INTERACT FORUM
More => Old Versions => JRiver Media Center 20 for Windows => Topic started by: salora on June 08, 2015, 02:51:31 pm
-
Hi everyone
Hère is my setup
À computer with powerdvd15 mc20 with wdm driver, an asus hdav 1.3 deluxe an NVIDIA vidéo card with HDMI 1.3 and a Denon avr3808.
When i play a blu-ray with 7.1 sound :
Over hdmi my receiver see 7.1 sound.
Directly to the soundcard it sees 7.1 sound.
Over mc20 wdm driver , it sees 2 channel sound.
I can't see what parameter to change, if i decode sound with powerdvd15 or not it doesnt change anything.
Thanks for help
Regards
-
I don't use WDM so maybe this won't help/work - but if you go the Windows Sound properties, click on the WDM properties, and look at the Advanced Tab, does it give you the option to select higher quality?
-
Of course it was set to 2 channel... Pffff big fail hère
Thx
-
Just remember that everytime you update JRiver (or it updates itself) you need to go back into the settings and change it from 2 channel to 5 or 7.
Another thing I find is I get major audio lag if I have a different sample rate for the WDM driver then the source which is almost always Power DVD.
So PowerDVD is almost always going to be 48KHz so that's what I set the WDM driver to so it does no re-sampling.
-
Just remember that everytime you update JRiver (or it updates itself) you need to go back into the settings and change it from 2 channel to 5 or 7.
If installed as an administrator, it seems that may not be the case: https://yabb.jriver.com/interact/index.php?topic=97111.msg676366#msg676366