INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]  (Read 10487 times)

PPMPPM

  • Recent member
  • *
  • Posts: 19

Hello,

After last Windows 10 64-bit upgrade, few days ago, MC 21 and 23 (just downloaded for test - I installed 64bit) stop playing movies with MadVR exclusive mode - when switching from windowed mode to exclusive screen goes black.

I don't know it's a W10 upgrade problem but i didn't change in my W10 settings. With MPC-HC everything works great. I tried everything. Every possible video decoders with MadVR don't work. In Windowed mode MadVR works great.

Another problem - after playing movie, when I exit Theater View there are no visible menus and options on the left side. See attachment. Problem exist on 21 and 23 version.

It's the first time I have a problem with MC that I can't solve.

My computer is i5-3450 with nVidia GeForce 970.
Logged

TheShoe

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 826
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade
« Reply #1 on: December 12, 2017, 06:23:01 pm »

same here.   downgraded from the fall creators update and things worked again
Logged

GaryM

  • Recent member
  • *
  • Posts: 49
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #2 on: December 13, 2017, 03:47:31 pm »

I have this problem too, but I'd rather not downgrade Windows. I've installed the latest Nvidia drivers... no go. Red October Standard is fine. Do the JRiver team have any solutions or do I need to go over to the MadVR support forums?
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72541
  • Where did I put my teeth?
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #3 on: December 14, 2017, 01:57:55 am »

Did you get the drivers from Nvidia?  Try a search to see if there are known problems with the latest drivers.

Are you using ROHQ without changes?
Logged

PPMPPM

  • Recent member
  • *
  • Posts: 19
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #4 on: December 14, 2017, 05:54:53 am »

Last night I rolled back W10 update, and everything works great again. But before that I checked everything - installed latest nVidia drivers, latest MadVR, latest LAV, checked every possible MadVR options - every time MC entered Exclusive mode I've got black screen. Others Video Renderers works (MadVR Windowed too). Audio goes normal, anyway. It's with every video decoder I used. As I said before - MPC-HC works great.

But MadVR EM isn't only one drawback. Another is dissapearing menus - I posted screenshot.
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72541
  • Where did I put my teeth?
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #5 on: December 14, 2017, 09:12:00 am »

Are you using Red October HQ unmodified?  Or are you using your own versions of madVR and LAV.  We don't support anything but ROHQ unmodified.
Logged

eam81969

  • Recent member
  • *
  • Posts: 23
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #6 on: December 16, 2017, 02:59:37 pm »

Thank you for this.  I have (had) the exact same problem.  And, rolling back the windows creator release resolved it.
Logged
i5-6500 6M Skylake Quad-Core 3.2 GHz LGA 1151 w/Intel HD Graphics 530
ASRock H170M Pro4 LGA 1151 Intel H170 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Mobo
8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000)
HGST Deskstar NAS 4TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" HD
DVDFab
Windows 10
JRMark: 4405

PPMPPM

  • Recent member
  • *
  • Posts: 19
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #7 on: December 19, 2017, 05:38:11 am »

As you can see it isn't only my problem, and I think it must be solved, because stop upgrading W10 just for MC to work properly, isn't way to go for long. Problem exists on JRMC21 and 23. On fresh install too - without custom filters. And as I said MPC-HC on system madVR works great.

Right now I disabled autoupdate W10 for month.

Anyway your program is best :)
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7892
  • Long cold Winter...
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #8 on: December 19, 2017, 05:43:31 am »

On fresh install too

Fresh Windows 10 Fall Creators Update install? Now this interests me, as it disproves my previous thought that this was caused by a broken Windows upgrade. It *still* could be graphics drivers though - as far as I know the Fall Creators Update ships with WDDM 2.3 (but I doubt this alone could cause an issue). What GPU are you using? Onboard graphics (e.g. Intel) or a discrete GPU like AMD or Nvidia? You could try doing a clean graphics drivers install using Display Driver Uninstaller after downloading the latest graphics drivers first (and disable the Internet so Windows doesn't install the drivers from Windows Update).

Actually, everyone having this issue... what GPU are you using? Intel? AMD? Nvidia? Knowing this might expose a pattern.

I will say this though... the Fall Creators Update has been one of the more buggy Windows 10 releases. Even with a clean install, I've had problems right from the start with user accounts/profiles corrupting themselves upon a clean install and installing the latest Windows Updates and the Cortana bar on the taskbar changing to white instead of the darker color (which is ugly, IMO).
Logged
I don't work for JRiver... I help keep the forums safe from "male enhancements" and other sources of sketchy pharmaceuticals.

Windows 11 24H2 Update 64-bit + Ubuntu 24.10 Oracular Oriole 64-bit | Windows 11 24H2 Update 64-bit (Intel N305 Fanless NUC 16GB RAM/500GB M.2 NVMe SSD)
JRiver Media Center 33 (Windows + Linux) | iFi ZEN DAC 3 | JBL 306P MkII Studio Monitors | Audio-Technica ATH-M50x Headphones

Manfred

  • Citizen of the Universe
  • *****
  • Posts: 1038
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #9 on: December 19, 2017, 06:28:05 am »

At my place with GTX 960 and a GTX 1070 (latest driver), intel i3+i7 and I have no problems running Win 10 Fall Creators update. I use madVR (ROHQ) but not one of the KI algorithm's.
Logged
WS (AMD Ryzen 7 5700G, 32 GB DDR4-3200, 8=2x2+4 TB SDD, LG 34UC98-W)-USB|ADI-2 DAC FS|Canton AM5 - File Server (i3-3.9 GHz, 16GB ECC DDR4-2400, 46 TB disk space) - Media Renderer (i3-3.8 GHz, 8GB DDR4-2133, GTX 960)-USB|Devialet D220 Pro|Audeze LCD 2|B&W 804S|LG 4K OLED )

PPMPPM

  • Recent member
  • *
  • Posts: 19
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #10 on: December 20, 2017, 03:45:56 am »

In first post I wrote my main computer components - i5-3450 and GTX 970. Again - I do nothing more with my PC than update to Fall Creators. After this, MC and MadVR (in that time 21) stopped working in Exclusive Mode. I tried everything - update graphics driver, madVR, LAV. Without success. Then fresh install of MC 23 - nothing changed. After one day of fight with PC (sunday, wife wasn't happy :) and first answer to my post I rolled back W10 update and everything works again.

As I said it's problem with MadVR in exclusive mode. Windowed works. And main important AGAIN - MPC-HC WORKS GREAT with madVR in Exclusive mode in Fall Creators.

I'm ready to buy v23 :) I tested and it's great, very stable - 64bit.
Logged

GaryM

  • Recent member
  • *
  • Posts: 49
Re: Black screen when entering MadVR Exclusive Mode after W10 upgrade [Solved]
« Reply #11 on: December 26, 2017, 05:29:31 pm »

Mine is Nvidia and the only way to overcome this problem was to turn off exclusive mode in Madvr settings.


Logged
Pages: [1]   Go Up