INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Here's how to build libcurl3 if you need it  (Read 7167 times)

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Here's how to build libcurl3 if you need it
« on: October 16, 2013, 03:01:14 pm »

If you need libcurl3 for non-Debian distros, here's how to build it easily.

You'll need the following packages (the exact names will change per distro).  
gcc
binutils
make
glibc-devel
libssh2-devel
openssl-devel (may be called libopenssl-devel)
zlib-devel

If you're on a 64bit distro, you'll need the 32bit versions of the last 4 packages.  They may be suffixed with .i686 or -32bit.

Download and extract the latest libcurl from http://curl.haxx.se/download/curl-7.33.0.tar.gz
Download the attached script into the curl-7.33.0 directory.
Now...
Code: [Select]
cd curl-7.33.0
chmod a+x libcurl-configure
./libcurl-configure.txt

# Assuming no errors
make

# Assuming no errors
readelf -V lib/.libs/libcurl.so.4.3.0
# in the version definition section you should see entries for CURL_OPENSSL_4 and CURL_OPENSSL_3
Version definition section '.gnu.version_d' contains 4 entries:
  Addr: 0x0000000000003a9c  Offset: 0x003a9c  Link: 4 (.dynstr)
  000000: Rev: 1  Flags: BASE   Index: 1  Cnt: 1  Name: libcurl.so.4
  0x001c: Rev: 1  Flags: none  Index: 2  Cnt: 1  Name: HIDDEN
  0x0038: Rev: 1  Flags: none  Index: 3  Cnt: 1  Name: CURL_OPENSSL_4
  0x0054: Rev: 1  Flags: none  Index: 4  Cnt: 1  Name: CURL_OPENSSL_3

# Assuming MC is installed in "/usr/lib/jriver/Media Center 19"
# you need to copy the shared lib and its links to the MC install directory
cp -d lib/.libs/libcurl.so* "/usr/lib/jriver/Media Center 19"

# Now start Media Center with the LD_LIBRARY_PATH set to the MC install dir.
LD_LIBRARY_PATH="/usr/lib/jriver/Media Center 19" mediacenter

Logged
Fedora 40 x86_64 Xfce

Mike Noe

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 792
Re: Here's how to build libcurl3 if you need it
« Reply #1 on: October 16, 2013, 03:25:33 pm »

thx.  Just curious, on openSuSe, /usr/lib/libcurl.so.4.3.0 has no entries for OPENSSL in the version header, but all still works with MC.  Is it because of the relocation table:

