INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: NEW: Reverse GeoCoding  (Read 3239 times)

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10935
  • Dogs of the world unite!
NEW: Reverse GeoCoding
« on: May 14, 2024, 12:48:49 pm »

Description:

Reverse GeoCoding is a process of obtaining geographical information, i.e. Country, State, City, etc. from an Internet server, using known GPS coordinates.

This feature is now available in Media Center 32.0.46 for images.

Instructions:

  • Optional but recommended.  Go to site https://geocode.maps.co/ and create a free account by clicking the (red) button "Free API Key".  You can choose to upgrade to a paid account later if you so desired, but you probably don't need to.  If you do not create an account, free or otherwise, you will be sharing the same key with other Media Center users.
  • In Standard View, using any image view, select a few image files (not too many, see below) that have data in Latitude and Longitude fields, and right click and choose "Reverse GeoCode".  Note that if the "Reverse GeoCode" menu item does not appear when you right-click, it is because your selection does not contain any files that have [Latitude] and [Longitude] fields filled.  If that is the case, you may try "Update library (from tags)" in case previous importing did not get the fields right.  The bottom-line is, you must have the GPS coordinates in order to use this feature.
  • After you select "Reverse GeoCode" from the menu, Media Center may ask you whether you want to run "Update library (from tags)" because it found deficiencies in your selection.  There are two reasons this can happen, some selected files just don't have [Latitude] and [Longitude] data, or some files have [Latitude] and [Longitude] data that are not precise (they have only integer values for second of angle, for example, 20°13'3"N instead of 20°13'2.78"N).  After clicking the "Yes, update..." button, you should wait for the update to finish, and then try right-click > Reverse GeoCode again.  The update may or may not fix all the deficiencies.  So you may get the prompt again the second time around.  This time you should click "No, don't update..." button.
  • When the process is complete, you should notice that [Country], [State/Province], [City], and [Sublocation] fields are filled, for the files that have valid [Latitude] and [Longitude] data and the server has data for the location.  Some locations will have no results because the server simply does not have any data.  An example would be an image taken on a cruise ship sailing on an ocean in the middle of nowhere.


We obtained an API KEY for Media Center, a free one.  There is a severe restriction on a free key.  They limit requests to ONE PER SECOND.  So, if multiple MC users use the feature at the same time, there is definitely going to be congestion.  If we make too many requests in a short time, the server may reject our requests altogether.   Therefore we recommend you signing up for your own key.

To mitigate this issue, Media Center pauses for 1 second between each requests.  Also, we determine if multiple images have coordinates that are close enough to each other, within a 20 meter x 20 meter box, if so, we do not hit the server again during the same session.

So, here are a couple of things that users can do, to make the process easier:

  • Do not select too many files at one time.
  • DO select images that were taken at the same location into a single batch.  This way we get the data for all of these images with one server request.  So it is very helpful if you sort your list of files by [Latitude] and by [Longitude] before you make your selection.

Additional comments:

Data quality from the server ranges from decent to great, depending on locations.  For example, an image taken somewhere in China may have the City field wrong.  Instead of the correct city name, the server sends a city subdistrict name as city.

Do let MC run "Update Library (from tags)" when prompted, because previously imported images might have latitude and longitude values rounded to the nearest number of seconds of angle, without the fractional part.

Make sure that [Latitude] and [Longitude] tags are not empty and that values are not rounded to nearest number of seconds.

Limit the number of files to 100 or less at a time.  See above for reason.
Logged
Yaobing Deng, JRiver Media Center

marko

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 9151
Re: NEW: Reverse GeoCoding
« Reply #1 on: May 15, 2024, 12:29:58 pm »

Tried a few of these this morning... It worked well...

You do know though, don't you, that virtually nobody will acquaint themselves with the information provided above :D

Will be interesting to see how that pans out...

and, Yaobing, thank you very much for your time on this. Photo stuff is very important, the more that get on board with it, the better :)

I'll go wholesale at some point in the coming week and see how that fares.
For the first time in decades, I might need to rethink my workflow. Currently, all my places tags are kept in a nested "Locations" branch of [Keywords], so, I don't use the [Places] field at all...

This reverse geocode stuff is so simple though, it's brilliant  8)

zybex

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 2642
Re: NEW: Reverse GeoCoding
« Reply #2 on: May 16, 2024, 03:15:39 am »

Yaobing, maybe it's worth it to cache the query results locally with a large expiry time, or a manual "clear cache" option? The coordinates for London tend to stay the same over time.

Edit: Maybe it's already done, or is this only for the current batch?
7. Changed: During Reverse GeoCoding, if the GPS coordinates match (or are close enough) to an already processed image, we use the known data, instead of hitting the server again.

