INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: MadVR - Help with Choppiness Please  (Read 7687 times)

newguy1

  • Recent member
  • *
  • Posts: 47
MadVR - Help with Choppiness Please
« on: October 18, 2014, 11:40:10 am »

Hi All

I use OTA in JRiver and I'm trying to find a setting that will work with MadVR and I can't get it to work well, looking for advice.

I've shown where I've got the settings in MadVR below, but I think that it should do much better than that....am I wrong?

Thanks,

David



JRMark is about 4800, depending on system usage

My System

i7 4770k w/Z87 MoBo
10GB Ram
GTX760 (Zotac)
ASUS Xonar STX
Samsung UN46EH5000

MadVR Settings

devices - Removed all but my tv and the generic PnP.  It looks like it sees the generic as the active monitor, not the tv.

Processing - Stock settings

Scaling -
  Chroma - Jinc, 3 taps
  Image Doubling - off
  Image upscaling - JINC, 4 taps
  Image downscaling - Spline, 3 taps

Rendering - Stock settings except uncheck all 'trade quality for performance' boxes

user interface - stock settings
Logged

6233638

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 5353
Re: MadVR - Help with Choppiness Please
« Reply #1 on: October 18, 2014, 12:41:51 pm »

Check your rendering times (CTRL+J) to see that the render times are lower than the vsync interval.
It should only have to be lower than the movie frame interval, but try that first.

Your 760 might not be able to handle 4-tap Jinc upscaling. Try Lanczos 3 with anti-ringing.
Use Random Dithering or Ordered Dithering with "change dither for every frame" enabled.
Logged

newguy1

  • Recent member
  • *
  • Posts: 47
Re: MadVR - Help with Choppiness Please
« Reply #2 on: October 18, 2014, 01:43:36 pm »

Looking at the ctrl-j screen now, if the display is showing 59.999x and the source is 29.970, is that a bad thing?

I'm guessing that MadVR renders 60 frames instead of 30....
Logged

6233638

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 5353
Re: MadVR - Help with Choppiness Please
« Reply #3 on: October 18, 2014, 01:51:30 pm »

Looking at the ctrl-j screen now, if the display is showing 59.999x and the source is 29.970, is that a bad thing?
No, that is what you would expect.

The vsync time will be ~16.67ms and the movie frame interval will be ~33.3ms.
As long as Smooth Motion is not active, your render times should only have to be below the movie frame interval.
Logged

newguy1

  • Recent member
  • *
  • Posts: 47
Re: MadVR - Help with Choppiness Please
« Reply #4 on: October 18, 2014, 04:12:48 pm »

The ~16.67 and ~33.3 were there for a lower quality clip I played.

I'm trying a 23.97fps now and my vsync is 41.72ms and the movie frame interval is 41.71ms.

Is that bad?
Logged

6233638

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 5353
Re: MadVR - Help with Choppiness Please
« Reply #5 on: October 18, 2014, 04:31:45 pm »

1000/23.97 = 41.71ms
1000/29.97 = 33.36ms
1000/59.94 = 16.67ms
etc.
 
You need to use settings which have render times lower than the movie frame interval, and ideally below the vsync time.
The higher the framerate/refresh rate, the less time the GPU has to process the image.
Logged

newguy1

  • Recent member
  • *
  • Posts: 47
Re: MadVR - Help with Choppiness Please
« Reply #6 on: October 18, 2014, 05:08:27 pm »

Gotcha.  I noticed that the render time stayed below for the most part, but crept up to 44ms or so.

Been playing with it a little, changed some of the settings, down to about 36ms, but not sure if it's the best use of resources:

Chroma Upscaling - Lanzos 3 tap

Image doubling
  Luma - 16 neurons
  Chroma - 16 neurons

Image upscaling - Lanczos 3 tap
Logged

newguy1

  • Recent member
  • *
  • Posts: 47
Re: MadVR - Help with Choppiness Please
« Reply #7 on: October 18, 2014, 07:44:32 pm »

Well, getting this figured out, I think that it's a lot more straight forward than I originally thought.

I do have some questions about the profiles.  I think that they'll do what I want.

When using the tv function, I can't line double, but I can when I'm watching a show.  I think that I should be able to make profiles based on the conditions I'm thinking of.

My question is, are there a few profiles available to look at in order to reduce my learning curve?
Logged

6233638

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 5353
Re: MadVR - Help with Choppiness Please
« Reply #8 on: October 18, 2014, 08:02:59 pm »

There are some details on the profiles here: http://forum.doom9.org/showpost.php?p=1271417&postcount=3

Right now, I'm using:

Code: [Select]
if (srcHeight<=360)                      "<SD"
if (srcHeight>360) and (srcHeight<=480)  "NTSC"
if (srcHeight>480) and (srcHeight<=576)  "PAL"
if (srcHeight>576) and (srcHeight<=1080) "HD"
if (srcHeight>1080)                      "UHD"

Though I really need to update that.

I'm guessing you would use a rule based on srcInterlaced to set different scaling quality depending on whether the source it interlaced or not.
Logged

newguy1

  • Recent member
  • *
  • Posts: 47
Re: MadVR - Help with Choppiness Please
« Reply #9 on: October 25, 2014, 06:16:59 pm »

Haven't got to the coding yet, but having fun trying to figure MadVR out!

I'm loving the line doubling by the way, it easily (subjectively) doubles the quality.

What I'm wondering is why my HDHomeRun automatically changes tv to 59.941fps and calls it a movie, any ideas?  I'm guessing that tv should be 30 (or so)fps.
Logged

newguy1

  • Recent member
  • *
  • Posts: 47
Re: MadVR - Help with Choppiness Please
« Reply #10 on: November 16, 2014, 01:11:32 pm »

I was wrong, it is supposed to be at 60fps on some digital tv signals...
Logged
Pages: [1]   Go Up