readelf -V /usr/lib/libcurl.so.4.3.0 | grep SSL:
Code: [Select]
0006b018  00000407 R_386_JUMP_SLOT   00000000   SSL_connect
0006b024  00000707 R_386_JUMP_SLOT   00000000   SSL_CTX_set_srp_passwo
0006b0a4  00002507 R_386_JUMP_SLOT   00000000   SSL_get1_session
0006b0b0  00002807 R_386_JUMP_SLOT   00000000   SSL_set_session
0006b0cc  00003007 R_386_JUMP_SLOT   00000000   UI_OpenSSL
0006b0d4  00003207 R_386_JUMP_SLOT   00000000   OPENSSL_add_all_algori
0006b0dc  00003407 R_386_JUMP_SLOT   00000000   SSL_CTX_set_verify
0006b0e4  00003607 R_386_JUMP_SLOT   00000000   SSL_SESSION_free
0006b120  00004607 R_386_JUMP_SLOT   00000000   SSL_ctrl
0006b12c  00004907 R_386_JUMP_SLOT   00000000   SSL_load_error_strings
0006b134  00004b07 R_386_JUMP_SLOT   00000000   SSL_peek
0006b170  00005a07 R_386_JUMP_SLOT   00000000   SSLv2_client_method
0006b184  00005f07 R_386_JUMP_SLOT   00000000   SSL_CTX_check_private_
0006b18c  00006207 R_386_JUMP_SLOT   00000000   SSL_CTX_use_certificat
0006b1a4  00006807 R_386_JUMP_SLOT   00000000   SSL_get_peer_certifica
0006b1c0  00006f07 R_386_JUMP_SLOT   00000000   SSL_free
0006b214  00008507 R_386_JUMP_SLOT   00000000   SSL_CTX_add_client_CA
0006b218  00008607 R_386_JUMP_SLOT   00000000   SSL_get_certificate
0006b224  00008a07 R_386_JUMP_SLOT   00000000   SSL_CTX_set_default_pa
0006b22c  00008c07 R_386_JUMP_SLOT   00000000   SSLv3_client_method
0006b26c  00009b07 R_386_JUMP_SLOT   00000000   SSL_set_connect_state
0006b278  00009e07 R_386_JUMP_SLOT   00000000   SSL_CTX_new
0006b280  00009f07 R_386_JUMP_SLOT   00000000   SSL_get_verify_result
0006b2a0  0000a607 R_386_JUMP_SLOT   00000000   SSL_read
0006b2a8  0000a807 R_386_JUMP_SLOT   00000000   SSL_set_fd
0006b2b0  0000aa07 R_386_JUMP_SLOT   00000000   SSL_CTX_use_PrivateKey
0006b2bc  0000ac07 R_386_JUMP_SLOT   00000000   SSL_pending
0006b2d0  0000b107 R_386_JUMP_SLOT   00000000   SSL_get_current_cipher
0006b328  0000c407 R_386_JUMP_SLOT   00000000   SSL_CTX_load_verify_lo
0006b338  0000c807 R_386_JUMP_SLOT   00000000   SSL_CIPHER_get_name
0006b35c  0000d007 R_386_JUMP_SLOT   00000000   SSLv23_client_method
0006b388  0000db07 R_386_JUMP_SLOT   00000000   SSL_get_privatekey
0006b3ac  0000e307 R_386_JUMP_SLOT   00000000   SSL_CTX_use_PrivateKey
0006b3b0  0000e407 R_386_JUMP_SLOT   00000000   SSL_library_init
0006b3b8  0000e607 R_386_JUMP_SLOT   00000000   SSL_CTX_set_default_pa
0006b3c4  0000e907 R_386_JUMP_SLOT   00000000   SSL_CTX_use_certificat
0006b3e8  0000f307 R_386_JUMP_SLOT   00000000   SSL_CTX_set_cipher_lis
0006b3f4  0000f507 R_386_JUMP_SLOT   00000000   SSL_new
0006b400  0000f807 R_386_JUMP_SLOT   00000000   SSL_CTX_use_certificat
0006b408  0000fa07 R_386_JUMP_SLOT   00000000   SSL_write
0006b418  0000ff07 R_386_JUMP_SLOT   00000000   SSL_CTX_get_cert_store
0006b46c  00011307 R_386_JUMP_SLOT   00000000   SSL_CTX_callback_ctrl
0006b4b0  00012407 R_386_JUMP_SLOT   00000000   SSL_shutdown
0006b4b4  00012507 R_386_JUMP_SLOT   00000000   SSL_CTX_set_srp_userna
0006b4cc  00012b07 R_386_JUMP_SLOT   00000000   SSL_get_shutdown
0006b534  00014307 R_386_JUMP_SLOT   00000000   SSL_CTX_ctrl
0006b568  00014f07 R_386_JUMP_SLOT   00000000   SSL_get_error
0006b578  00015207 R_386_JUMP_SLOT   00000000   SSL_CTX_free
0006b58c  00015607 R_386_JUMP_SLOT   00000000   SSLeay
0006b598  00015907 R_386_JUMP_SLOT   00000000   SSL_get_peer_cert_chai

It also shows:
 0x00000001 (NEEDED)                     Shared library: [libssl.so.1.0.0]
Logged
openSUSE TW/Plasma5 x86_64 | Win10Pro/RX560
S.M.S.L USB-DAC => Transcendent GG Pre (kit) => Transcendent mono OTLs (kit)
(heavily modded) Hammer Dynamics Super-12s (kit)
(optionally) VonSchweikert VR8s

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Re: Here's how to build libcurl3 if you need it
« Reply #2 on: October 16, 2013, 03:42:04 pm »

Actually I was going to ask bob about that.  The mediacenter executable doesn't load libcurl directly, libJRreader.so does.  If you do an ldd libJRreader.so I think you'll see that there a complaint about libcurl not having version information.  What I'd like to know from bob is how we can tell whether libcurl is actually working or not.  Maybe try doing a check for updates or something.

