Topic: NEW: VST3 Support (Read 28918 times)

Ronjo1 · « **Reply #50 on:** February 18, 2021, 09:10:29 pm »

Hi there, Newbie here.

I did get Waves Studio rack to load (which works as a shell/host that allows waves VST3’s to be selected) – however took me a few goes to be able to play anything without MC27.0.66 crashing.

When I did get it to work, none of the VST controls had any effect - noticed Output format not supported, and now I can’t alter that setting as it crashes all the time now. (i'll keep at it).

I did also notice that I only seemed to be able to select the mono vst’s in Waves Studiorack - no stereo.

Might also try the demo of DDMF Metaplugin,

Thought this might be of interest, Ron

Ronjo1 · « **Reply #51 on:** February 18, 2021, 10:45:49 pm »

Hi again,

Apologies for the blurry screenshots - hopefully these should be better, Ron

JohnY · « **Reply #52 on:** February 27, 2021, 04:04:05 pm »

Hello,
I have a couple of 31 band graphic EQ's (VST3) that I would like to try but am having issues with JRiver crashing when enabling. The first one is the Hornet 31 MK2, and the second one is the waves GEQ. Has anyone had any luck with these? Is there another 31 band graphic EQ that works with JRiver that someone is using?
Thanks for any help!

Matt · « **Reply #53 on:** February 27, 2021, 05:13:09 pm »

Could you email the crashing VST3 to matt at jriver dot com? I'll see if I can figure out why. Thanks.

JohnY · « **Reply #54 on:** February 27, 2021, 06:35:19 pm »

Matt,
I'm getting an error when I try & send you an e-mail.... it's Matt (at) jriver.com, correct?

John

Matt · « **Reply #55 on:** February 27, 2021, 06:49:32 pm »

That's my email. Maybe try uploading the file to some free sharing service?

JohnY · « **Reply #56 on:** February 27, 2021, 06:55:34 pm »

Matt,
Here is the website I downloaded the plugin from, maybe that'll be easier at this point.

https://www.hornetplugins.com/plugins/hornet-thirtyone-mk2/

Matt · « **Reply #57 on:** March 02, 2021, 03:21:44 pm »

Quote from: JohnY on February 27, 2021, 06:55:34 pm

Matt,
Here is the website I downloaded the plugin from, maybe that'll be easier at this point.

https://www.hornetplugins.com/plugins/hornet-thirtyone-mk2/

This plugin:
HoRNet ThirtyOne MK2

Installs the demo fine and works properly in the latest MC27 64-bit.

Sorry, but I'm not sure?

newsposter · « **Reply #58 on:** March 03, 2021, 10:58:42 am »

Is there anything JR can do about VSTs that don't work well on 4k screens?

Does the responsibility for hidpi support belong to the creator of the plugin?

JohnY · « **Reply #59 on:** March 03, 2021, 06:59:54 pm »

Matt,
Thanks for the update. I tried another computer and have some interesting results;

PC #1 - Windows 10 Home - Ver 20H2 - OS build 19042.804 - Experience Pack 120.2212.551.0 - 8 Gb RAM
JRiver ver 27.0.66 (64 - bit)
HoRNetThirtyOne_x64.vst3 file crashes, but the HoRNetThirtyOne_x64.dll file works

PC #2 - Windows 10 Pro - Ver 20H2 - OS build 19042.804 - Experience Pack 120.2212.551.0 - 6 Gb RAM
JRiver ver 27.0.66 (64 - bit)
HoRNetThirtyOne_x64.vst3 file crashes, and the HoRNetThirtyOne_x64.dll file crashes

Both PC's have other VST3's that work, I'm not sure if it has anything to do with this plugin having a spectrum analyzer that may be causing the problem here.

John

Matt · « **Reply #60 on:** March 03, 2021, 07:15:42 pm »

Quote from: JohnY on March 03, 2021, 06:59:54 pm

Matt,
Thanks for the update. I tried another computer and have some interesting results;

PC #1 - Windows 10 Home - Ver 20H2 - OS build 19042.804 - Experience Pack 120.2212.551.0 - 8 Gb RAM
JRiver ver 27.0.66 (64 - bit)
HoRNetThirtyOne_x64.vst3 file crashes, but the HoRNetThirtyOne_x64.dll file works

PC #2 - Windows 10 Pro - Ver 20H2 - OS build 19042.804 - Experience Pack 120.2212.551.0 - 6 Gb RAM
JRiver ver 27.0.66 (64 - bit)
HoRNetThirtyOne_x64.vst3 file crashes, and the HoRNetThirtyOne_x64.dll file crashes

Both PC's have other VST3's that work, I'm not sure if it has anything to do with this plugin having a spectrum analyzer that may be causing the problem here.