One other option is to allow the user to add its own API key for the service. This would reduce congestion, and some users may want to get a paid key.
Logged

lello

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 561
Re: NEW: Reverse GeoCoding
« Reply #3 on: May 16, 2024, 03:55:04 am »

I selected a photo, right mouse but the Reverse GeoCoding item does not appear in the list: where am I wrong? ?

Obviously first I started Update library (from tags)
Logged

zybex

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 2642
Re: NEW: Reverse GeoCoding
« Reply #4 on: May 16, 2024, 03:57:23 am »

Check if the photo has info in the [Latitude] and [Longitude] tags.
Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10935
  • Dogs of the world unite!
Re: NEW: Reverse GeoCoding
« Reply #5 on: May 16, 2024, 09:15:25 am »

Yaobing, maybe it's worth it to cache the query results locally with a large expiry time, or a manual "clear cache" option? The coordinates for London tend to stay the same over time.

Good idea.

Quote
Edit: Maybe it's already done, or is this only for the current batch?
7. Changed: During Reverse GeoCoding, if the GPS coordinates match (or are close enough) to an already processed image, we use the known data, instead of hitting the server again.
That is for the current batch.

Quote
One other option is to allow the enter to add its own API key for the service. This would reduce congestion, and some users may want to get a paid key.

I have thought about it and will try that too.  Not sure if the server cares about that.  It is called "API KEY", not "User Key".
Logged
Yaobing Deng, JRiver Media Center

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72478
  • Where did I put my teeth?
Re: NEW: Reverse GeoCoding
« Reply #6 on: May 16, 2024, 09:33:12 am »

Logged

Doof

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 5908
  • Farm Animal Stupid
Re: NEW: Reverse GeoCoding
« Reply #7 on: May 18, 2024, 12:36:15 am »

Any reason not to direct users to register for their own API key and have MC use their own instead of a shared key? Even with the one second delay, you run the risk of hitting their limit once this version gets out into the hands of more users. Additionally, it would give users the flexibility of being able to pay for a higher tier key and geocode a higher volume of photos if they need to.
Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10935
  • Dogs of the world unite!
Re: NEW: Reverse GeoCoding
« Reply #8 on: May 19, 2024, 10:48:21 pm »

Any reason not to direct users to register for their own API key and have MC use their own instead of a shared key? Even with the one second delay, you run the risk of hitting their limit once this version gets out into the hands of more users. Additionally, it would give users the flexibility of being able to pay for a higher tier key and geocode a higher volume of photos if they need to.

There is no reason, other than not knowing how the server intends this key to be used.  I am implementing it for the next build.
Logged
Yaobing Deng, JRiver Media Center

darichman

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1362
Re: NEW: Reverse GeoCoding
« Reply #9 on: May 19, 2024, 10:54:47 pm »

Excellent. Thanks so much for incorporating this Yaobing & team :)

I prepared four files and did some testing
1. Has Coordinates, Has Place Tags already
2. Has Coordinates, No Place Tags
3. No coordinates, Has Place Data
4. No coordinates, No Place Data

Currently MC can help me address 1 & 2.

Where existing data is in the Place fields, MC will update/over-write existing entries (as expected)
Overall seems to work very well with a few test files (have not tried in bulk noting the API issues!)
I have not seen any errors, just a few quirks and incosistency with how granular the location data is in Geocode

Agree some fields end up empty. I tagged some from a recent farmstay not far from a major city in Australia lat 153°7'0.27"E  long 27°57'9.93"S
  [Country] Australia
  [State] Queensland
  [City] empty
  [Sublocation] Boyland, Boyland Road

Sublocation: I am not sure how the API handles sublocation queries...
See above, has two entries. I'm guessing we are limited by how data is stored on the geocode site (preference above would be for 'Boyland' to be the City and 'Boyland Road' to be the sublocation.

For a file with lat 27°29'2.12"S & long 153°1'36.66"E
It gives me [Sublocation] South Brisbane,South Brisbane,Stanley Street,Queensland Children's Hospital
   Country = Australia, State = Queensland, City = Brisbane City as expected
All of the entries populated in Sublocation are correct, but it would generally be desired to have a single entry, or to comma delimit them (or even nest them if they are predictably hierarchical)?
I am not sure why  South Brisbane would be duplicated in the above example.
See 'Sublocation Tag.jpeg' attached
Another consequence of this is that there must be a character limit when Lightroom reads the IPTC location field (see truncated value in LR IPTC Fields.jpeg)
Otherwise all Country, State, City, Sublocation visible in LR IPTC as expected

Would you consider using \ as the delimited in [Places] such that it can be nested in views?