Logged
Fedora 40 x86_64 Xfce

Mike Noe

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 792
Re: Here's how to build libcurl3 if you need it
« Reply #3 on: October 16, 2013, 04:03:54 pm »

yeah, good point, I think it's probably not working based on this:

ldd libJRReader.so
Code: [Select]
./libJRReader.so: /usr/lib/libcurl.so.4: no version information available (required by ./libJRReader.so)
        linux-gate.so.1 (0xf772c000)
        libcurl.so.4 => /usr/lib/libcurl.so.4 (0xf703a000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0xf6eff000)
        libpthread.so.0 => /lib/libpthread.so.0 (0xf6ee2000)
.
.
.

Unless I'm misunderstanding and it's now looking for "4"?
Logged
openSUSE TW/Plasma5 x86_64 | Win10Pro/RX560
S.M.S.L USB-DAC => Transcendent GG Pre (kit) => Transcendent mono OTLs (kit)
(heavily modded) Hammer Dynamics Super-12s (kit)
(optionally) VonSchweikert VR8s

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Re: Here's how to build libcurl3 if you need it
« Reply #4 on: October 16, 2013, 04:17:53 pm »

libcurl numbering is a little strange.  The .so file numbering isn't necessarily the same as the CURL_ version and neither are the same as the original source packaging.  There are packages like libcurl3-7.32.0 that have files like libcurl.so.4 in them. :)
Logged
Fedora 40 x86_64 Xfce

Mike Noe

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 792
Re: Here's how to build libcurl3 if you need it
« Reply #5 on: October 16, 2013, 04:29:25 pm »

of course.  ;)

I just built per your instructions, had to install gcc48-32bit support, which apparently got the rest.  Anyway, no OPENSSL in the version section:

mike@linux-30ty:~/Packages/curl-7.33.0> readelf -V lib/.libs/libcurl.so.4.3.0
Code: [Select]
Version needs section '.gnu.version_r' contains 1 entries:
 Addr: 0x0000000000004ea0  Offset: 0x004ea0  Link: 5 (.dynstr)
  000000: Version: 1  File: libc.so.6  Cnt: 6
  0x0010:   Name: GLIBC_2.3  Flags: none  Version: 7
  0x0020:   Name: GLIBC_2.7  Flags: none  Version: 6
  0x0030:   Name: GLIBC_2.14  Flags: none  Version: 5
  0x0040:   Name: GLIBC_2.17  Flags: none  Version: 4
  0x0050:   Name: GLIBC_2.3.4  Flags: none  Version: 3
  0x0060:   Name: GLIBC_2.2.5  Flags: none  Version: 2

Logged
openSUSE TW/Plasma5 x86_64 | Win10Pro/RX560
S.M.S.L USB-DAC => Transcendent GG Pre (kit) => Transcendent mono OTLs (kit)
(heavily modded) Hammer Dynamics Super-12s (kit)
(optionally) VonSchweikert VR8s

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Re: Here's how to build libcurl3 if you need it
« Reply #6 on: October 16, 2013, 04:43:52 pm »

I think you're missing the openssl 32 bit libraries.  

