beb4-00a0c9f21fc7}
        Input Pin 'MPEG2 Transport'
        Output Pin 'MPEG2 Transport'


AM_KSCATEGORY_CAPTURE filters

    WinTV HVR-950 Audio
    @device:pnp:\\?\usb#vid_2040&pid_7200&mi_01#7&be89407&1&0001#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
        Output Pin 'Capture'
        Input Pin 'Digital Audio Interface'

    HD Audio Microphone
    @device:pnp:\\?\hdaudio#func_01&ven_10ec&dev_0892&subsys_18498892&rev_1003#4&1eabb83b&0&0001#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\emicinwave
        Output Pin 'Recording Control'
        Input Pin 'Input1'

    WinTV HVR-950 Capture
    @device:pnp:\\?\usb#vid_2040&pid_7200&mi_00#7&be89407&1&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\{da11afe0-4c27-11dc-beb4-00a0c9f21fc7}
        Output Pin 'Capture'
        Input Pin 'Analog Video In'
        Output Pin 'VBI'
        Output Pin 'Audio'
        Input Pin 'Analog Audio In'


KSCATEGORY_ENCODER filters


KSCATEGORY_MULTIPLEXER filters


AM_KSCATEGORY_CROSSBAR filters

    WinTV HVR-950 Xbar
    @device:pnp:\\?\usb#vid_2040&pid_7200&mi_00#7&be89407&1&0000#{a799a801-a46d-11d0-a18c-00a02401dcd4}\{da11afe1-4c27-11dc-beb4-00a0c9f21fc7}
        Input Pin '0: Video Tuner In'
        Input Pin '1: Video Composite In'
        Input Pin '2: Video SVideo In'
        Input Pin '3: Audio Tuner In'
        Input Pin '4: Audio Line In'
        Input Pin '5: Audio Line In'
        Output Pin '0: Video Decoder Out'
        Output Pin '1: Audio Decoder Out'


AM_KSCATEGORY_TVTUNER filters

    WinTV HVR-950 Tuner
    @device:pnp:\\?\usb#vid_2040&pid_7200&mi_00#7&be89407&1&0000#{a799a800-a46d-11d0-a18c-00a02401dcd4}\{da11afe3-4c27-11dc-beb4-00a0c9f21fc7}
        Output Pin 'Analog Video'
        Output Pin 'Analog Audio'


AM_KSCATEGORY_TVAUDIO filters

    WinTV HVR-950 TV Audio
    @device:pnp:\\?\usb#vid_2040&pid_7200&mi_00#7&be89407&1&0000#{a799a802-a46d-11d0-a18c-00a02401dcd4}\{da11afe2-4c27-11dc-beb4-00a0c9f21fc7}
        Input Pin 'TVAudio In'
        Output Pin 'TVAudio Out'


AM_KSCATEGORY_VBICODEC filters


MPEG2 Multiplexer filters

Title: Re: Setup of Channel scan not working in Hauppauge WINTV HVR950Q(USB)
Post by: Yaobing on February 02, 2013, 04:34:26 pm

Which full version of Media Center are you using?

Please capture a log file and send to me.  yaobing at jriver dot com

Title: Re: Setup of Channel scan not working in Hauppauge WINTV HVR950Q(USB)
Post by: Yaobing on February 04, 2013, 11:36:36 am

Thanks for reporting the problem.  There is a bug introduced inadvertently in the last few builds (125 - 128).

The fix will be in an upcoming new build.