Some indicator that the query is occurring could be helpful eg in the status bar Eg 'updating location data file 1/4' etc

I agree with others that I would pay for a user API if this were available. Can sometimes have a thousand photos to tag at a time, not to mention a library of several hundred thousand I may be going back to ;) Don't want to stretch the friendship and get MC banned. And obviously would like longevity and reliability of the service.

Next feature will be 'Add coordinates from Map' to address scenarios 3 & 4 above :)
Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10935
  • Dogs of the world unite!
Re: NEW: Reverse GeoCoding
« Reply #10 on: May 21, 2024, 11:26:59 am »

I updated the instructions.

Users can use their own key.
Data from the server is cached, so the next time you try to run it on an image that is taken at the same or near location, the server will not be involved.
Logged
Yaobing Deng, JRiver Media Center

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10935
  • Dogs of the world unite!
Re: NEW: Reverse GeoCoding
« Reply #11 on: May 21, 2024, 12:22:54 pm »

a major city in Australia lat 153°7'0.27"E  long 27°57'9.93"S
  [Country] Australia
  [State] Queensland
  [City] empty
  [Sublocation] Boyland, Boyland Road

Code: [Select]
<addressparts>
<road>Boyland Road</road>
<city_district>Boyland</city_district>
<municipality>Scenic Rim Regional</municipality>
<state>Queensland</state>
<ISO3166-2-lvl4>AU-QLD</ISO3166-2-lvl4>
<country>Australia</country>
<country_code>au</country_code>
</addressparts>

The data returned has no <city> element.  We try <town> (seen in some of your previously provided sample images), and <village> (common in the US), if we don't find <city>.  Maybe we should also try using <municipality> if City is still empty.


Quote
For a file with lat 27°29'2.12"S & long 153°1'36.66"E
I am not sure why  South Brisbane would be duplicated in the above example.

Code: [Select]
<addressparts>
<amenity>Queensland Children&#039;s Hospital</amenity>
<house_number>501</house_number>
<road>Stanley Street</road>
<suburb>South Brisbane</suburb>
<city_district>South Brisbane</city_district>
<city>Brisbane City</city>
<state>Queensland</state>
<ISO3166-2-lvl4>AU-QLD</ISO3166-2-lvl4>
<postcode>4101</postcode>
<country>Australia</country>
<country_code>au</country_code>
</addressparts>

Here "South Brisbane" appears both as a <city_district> and a <suburb>.  Not sure how we should handle this.  Only use one?  Or don't use duplicate?

Quote

Would you consider using \ as the delimited in [Places] such that it can be nested in views?

[Places] is comma-delimited and that was not my decision (it has been like that for a long time).  I don't have a preference but I don't know if there was an initial reason for it.

[Sublocation] is delimited the same way.

Quote
Some indicator that the query is occurring could be helpful eg in the status bar Eg 'updating location data file 1/4' etc

Maybe.

Quote
I agree with others that I would pay for a user API if this were available. Can sometimes have a thousand photos to tag at a time, not to mention a library of several hundred thousand I may be going back to ;) Don't want to stretch the friendship and get MC banned. And obviously would like longevity and reliability of the service.

Update MC to build 48.  You can use your own key.

Quote
Next feature will be 'Add coordinates from Map' to address scenarios 3 & 4 above :)

That seems to be more challenging.  We will see about that.
Logged
Yaobing Deng, JRiver Media Center

darichman

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1362
Re: NEW: Reverse GeoCoding
« Reply #12 on: May 23, 2024, 06:29:28 pm »

Quote
Changed: Reverse Geocoding will use "municipality" for [City] field, if other elements ("city", "town", or "village") are not found.

Sounds good. I hadn't realised they had such granular breakdown. In my 'Boyland' example, the Scenic Rim regional information would have been very useful, so agree with this.

Propose: [City] amalgamates municipality, city, town, village in the form Municipality\City\Town\Village ?
If any empty, they are ignored. If any identical, they are not duplicated? Would this be doable?
This ensures all useful permutations of the info is available, and also nested with the highest 'region' information (below state/province) captured, and ability to expand to smaller areas.

How are you handling sublocation? I can see various fields of 'Street', 'suburb', 'amenity' etc

Could we agree on the hierarchical structure of these? With some fields consolidated in a [City] hierarchy (like above) and others in a[Sublocation] hierarchy.
The broader [Places] could either be a non-hierachical ; delimited list (ie no nesting or groupings)
....or a full [Country]\[State]\[City - Municipality\City\City district\Town\Village]\[Sublocation - Suburb\Road\Amenity\]

Any thoughts from others?