John

I'm puzzled because I just tried the VST3 and the DLL and both seem like they're working. No crashes.

Do you get a crash dump you could share after the crash? I'm matt at jriver dot com. Email me the dump and maybe I can see where it's crashing. Be sure to run the most up to date MC before.

Thanks.

JohnY · « **Reply #61 on:** March 03, 2021, 09:23:01 pm »

Matt,
I sent you the dump file from PC #1 (had to set up the registry to get it, took me a while

). Did a check for updates on JRiver and it says up to date. I can set up PC #2 to send you a dump file if you want...

John

Matt · « **Reply #62 on:** March 08, 2021, 02:33:37 pm »

We've now installed this plugin on a couple development computers and neither crash:
https://www.hornetplugins.com/wp-content/demo/HoRNetThirtyOneMK2-2.0.0-demo.zip

Any other ideas? Anyone else?

Thanks.

garysummers · « **Reply #63 on:** March 22, 2021, 11:11:32 pm »

Running Media Center 27 on Windows 10 Pro 64. Utilizing Penteo 16 Pro VST3 plug-in to do the up-mixing duties.
When switching tracks that are a different bit depth and/or sample rate I am getting a pop/click/thump sound.
If I disable the VST3 plug-in all is happy no matter what file I switch to and from. This problem also happens with the older Penteo 5.1 VST3 plug-in.
I would suspect my EVGA/Nu Audio soundcard but with Penteo defeated it switches perfectly.
I have an inquiry to Perfect Surround awaiting their response.
I have messed with the crossfade settings endlessly and it does not seem to change this issue.
Any suggestions greatly appreciated!

EDIT: It appears to happen randomly when even switching within the same bit depth and sample rate!!

All the Best,

Gary

kr4 · « **Reply #64 on:** April 28, 2021, 02:28:25 pm »

When I try to install the DiracLive VST3 plug-in with DSP Studio under a DLNA Server, it fails in two ways.
1. The plug-in is not properly loaded because some of its options do not appear.
2. Playback start is delayed for 10-15 seconds and, when play starts, the plug-in is not in effect ("Current playback doesn't support processing").

It works fine with the regular DSP Studio when using WASAPI/ASIO outputs but I do not have any other VST3 plug-ins to test with.

Has anyone else used them with DLNA?

Matt · « **Reply #65 on:** April 30, 2021, 10:58:27 am »

I just played with Dirac Live over DLNA and it worked.

Make sure that the server is converting to a format that supports DSP Studio, and of course make sure you configure DSP Studio for the server.

Then be sure to associate the renderer with that server.

pschelbert · « **Reply #66 on:** May 01, 2021, 05:28:46 am »

Hi

I am using several VST3 plugins and they work. Great that JRiver now supports VST3!

Peter

kr4 · « **Reply #67 on:** May 03, 2021, 08:54:27 pm »

Thanks. Knowing that, I will apply myself to resolving this next week.

kr4 · « **Reply #68 on:** June 30, 2021, 10:16:14 am »

Quote from: Matt on April 30, 2021, 10:58:27 am

I just played with Dirac Live over DLNA and it worked.

Make sure that the server is converting to a format that supports DSP Studio, and of course make sure you configure DSP Studio for the server.

Then be sure to associate the renderer with that server.

I am still having this problem.
1. Converting all my sources to 7.1 channels, PCM and 192kHz or less.
2. Setting server output to 24bit PCM.
3. Associating the target renderer with that server.
4. Same settings work with ASIO to that same renderer's USB input. Same settings work with DL defeated.
What am I missing?

kr4 · « **Reply #69 on:** July 03, 2021, 10:24:13 am »

Still struggling. Here are the crash and log files. Can someone take a look at these please?

jhermosillo · « **Reply #70 on:** November 17, 2022, 08:14:23 pm »

Hello JRiver team., Installing voxengo marvel GEQ en JRiver 30 is failing to install. both the .vst and .dll. In my previous versions 28 and 29 it worked flawlesly.

What could be causing this. btw, JRiver 28 still intalled in this PC and .vst3 working fine

Jherm

JimH · « **Reply #71 on:** November 17, 2022, 10:31:45 pm »

Try the 32-bit version of MC.

INTERACT FORUM

Author Topic: NEW: VST3 Support (Read 28918 times)