Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[drmimosa]

Hello, and Happy Holidays to the JRiver team.

I'm not sure if this is a just Linux problem, but I've tested it on an i7 and a RaspPi.

DSP presets don't save adaptive volume settings. For example, if I check "Adaptive Volume" and click "Night Mode" and save a preset "Night", it won't activate when I load the preset.

I'm trying to make a MCWS switch for night mode and small speaker mode.

Thanks!

[drmimosa]

OK never mind. Found this functionality under a different MCWS call:

Code: [Select]

  SetAdaptiveVolume
         Set the adaptive volume setting.
         Parameters:
            Strength: The strength (1, 2, or 3 or 0 for off). (default: )
            Zone: The zone the command is targetted for. (default: -1)
            ZoneType: The type of value provided in 'Zone' (ID: zone id; Index: zone index; Name: zone name). (default: ID)
         Response:
         Examples:
            Set to night mode.
Maybe it would still be useful to expand the DSP presets to include everything in the DSP menu's left hand check boxes.

[drmimosa]

Something may be wrong with the Linux MCWS calls for DSP.

They only seem to work if I make the call, then click on the DSP menu. If I send the MCWS request alone, nothing happens. Can anyone duplicate this?

Also, seriously no rush. Happy New Years to all!

[drmimosa]

Hi, I figured this out everything works. I didn't realize you have to switch on DSP with a separate MCWS request, then select Night Mode with the above request.

Code: [Select]

/MCWS/v1/DSP/Set?DSP=Adaptive%20Volume&On=1

[bob]

I can't seem to duplicate the issue with the DSP load/save settings unless I'm not understanding it properly.

If I set night mode under adaptive volume then save that out as night. Exit MC, restart it load the preset and it's still set to night mode.