INTERACT FORUM
More => Old Versions => JRiver Media Center 18 for Windows => Topic started by: alspoll on March 14, 2013, 02:29:45 pm
-
All,
Matt confirmed it is working for him, which means there is an issue with my system...
I have been using version .106 with this set up with no issues, but once i tried to install a newer version the problem came out.
I have both a MCE ir receiver and a USB-UIRT connected to my computer using a logitech remote.
I used a profile from OPPO in the logitech for the jriver commands so as not to interfere with WMC. I have a button on the remote, that when pressed, takes me into theater view, whether i was in standard view or if MC18 was closed and only the server was running in the background.
I tried 3 separate commands to get this to work: Theater view: Video, Set Mode - Theater view and MC18.exe /MCC 22001,0 with no luck.
I have all device options checked in remote control devices except IRMAN.
I am using Win7 64 bit.
Any ideas or suggestions are welcomed.
TIA,
AL
-
Let's focus on MC18.exe, since that's easy for us both to test.
What state does Media Center need to be in for the command to not work?
Thanks.
-
MC18 is closed and the server is running.
-
It might be worth resetting logging (Help > Logging), closing, running the command line, then grabbing the log.
-
Matt, I created the log. What email should I email it to or should i just post the whole log?
-
You could mail it to logs at jriver dot com.
It might be tomorrow before I get a chance to look at it.
Thanks.
-
Log sent.
Thank you.
-
I don't quite understand that log.
Are you sure it's running MC18.exe? I don't see the launcher in the log.
When I run it here, I see something like this in the log:
0000000: 5036: General: Launcher: Command Line: /mcc 22001,0
Maybe the issue is with finding the launcher or something?
-
i guess that is my point, it is not triggering for me.
here is a partial log where i clicked the same button in standard view. but once i closed mc18 and just have the server running, it does not respond
i was able to use eventghost to trigger the command and it works. so i am able to use the remote as i want at this point.
Media Center; Version: 18.0.149; Types: 2147483647
0000000: 3332: General: Starting logging: Date: 3/15/2013 12:25 AM
0000000: 3332: General: Log Reset: Logging reset
0002309: 3332: General: CMCResourceHelper::GetIsModalPopupShowing: Main window disabled
0003588: 3332: General: CMCResourceHelper::GetIsModalPopupShowing: Main window disabled
0021154: 3332: General: CMCUICore::GetEnableMonitorChange: Start
0021154: 3332: General: CMCUICore::GetEnableMonitorChange: Change: 1; UI Mode: -999; Playing: 0
0021154: 3332: General: CMCUICore::GetEnableMonitorChange: Disabling change for recent UI mode switch
0021154: 3332: General: CMCUICore::GetEnableMonitorChange: Finish (result: 0) (0 ms)
0032261: 4684: General: RCCommandManager::RunCommand: Start
0032261: 4684: General: RCCommandManager::RunCommand: Code: 435B100005F4, Elapsed: 57396, Anti-repeat: 250
0032261: 4684: General: RCCommand::Run: Start
0032261: 4684: General: RCCommand::Run: Finish (0 ms)
0032261: 4684: General: RCCommandManager::RunCommand: Finish (0 ms)
0032261: 1968: General: RunProgram: Start
0032261: 1968: General: RunProgram: Filename: C:\Windows\System32\MC18.exe / Parameters: /MCC 22001,0
0032261: 1968: General: RunProgram: Performing ShellExecute...
0032308: 1968: General: RunProgram: Running process...
0032308: 1968: General: RunProgram: Waiting for completion
0000016: 1196: General: Launcher: Command Line: /MCC 22001,0
0032464: 3332: General: CMCUICore::SetMode: Start
0032464: 3332: General: CMCUICore::SetMode: Setting UI mode: 3