Try
yast -i libopenssl-devel-32bit

Oops, you may also need zlib-devel-32bit.
Logged
Fedora 40 x86_64 Xfce

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Re: Here's how to build libcurl3 if you need it
« Reply #7 on: October 16, 2013, 04:46:04 pm »

...and do...
make clean
./libcurl-configure.txt
make
Logged
Fedora 40 x86_64 Xfce

Mike Noe

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 792
Re: Here's how to build libcurl3 if you need it
« Reply #8 on: October 16, 2013, 05:07:43 pm »

I think you're thinking of "zypper" instead of yast..  ;)

libopenssl-32bit was there.  I added zlib....

now I get this at then end of the "configure":
checking run-time libs availability... failed
configure: error: one or more libs available at link-time are not available run-time. Libs used at link-time: -lssh2  -lssl -lcrypto -lssl -lcrypto  -lz

But this shouldn't affect the build, right?
Logged
openSUSE TW/Plasma5 x86_64 | Win10Pro/RX560
S.M.S.L USB-DAC => Transcendent GG Pre (kit) => Transcendent mono OTLs (kit)
(heavily modded) Hammer Dynamics Super-12s (kit)
(optionally) VonSchweikert VR8s

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Re: Here's how to build libcurl3 if you need it
« Reply #9 on: October 16, 2013, 05:24:56 pm »

Oh yeah... zypper. 

Anyway something's still not right.

Here's what I installed in my freshly installed 64 bit OpenSUSE vm...

gcc-32bit
glibc-devel-32bit
libssh2-devel
libssh2-1-32bit
libopenssl-devel-32bit
zlib-devel-32bit

They in turn installed a whole bunch of stuff.

One final gotcha was having to create a link in /usr/lib
ln -rs /usr/lib/libssh2.so.1.0.1 /usr/lib/libssh2.so





Logged
Fedora 40 x86_64 Xfce

Mike Noe

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 792
Re: Here's how to build libcurl3 if you need it
« Reply #10 on: October 16, 2013, 06:06:33 pm »

Okay, probably an issue here on my end, then.  Did you do an RC1 ISO or Factory?  I have a Factory+ (:)) install testing latest mesa and whatnot.  I'll try an RC1 install into a VM just to build the libcurl....

Edit:

Sweet mama, she lives....:
readelf -V lib/.libs/libcurl.so.4.3.0
Code: [Select]
Version definition section '.gnu.version_d' contains 4 entries:
  Addr: 0x0000000000003f88  Offset: 0x003f88  Link: 5 (.dynstr)
  000000: Rev: 1  Flags: BASE   Index: 1  Cnt: 1  Name: libcurl.so.4
  0x001c: Rev: 1  Flags: none  Index: 2  Cnt: 1  Name: HIDDEN
  0x0038: Rev: 1  Flags: none  Index: 3  Cnt: 1  Name: CURL_OPENSSL_4
  0x0054: Rev: 1  Flags: none  Index: 4  Cnt: 1  Name: CURL_OPENSSL_3

Just added your link from prev post...
Logged
openSUSE TW/Plasma5 x86_64 | Win10Pro/RX560
S.M.S.L USB-DAC => Transcendent GG Pre (kit) => Transcendent mono OTLs (kit)
(heavily modded) Hammer Dynamics Super-12s (kit)
(optionally) VonSchweikert VR8s

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Re: Here's how to build libcurl3 if you need it
« Reply #11 on: October 16, 2013, 06:12:48 pm »

I just downloaded the standard 12.3 64 bit install iso.
Logged
Fedora 40 x86_64 Xfce

bob

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 13875
Re: Here's how to build libcurl3 if you need it
« Reply #12 on: October 17, 2013, 11:01:32 am »

Actually I was going to ask bob about that.  The mediacenter executable doesn't load libcurl directly, libJRreader.so does.  If you do an ldd libJRreader.so I think you'll see that there a complaint about libcurl not having version information.  What I'd like to know from bob is how we can tell whether libcurl is actually working or not.  Maybe try doing a check for updates or something.
Libcurl is used for all of the media network file serving.
Logged

RemyJ

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1249
Re: Here's how to build libcurl3 if you need it
« Reply #13 on: October 17, 2013, 03:06:01 pm »

Libcurl is used for all of the media network file serving.

Gotcha.  It looks like it's working with the stock libcurl even though ldd complains about not finding version information.
Logged
Fedora 40 x86_64 Xfce
Pages: [1]   Go Up