Topic: OT - So what does everyone do for a living (Read 4545 times)

WolfWalker · « **on:** October 15, 2002, 12:10:44 pm »

I don't know if this is aloud or not.

I am a Accountant with my poor grammer and spelling I better be good with numbers.

nila · « **Reply #1 on:** October 15, 2002, 02:30:00 pm »

I'm a self employed web designer/ IT Contractor

KingSparta · « **Reply #2 on:** October 15, 2002, 02:35:18 pm »

I Kill Rats And Bugs

Daryl, Daryl And Daryl's Pest Control

Scronch · « **Reply #3 on:** October 15, 2002, 02:58:43 pm »

I am a waterboy for the Minnesota Vikings. I wipe Randy Moss' nose.

Scronch

zevele10 · « **Reply #4 on:** October 15, 2002, 03:50:52 pm »

WE have Harry The Hisper
And now:

SCRONCH THE WIPER.

I do not know to what you changed your morning toasts,but since few weeks you have terrific,harsh,black humour,brillant posts..
Poster number one in my pool ,IS YOU.

Keep going like it,you give me big laughts

By the way, during your toasts time you had,of cause ,posts allmost as good than now.
But not as good.

I am a christian preacher.Living in Israel it is hard to find job,so i am on the dole

Scronch · « **Reply #5 on:** October 15, 2002, 04:29:17 pm »

SCRONCH THE WIPER

I will try to live up to that. I suppose if I run out of work, I can always get a gig in a nursing home.

ba dump bump.

Scronch a.k.a. THE WIPER

JohnPurdue · « **Reply #6 on:** October 15, 2002, 06:04:55 pm »

I work in the IT department at a big 10 university.

Scronch · « **Reply #7 on:** October 15, 2002, 06:07:05 pm »

...of which there are 11. Go figure.

Den · « **Reply #8 on:** October 16, 2002, 04:04:26 am »

I manage an Analytical Science Lab for a consumer products company.
Also dabble in dBase programing (dB2K) and networking.

Den

Tangoman · « **Reply #9 on:** October 16, 2002, 04:12:01 am »

Film rerecording mixer and Tango dancer in my spare time

Gerrysan

jgourd · « **Reply #10 on:** October 16, 2002, 04:58:55 am »

Up until this week I was a software engineer for a medical imaging company that I helped to found.

Now, I am a live recording engineer / AV consultant for trade shows.

Chico · « **Reply #11 on:** October 16, 2002, 05:12:18 am »

I work for W. L. Gore & Associates, Inc. (makers of Gore-Tex (R) Fabric) in the RF and Microwave products division. I run a testing lab for Gore. It's my job to destroy what we make. I analyze new designs and test our products for survival in their end use environment. Pretty neat actually, I work on some of the latest in telecommunications, space, and military technologies.

NoCodeUK · « **Reply #12 on:** October 16, 2002, 06:28:36 am »

I work(!) for an inet company called email4property which helps peeps in the UK to move house. But seeing as I am at "work" now but am typing this message then "work" is probably not the right word

Adam

DocLotus · « **Reply #13 on:** October 16, 2002, 11:26:29 am »

Just retired, and loving every minute of it!!

Cephlen · « **Reply #14 on:** October 16, 2002, 11:31:22 am »

Official title - "Software Design Engineer"

I do a lot of database and architectual work, along with some .net programming. I mostly work on web based projects.

I work for a large software company.

(POST 69!!)

Chris Shaw · « **Reply #15 on:** October 16, 2002, 02:03:31 pm »

Visual effects for movies

Cmagic · « **Reply #16 on:** October 16, 2002, 02:11:57 pm »

I'm doing research on hardware architecture for future computing machines in a serious
scientific lab.

I started by examining the inner wiring of my own brain to get some inspiration,
but I think I lost a few parts while trying to re-assemble it :-/

Scronch · « **Reply #17 on:** October 16, 2002, 04:32:28 pm »

>I lost a few parts while trying to re-assemble it.

