INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working  (Read 2033 times)

Joeycococo

  • Junior Woodchuck
  • **
  • Posts: 57
DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« on: March 27, 2019, 12:21:51 pm »

I have read through the forums searching on 'DSD5.6' but have not found the answer. I've read the WIKI too.  I have a Benchmark DAC2 which can play up to 192Khz output.  I have no issues playing DSD2.8Mhz files. I am unable to play DSD5.6Mhz files however.  I know I must downsample. I have made changes based on the WIKI articles. I go to Tools- Options - DSP. Here, I adjust the output for any input over 192000hz (so starting at 352800hz) to 176400hz

Input             Output
352,800 hz       176,400 hz
384,000 hz       192,000 hz
705,600 hz       176,400 hz
768,000 hz       192,000 hz
greater than 768,000 hz to 192,000 hz and I have moved this to 176,400 hz too

Nothing is working. Any suggestions would be appreciated.
Logged

Joeycococo

  • Junior Woodchuck
  • **
  • Posts: 57
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #1 on: March 27, 2019, 12:57:15 pm »

BTW, for those wondering why i chose diff out put values for each input value - someone who seems to know JRiver well, told me the output value had to be a multiple of the input value. This is why I alternate the 192000 and 176400hz values.  Although, it did not make sense to me for the final greater than 768000hz setting.
Logged

RD James

  • Citizen of the Universe
  • *****
  • Posts: 1871
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #2 on: March 27, 2019, 01:12:38 pm »

Do you have DSD bitstreaming enabled in the audio settings? You will have to disable that first.
It isn't necessary to use divisors of the source frequency, especially if you enable SoX resampling.
Logged

Joeycococo

  • Junior Woodchuck
  • **
  • Posts: 57
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #3 on: March 27, 2019, 01:27:25 pm »

I'll have to check when I get home but this setting (DSD Bistreaming Enabled) only for DACs that play DSD natively?  My Benchmark is DoP so I'd guess, as I'm able to play DSD2.8Mhz) it is set to DoP.

Logged

RD James

  • Citizen of the Universe
  • *****
  • Posts: 1871
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #4 on: March 27, 2019, 02:38:55 pm »

I'll have to check when I get home but this setting (DSD Bistreaming Enabled) only for DACs that play DSD natively?  My Benchmark is DoP so I'd guess, as I'm able to play DSD2.8Mhz) it is set to DoP.
Bitstreaming can be set to either the DSD or DoP formats, but bitstreaming is an all on/off option in Media Center rather than something which can be set individually by DSD rate.
So if it's enabled for 1xDSD, it's also enabled for higher DSD rates even if your device does not support it.
 
Even if your DAC did support higher DSD rates my recommendation would be to avoid bitstreaming DSD and playing back as PCM anyway. You cannot perform any DSP operations when bitstreaming DSD, including things like Volume Leveling or even regular volume control.
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7828
  • Long cold Winter...
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #5 on: March 27, 2019, 03:12:42 pm »

You can limit DSD bitstreaming to specific DSD rates, anything else beyond the limit is converted to PCM.

Logged
I don't work for JRiver... I help keep the forums safe from "male enhancements" and other sources of sketchy pharmaceuticals.

Windows 11 24H2 Update 64-bit + Ubuntu 24.10 Oracular Oriole 64-bit | Windows 11 24H2 Update 64-bit (Intel N305 Fanless NUC 16GB RAM/500GB M.2 NVMe SSD)
JRiver Media Center 33 (Windows + Linux) | iFi ZEN DAC 3 | JBL 306P MkII Studio Monitors | Audio-Technica ATH-M50x Headphones

RD James

  • Citizen of the Universe
  • *****
  • Posts: 1871
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #6 on: March 27, 2019, 03:15:43 pm »

You can limit DSD bitstreaming to specific DSD rates, anything else beyond the limit is converted to PCM.


Is that option new to MC25?
My recommendation is still to avoid bitstreaming DSD though.
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7828
  • Long cold Winter...
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #7 on: March 27, 2019, 03:25:36 pm »

Nope, it's in MC24 too.
Logged
I don't work for JRiver... I help keep the forums safe from "male enhancements" and other sources of sketchy pharmaceuticals.

Windows 11 24H2 Update 64-bit + Ubuntu 24.10 Oracular Oriole 64-bit | Windows 11 24H2 Update 64-bit (Intel N305 Fanless NUC 16GB RAM/500GB M.2 NVMe SSD)
JRiver Media Center 33 (Windows + Linux) | iFi ZEN DAC 3 | JBL 306P MkII Studio Monitors | Audio-Technica ATH-M50x Headphones

RD James

  • Citizen of the Universe
  • *****
  • Posts: 1871
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #8 on: March 27, 2019, 03:54:16 pm »

Nope, it's in MC24 too.
I must have missed that when it was added. Thanks for pointing it out.
Logged

Joeycococo

  • Junior Woodchuck
  • **
  • Posts: 57
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #9 on: March 27, 2019, 05:46:36 pm »

Is that option new to MC25?
My recommendation is still to avoid bitstreaming DSD though.

From your screen shot i see my settings are all the same except that I don't have SOX checkmarked.  Where do you get that other screen for Bistreaming Formats?
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7828
  • Long cold Winter...
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #10 on: March 28, 2019, 04:24:10 am »

MC's Options > Audio > Bitstreaming option select Custom... and the box will pop up. Select DSD and you'll have the choices.
Logged
I don't work for JRiver... I help keep the forums safe from "male enhancements" and other sources of sketchy pharmaceuticals.

Windows 11 24H2 Update 64-bit + Ubuntu 24.10 Oracular Oriole 64-bit | Windows 11 24H2 Update 64-bit (Intel N305 Fanless NUC 16GB RAM/500GB M.2 NVMe SSD)
JRiver Media Center 33 (Windows + Linux) | iFi ZEN DAC 3 | JBL 306P MkII Studio Monitors | Audio-Technica ATH-M50x Headphones

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3120
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #11 on: March 28, 2019, 07:16:26 am »

It isn't necessary to use divisors of the source frequency, especially if you enable SoX resampling.

I have found that doing non-integer conversions uses significantly more CPU time than integer conversions, even using SoX. Therefore, the integer conversions make sense.
Logged

Joeycococo

  • Junior Woodchuck
  • **
  • Posts: 57
Re: DSD 5.6Mhz Downsampling for Benchmark DAC2 - not working
« Reply #12 on: March 28, 2019, 12:20:36 pm »

Excellent advice.  I made the change to Custom and than chose DSD64 and the files plays.  When I made the change and tried to play, a message popped up possibly telling me to make a change to the output and if I wanted JRiver to make the change automatically and continue on playing the file. I Said 'yes' and the file played.  I than went into the output settings and saw that any input over 192000hz was set to a 176400hz output. 

Now another observation...at the start of the DSD5.6Mhz file, I hear some noise.  It is faint but I do hear it.  Is this dangerous? 
Logged
Pages: [1]   Go Up