INTERACT FORUM
Windows => Television => Topic started by: kucherman on October 29, 2013, 03:36:24 pm
-
Hi! Can you help me please, to configure MC. I have a dvb-s card Technotrend TT-budget S-1401 (website http://technotrend.com.ua/technotrend-S1401.htm) and I want to configure it to work in MC. I have successfully scanned channels from one satellite and received channel list and when I turn on any channel I have the inscription - no signal. I use DiseqC switch 4port. How can i fix it?
(http://imageshack.us/a/img17/9852/bv7h.png)
-
I can not test DVB-S here, so it is a bit difficult. One thing I know is that we do not do DiSEqC control. It is my intention to eventually fix that, but I do not know when I will be able to get to that. You will have to make sure your DiSEqC switch is set at correct position before actually tuning to a channel.
-
I scan only one satelite at the fourth port of the switch and program the correct channel names recognized and another port of satellite I did not switched, but there is no signal from the card. How i can sure to switch correct port of the diseqC ?
-
How i can sure to switch correct port of the diseqC ?
You can try it in another application. If a channel works there, the position should be correct.
-
so what use has the select "Diseqc Type" box then?