INTERACT FORUM
More => Old Versions => JRiver Media Center 18 for Windows => Topic started by: mher90 on April 24, 2013, 09:31:28 am
-
I'm having a problem similar to this person here:
http://yabb.jriver.com/interact/index.php?topic=78591.0
The problem is that songs will randomly begin to stutter. As the thread describes it, it's like a very rapid set of micro stutters which makes the playback sound like its continuously stuttering. No one has seemed to be able to find a solution.
This occurred on MC17 so I upgraded to MC18 but the problem still persists. I don't remember changing any settings so I'm not sure what caused the problem.
I'm using Win 7, outputting through USB to a Ayre QB-9 using WASAPI event style.
-
No ideas. Have you talked with Ayre?
-
Just wondering, does the ayre have a native ASIO driver to try?
What are the CPU and memory usage with task manager open? Are there heaps of other processes and services running,potential interrupts or hogging cpu?
I have Win 7 (64)/ MC 18.0.171 and use asio driver to usb babyface dac and/or spdif passthrough to a mark levinson reference dac and no stutters (sounds glorious).
I do get video stutter but suspect the lousy Display port/HDMI adapter.
-
I don't think its a problem with Ayre since this identical problem is being reported by people not using the Ayre. Also, this is a problem that just crept up (I've been using MC for years). No unusual CPU/RAM loads on my computer when this occurs.
-
Have you tried changing the size of the buffer?
Tools > Options > Audio > Audio Output > Output mode settings…
EDIT: from reading the Ayre website, there are DIP switches on the back of device that switches it between USB Audio Class 1 & 2.
Are you currently running the DAC in Class 1 or Class 2 mode? (Class 1 should be "driverless")
If you are currently running it in Class 2, I would make sure that you are using the latest drivers: http://www.ayre.com/Download/Streamlength_v126s.zip (http://www.ayre.com/Download/Streamlength_v126s.zip) (more details here (http://www.ayre.com/usb-dac-windows-vista7.htm))
And if that still isn't working correctly, I would try switching it to Class 1.
-
Hardware buffer is set at 100ms. If I try to go higher I can't hear anything through my headphones. I haven't tried lower but I figure lower will make the stuttering worse?
My DAC is running in Class 1 mode already so it doesn't seem to be a driver issue.
-
Try lower.
-
It might not be related to MC, nor your DAC, but perhaps your PC. You could try downloading DPC Latency Checker and seeing how well your PC is handling things.
http://www.thesycon.de/deu/latency_check.shtml
-
My DAC is running in Class 1 mode already so it doesn't seem to be a driver issue.
Why not try the class 2 and an asio driver? .
I have read that USB Audio Class 1 standard supports 24 bits / 96 kHz max when using native mode USB Audio Class 1 drivers and is tied to USB 1 Full Speed = 12 MHz . A USB audio class 2 or a custom driver is needed to run 176/ 192 kHz and higher. USB Audio Class 2 additionally supports 32 bit.
Class 2 uses High Speed (480 MHz). This requires USB 2 or 3.
This might be even more important if different devices sharing the same USB-Hub.If your audio and your graphics card are on the same hub, the bandwidth required by the graphics might cause the audio to stutter.Anti-virus programs polling the internet with high priority might interrupt the audio too.
Some reading here re USB Troubleshooting at http://thewelltemperedcomputer.com/HW/USB_Trouble.htm which in turn references:
USB audio trouble shooting - Lindemann
USB audio dropouts on XP - Computer Audio Asylum
A cheap, fast and effective way to circumvent USB IRQ issues - Computer Audio Asylum
Pops, clicks, crackles, dropouts, or distortion – M-Audio
Crazy problem: USB port provides bad sound, but only at low CPU usage