Topic: Scan finds only 3 channels (Read 823 times)

Paul_Sinnema · « **on:** May 11, 2003, 01:11:30 pm »

Hi,

Downloaded MC9 today and installed it. I've got a Medion MD 9592 TV/Radion Tuner card installed in my computer. We receive our signal from UPC (www.upc.nl) in the Netherlands.

At first the 'Video Capture Filter' was set to NTSC. But after setting it to PAL_B and clicking 'Scan', I could see all the channels passing one by one in the preview but only 3 channels were found (Video Composite, Video SVideo and channel 45). None of the available channels on the cable were found (channel 45 contains nothing).

Now I've printed out the channels from UPC and all the stations have a + or - sign behind the channel nbr. (f.i. BBC 1 = channel 60+). Could that have to do with anything.

What the purpose of the 'TV Tuner Property Page'. Is that a page where MC9 finds information for the channels. UPC doesn't support anything like that.

Paul.

JimH · « **Reply #1 on:** May 11, 2003, 04:20:35 pm »

Yaobing will probably answer soon, but did you set the country code?

You can start over by resetting MC somewhere in the advanced settings.

Paul_Sinnema · « **Reply #2 on:** May 14, 2003, 07:50:55 am »

Yes, I did. (31 - Netherlands)

Paul_Sinnema · « **Reply #3 on:** May 24, 2003, 12:38:24 am »

I still have the problem. I'm now watching TV via my videorecorder of which I found the right channel on the TV Tuver card. I flip channels on the recorder (not MC).

INTERACT FORUM

Author Topic: Scan finds only 3 channels (Read 823 times)

Paul_Sinnema

Scan finds only 3 channels

JimH

Re: Scan finds only 3 channels

Paul_Sinnema

Re: Scan finds only 3 channels

Paul_Sinnema

Re: Scan finds only 3 channels