That's very bad. Never continue on if you end up with parts. A very good friend of mine did a total rebuild on his engine. This would've been about 20-25 years ago, and as I recall it was a Nova. When he was all done, he had one little, round part left. Oh, well, not to worry--he called up a friend and they went cruisin'. Except while sitting at a stoplight--POOF, flames came shooting our from under the hood. They jumped out, and got to watch the whole car burn. The fire department was rolling laughing when they got the whole story--turns out that little round piece was supposed to secure the gasline to the carburetor.

True story.

Scronch

zevele10 · « **Reply #18 on:** October 17, 2002, 02:22:47 am »

My old Canon printer did work fine for almost a year whitout a quitte big part in white plastic i never found out where to put it back.

WolfWalker
I am a painter-decorator-inside home designer .
Inside home designer sounds a lot like a very special thing.
But in fact it is just to make plans when people do not want to take an architect.Most of the case it means,broking,moving some walls, making windows bigger ;not changing all the place.
The second task is when an architect involved to check if he belongs to the kind who fully realise that people will live in the place.
Kitchen is the main problem.They do not realise that you have to open a fridge and do think there is 25 centimeters large washing-machine......

KeystoneCop · « **Reply #19 on:** October 17, 2002, 03:50:09 pm »

I did 37 years of computers (yes they had tubes then), now I just see what the younger generation is up to. must be fun to release a program every other day. In the good old days we had to test our code before we released it. must be nice to have so many testers for FREE.

Scronch · « **Reply #20 on:** October 17, 2002, 03:51:53 pm »

Yeah, but you didn't sell it for $25. It's a new marketing environment. Where did you work? IBM? HP?

Scronch

Kurt Young · « **Reply #21 on:** October 17, 2002, 03:57:04 pm »

Hehe, I'm a contractor, doing tier3 network/desktop support and part-time projects manager.

But what I really want to do is direct...

Scronch · « **Reply #22 on:** October 17, 2002, 04:00:08 pm »

Nah, that's King's job...

JimH · « **Reply #23 on:** October 17, 2002, 04:23:15 pm »

Quote

>I lost a few parts while trying to re-assemble it.

That's very bad. Never continue on if you end up with parts. A very good friend of mine did a total rebuild on his engine. This would've been about 20-25 years ago, and as I recall it was a Nova. When he was all done, he had one little, round part left. Oh, well, not to worry--he called up a friend and they went cruisin'. Except while sitting at a stoplight--POOF, flames came shooting our from under the hood. They jumped out, and got to watch the whole car burn. The fire department was rolling laughing when they got the whole story--turns out that little round piece was supposed to secure the gasline to the carburetor.

I have another engine story. It's hard to tell.

I had a friend (we were around 25 years old, both of us). He went rock climbing in the Sierras. On Sunday night, another friend called looking for his girl friend. I said, "I don't know where she is. Why?".

"Peter is dead. There was a rock slide. He's gone."

A couple days later, I called his parents, said I was sorry, asked if they would let me rebuild the engine he had pulled out of his VW and left under canvas at a fraternity house near the University of California Berkeley. I asked if his girl friend could have it. They said, "sure".

I was a carpenter, but I thought, "maybe I can do it".
It worked. It took around 6 months of me reading "The Complete Idiot's Guide to the VW" and a lot of four letter ****'s, but it ran.

sekim · « **Reply #24 on:** October 17, 2002, 04:50:07 pm »

Part-time carpenter. Full time jackass.

I had a '65 Chevy Impala SS years ago. An old roommate said he could 'adjust' the timing by ear. Sure could, once the flames subsided. If he even looked at that thing after that I gave him the, 'Don't you even think about it ' stare..

Good thing the garden hose was still connected in early fall. Otherwise I might have had car-b-que.

JimH · « **Reply #25 on:** October 18, 2002, 02:24:01 am »

I had a 65 Impala two door with a 327 engine. It cost $2525 new. Great car!

INTERACT FORUM

Author Topic: OT - So what does everyone do for a living (Read 4545 times)

nila

zevele10

Den

zevele10

sekim