Topic: JRemote (iOS) 3.41 beta (Read 2722 times)

bob · « **on:** August 15, 2023, 08:27:04 pm »

Changes in this build (436):

1) Work around for WakeOnLan not working by using the local network broadcast address when multicast broadcast fails.

Report results please.

bob · « **Reply #1 on:** August 25, 2023, 04:45:46 pm »

Build 437 contains a new iPad feature that will update the cover art in the full screen cover art view on track change.

mattlovell · « **Reply #2 on:** August 26, 2023, 02:18:27 pm »

On both JRemote 3.41 and 3.40, if browsing a set of albums in cover art view, long-pressing an album to start playback then results in the album cover remaining at a reduced size (compared to the neighboring albums) when the cover rotates back to its neutral position. The change in cover art size goes away with a refresh of the view, but one can get multiple albums into that state.

[Edit: wording]

bob · « **Reply #3 on:** August 29, 2023, 11:37:27 am »

Changes for build 438:

Added Opus playback support for the device zone.
Fix for long-pressing an album to start playback resulting in the album cover remaining at a reduced size.

snowman · « **Reply #4 on:** September 26, 2023, 02:56:39 pm »

Sorry if this is not the right place for my issue/inquiry but here it is.

I have several iOS devices running JRemote 3.40. On devices with iOS version 16.7 or above, JRemote won't wake up the computer running JRiver anymore, but if I manually turn on the computer, JRemote will connect though.

There are no issues waking up the computer with JRemote iOS 12.x.x and 15.x.x devices.

I checked the firewall/router and do not see anything abnormal.

Is this an actual issue with 3.40?

Thanks in advance.

bob · « **Reply #5 on:** September 26, 2023, 03:43:15 pm »

Quote from: snowman on September 26, 2023, 02:56:39 pm

Sorry if this is not the right place for my issue/inquiry but here it is.

I have several iOS devices running JRemote 3.40. On devices with iOS version 16.7 or above, JRemote won't wake up the computer running JRiver anymore, but if I manually turn on the computer, JRemote will connect though.

There are no issues waking up the computer with JRemote iOS 12.x.x and 15.x.x devices.

I checked the firewall/router and do not see anything abnormal.

Is this an actual issue with 3.40?

Thanks in advance.

Yes, see the top post in this thread. The fix is in the current beta.

snowman · « **Reply #6 on:** September 26, 2023, 03:56:53 pm »

Thank you. Looking forward for the fix.

bob · « **Reply #7 on:** October 06, 2023, 05:21:05 pm »

New in build 438:

Volume buttons control remote zone volume if selected.

gulp · « **Reply #8 on:** October 13, 2023, 06:25:44 am »

How can I deactivate this? I have constant volume changes since then and it’s a bit annoying, thanks!

snowman · « **Reply #9 on:** October 13, 2023, 07:28:34 am »

If I may ask, how can I try test this beta version? Thanks

bob · « **Reply #10 on:** October 13, 2023, 08:59:33 am »

Quote from: gulp on October 13, 2023, 06:25:44 am

How can I deactivate this? I have constant volume changes since then and it’s a bit annoying, thanks!

Re-install beta build 438 from testflight

bob · « **Reply #11 on:** October 13, 2023, 09:01:36 am »

Quote from: snowman on October 13, 2023, 07:28:34 am

If I may ask, how can I try test this beta version? Thanks

You have mail.

snowman · « **Reply #12 on:** October 13, 2023, 02:15:21 pm »

I can confirm that WOL (w/ JRemote V3.41) is working on a device running iOS 16.7. Good work. Thanks

gulp · « **Reply #13 on:** October 13, 2023, 05:45:31 pm »

Quote from: bob on October 13, 2023, 08:59:33 am

Re-install beta build 438 from testflight

Thanks, that works.
So if you keep this feature I would always have to use an old built? Or do you plan a toggle?

mattlovell · « **Reply #14 on:** October 21, 2023, 08:30:46 am »

I usually keep the volume level of the DLNA renderer through which I play at 100% (adjusting it instead at the pre-amplifier).

With the latest JRemote beta, I notice the initial volume setting changing from run to run. It's never as low as the iPad's volume (which I generally keep quite low), but it certainly is varying from 100%.

Is JRemote trying to "transfer" the iPad's volume level to the DLNA renderer, even though no button presses have occurred?

colourgeek · « **Reply #15 on:** October 22, 2023, 05:44:08 pm »

Quote from: bob on August 15, 2023, 08:27:04 pm

Changes in this build (436):

1) Work around for WakeOnLan not working by using the local network broadcast address when multicast broadcast fails.

Report results please.

Are there openings for beta testers?

bob · « **Reply #16 on:** October 23, 2023, 10:19:31 am »

Changes in build 442:

Volume buttons when changing a remote zone volume no longer affect system volume.

bob · « **Reply #17 on:** October 23, 2023, 10:19:52 am »

Quote from: mattlovell on October 21, 2023, 08:30:46 am

I usually keep the volume level of the DLNA renderer through which I play at 100% (adjusting it instead at the pre-amplifier).

With the latest JRemote beta, I notice the initial volume setting changing from run to run. It's never as low as the iPad's volume (which I generally keep quite low), but it certainly is varying from 100%.

Is JRemote trying to "transfer" the iPad's volume level to the DLNA renderer, even though no button presses have occurred?

Are you using build 442?
There shouldn't be an issue with that one.
Also, make sure optimize volume isn't on in MC for that zone.

mattlovell · « **Reply #18 on:** October 23, 2023, 10:56:16 am »

Quote

Are you using build 442?
There shouldn't be an issue with that one.

Well, not yet.

I'll give it a try when I return home this evening.

Quote

Also, make sure optimize volume isn't on in MC for that zone.

I'll double-check, but I don't think I've ever enabled that (for either the player itself or any zone). Just to clarify, the volume change I'm referring to was for the DLNA renderer itself.

Thanks,
Matt

mattlovell · « **Reply #19 on:** October 24, 2023, 07:28:36 am »

Quote

Are you using build 442?
There shouldn't be an issue with that one.

I was only able to test it briefly last night, but it does seem better. The DLNA renderer's volume was at 100% and remained there.

amsco15 · « **Reply #20 on:** November 12, 2023, 06:27:20 pm »

JRemote should tell you, somewhere, how much time is left in the queue….IMHO.

INTERACT FORUM

Author Topic: JRemote (iOS) 3.41 beta (Read 2722 times)