INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Will the Hauppauge PVR500 work?  (Read 4829 times)

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Will the Hauppauge PVR500 work?
« on: May 20, 2005, 12:15:50 pm »
I'm considering using a PVR500, but do they work in MC?

Thanks in advance!
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: Will the Hauppauge PVR500 work?
« Reply #1 on: May 20, 2005, 04:24:30 pm »
I have not tested PVR500. That is why it is not on the list of supported devices. If I have to guess, I would say it probably would not work, until I added code for it. For the very least, since this device has two tuners, and MC does not support duel/multiple tuners. Will it work if you don't care about the second tuner? Someone should just try it (I will do it sometime in the future).
Logged
Yaobing Deng, JRiver Media Center

Mastiff

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1988
  • The Multi-Zone Tzar
Re: Will the Hauppauge PVR500 work?
« Reply #2 on: May 20, 2005, 04:33:09 pm »
OK, then I'll wait until somebody (perhaps you) tries it. Thanks!
Logged
Tor with the Cinema Inferno & Multi-Zone Audio system

simon2

  • Member
  • *
  • Posts: 2
Re: Will the Hauppauge PVR500 work?
« Reply #3 on: September 14, 2005, 03:16:42 pm »
Works.

Just one tuner naturally (multiple tuner support would be nice). MC seems to have trouble with scanning channels (manually adding them works), but I've seen that with other cards too.

Simon
Logged

gunnarbrathen

  • Member
  • *
  • Posts: 4
Re: Will the Hauppauge PVR500 work?
« Reply #4 on: October 26, 2005, 06:06:43 am »
I have followed Mastiff's articles on building HTPC and bought Happauge PVR500 MCE for another PC. I moved the TV card to the HTPC and managed to receive beautiful TV-pictures by choosing antenna (not cable). But, the sound is missing. There is a message that says that I need to set up an audio cable from the TV-card to the sound card. I use Audigy2ZS. But I can't figure out how since there is no audio output contact from the TV-card.
Logged

gunnarbrathen

  • Member
  • *
  • Posts: 4
Re: Will the Hauppauge PVR500 work?
« Reply #5 on: October 26, 2005, 06:14:17 am »
Found some advice in another posting an unchecked "audio cable" alternative in Options. Selected Direct sound and Whow. Hauppauge PVR500 MCR works. I have so far only tried one of the two tv-tuners
Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: Will the Hauppauge PVR500 work?
« Reply #6 on: October 26, 2005, 08:29:39 am »
Thank you all for the updates.
Logged
Yaobing Deng, JRiver Media Center

torpadal

  • Recent member
  • *
  • Posts: 24
Re: Will the Hauppauge PVR500 work?
« Reply #7 on: March 10, 2006, 01:39:11 am »
I've just innstalled the PVR-500 and it works fine.

Is there any plans on supporting multiple tuners in the near future?

Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: Will the Hauppauge PVR500 work?
« Reply #8 on: March 10, 2006, 09:06:13 am »
Quote from: torpadal on March 10, 2006, 01:39:11 am
Is there any plans on supporting multiple tuners in the near future?
Maybe in Version 12. Not guaranteed though  ;)
Logged
Yaobing Deng, JRiver Media Center

torpadal

  • Recent member
  • *
  • Posts: 24
Re: Will the Hauppauge PVR500 work?
« Reply #9 on: March 27, 2006, 06:36:52 am »
OK. Is there any release date set for v.12? Have found a few other things with this card that I wonder about:

1. In the Options menu I found a checkbox for Invers Telecine. This seems to improve the picture on some channels. Problem is that when I close MC and turn it on agian, the setting is gone. It does not seem to be able to store this setting. Is there anywhere else I can set this (and make it stay)? Is it a registry setting?

2. Another problem I found was that I'm not able to watch a DVD (with Zoomplayer) at the same time record a TV program (set with the timer). I get a error message saying: 'Error: Failed to render video stream. Possible cause: The video capture driver is in use...Code:0x8000ffff'.

Is this not possible??!?
Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: Will the Hauppauge PVR500 work?
« Reply #10 on: March 27, 2006, 08:48:32 am »
Quote from: torpadal on March 27, 2006, 06:36:52 am
OK. Is there any release date set for v.12?

No release date yet. We are still working on ver 11.1.

Quote
Have found a few other things with this card that I wonder about:

1. In the Options menu I found a checkbox for Invers Telecine. This seems to improve the picture on some channels. Problem is that when I close MC and turn it on agian, the setting is gone. It does not seem to be able to store this setting. Is there anywhere else I can set this (and make it stay)? Is it a registry setting?

I do not recognize this option. It must be on the property pages of the driver filters. Generally we can not do much about such custom options.

Quote
2. Another problem I found was that I'm not able to watch a DVD (with Zoomplayer) at the same time record a TV program (set with the timer). I get a error message saying: 'Error: Failed to render video stream. Possible cause: The video capture driver is in use...Code:0x8000ffff'.

Is this not possible??!?

It seems that ZoomPlayer and MC try to use the same resource that can not be shared. This could be video display resource, or video decoder. Try changing what decoder zoomplayer uses.
Logged
Yaobing Deng, JRiver Media Center

torpadal

  • Recent member
  • *
  • Posts: 24
Re: Will the Hauppauge PVR500 work?
« Reply #11 on: May 24, 2006, 06:24:57 am »
I now found out that the recording works fine as long as I use Zoomplayer on the PC screen, i.e. same display as the MC recording window pops up in. The error message comes when I watch a film on the projector. Is there any way around this?
Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: Will the Hauppauge PVR500 work?
« Reply #12 on: May 24, 2006, 08:38:36 am »
Quote from: torpadal on May 24, 2006, 06:24:57 am
I now found out that the recording works fine as long as I use Zoomplayer on the PC screen, i.e. same display as the MC recording window pops up in. The error message comes when I watch a film on the projector. Is there any way around this?

This sounds like a video driver limitation. I have no idea what to do about it.
Logged
Yaobing Deng, JRiver Media Center

MrHaugen

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 3774
Re: Will the Hauppauge PVR500 work?
« Reply #13 on: May 30, 2007, 03:56:56 am »
So this MCE of Happauge 500 will work in XP? I'm just wondering since it says "Windows Media Center Edition required" on several computer stores.
Any news on the dual tuner support in MC 12 by the way?
Logged
- I may not always believe what I'm saying

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: Will the Hauppauge PVR500 work?
« Reply #14 on: May 30, 2007, 12:23:49 pm »
Quote from: MrHaugen on May 30, 2007, 03:56:56 am

Any news on the dual tuner support in MC 12 by the way?

That is still a long way away. No hope of getting it in MC12. Sorry.
Logged
Yaobing Deng, JRiver Media Center
Pages: [1]   Go Up
« previous next »