Sorry Marko, this won't line up with your nested keywords approach, but the with magic of MC expressions I'm sure you can migrate (in either direction) as you desire ;)
Logged

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10935
  • Dogs of the world unite!
Re: NEW: Reverse GeoCoding
« Reply #13 on: May 28, 2024, 09:51:36 am »

Propose: [City] amalgamates municipality, city, town, village in the form Municipality\City\Town\Village ?
If any empty, they are ignored. If any identical, they are not duplicated? Would this be doable?
This ensures all useful permutations of the info is available, and also nested with the highest 'region' information (below state/province) captured, and ability to expand to smaller areas.

This is interesting.  I am not sure if our users have already any fixed ideas about this field.  In the US, an address is almost always in the form of "### StreetName, CityName, StateName, PostalCode", where the StateName is the two letter abbreviation, while "CityName" can be a city (like Chicago), or a village, like Homewood.  It seems that the county and township names are always ignored.  No one pays any attention to them except at tax-paying time  ;D

That is why I initially ignored <municipality>, as it is used to return Township name in my home location.

I would like other users to chime in on this.


Quote
How are you handling sublocation? I can see various fields of 'Street', 'suburb', 'amenity' etc

Could we agree on the hierarchical structure of these? With some fields consolidated in a [City] hierarchy (like above) and others in a[Sublocation] hierarchy.

This is the part that involved some guesswork by me and in need of more refinement.  We can try agreeing on some basic format.

Right now, [Sublocation] will contain most entries below [City].  For a rural location, there are not a lot.  Below <village>, I have seen <hamlet> for my home (which I didn't even knew we had) and <residential> for other locations, and then <road>, and <house_number>.  We ignore <house_number>.  So for my home location, [Sublocation] will contain "HamletName, StreetName", but for larger cities, we might have <city_district>, and other levels.  For example, a picture taken on University of Chicago campus has the following data:

Code: [Select]
<?xml version="1.0" encoding="UTF-8" ?>
<reversegeocode timestamp='Tue, 28 May 24 14:08:06 +0000' attribution='Data © OpenStreetMap contributors, ODbL 1.0. http://www.openstreetmap.org/copyright' querystring='lat=41.7894749999999959&amp;lon=-87.5985000000000014&amp;api_key=664cb89f83401276276823uenaed537&amp;format=xml'>
<result place_id="330249619" osm_type="relation" osm_id="13117436" ref="The University of Chicago" lat="41.79139685" lon="-87.60084387193544" boundingbox="41.7877878,41.7949773,-87.6061459,-87.5894438" place_rank='30' address_rank='30'>
The University of Chicago, 5801, South Ellis Avenue, Hyde Park, Chicago, Hyde Park Township, Cook County, Illinois, 60637, United States
</result>

<addressparts>

<amenity>The University of Chicago</amenity>
<house_number>5801</house_number>
<road>South Ellis Avenue</road>
<quarter>Hyde Park</quarter>
<city>Chicago</city>
<municipality>Hyde Park Township</municipality>
<county>Cook County</county>
<state>Illinois</state>
<ISO3166-2-lvl4>US-IL</ISO3166-2-lvl4>
<postcode>60637</postcode>
<country>United States</country>
<country_code>us</country_code>
</addressparts>

</reversegeocode>

Here <municipality> "Hyde Park Township" is just a sub-district of the city of Chicago.  "Hyde Park Township" probably coincides with <quarter> "Hyde Park", which I had not included, and should include in [Sublocation].

<amenity>/<tourism>/<leisure>/<building>/<commercial> (usually only one of these) can be thought of as the "place of interest", and is included as the last level of [Sublocation], below <road> (Street).

Quote
The broader [Places] could either be a non-hierachical ; delimited list (ie no nesting or groupings)
....or a full [Country]\[State]\[City - Municipality\City\City district\Town\Village]\[Sublocation - Suburb\Road\Amenity\]

Any thoughts from others?

We should talk more about this.  I just followed previous code of combining Country, State, City, and added Sublocation after that.
Logged
Yaobing Deng, JRiver Media Center

zybex

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 2642
Re: NEW: Reverse GeoCoding
« Reply #14 on: May 28, 2024, 10:34:33 am »

Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72478
  • Where did I put my teeth?
Re: NEW: Reverse GeoCoding
« Reply #15 on: May 28, 2024, 11:43:59 am »

Programmers don't exist anymore.  They're developers now.  If I were either though, I'd want to give up after reading that.
Logged

zybex

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 2642
Re: NEW: Reverse GeoCoding
« Reply #16 on: May 28, 2024, 11:57:39 am »

But I thought developers built houses?
Logged

darichman

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1362
Re: NEW: Reverse GeoCoding
« Reply #17 on: July 21, 2024, 11:49:21 pm »

Hi team

Sorry it's been a few weeks. Time flies! I guess I'm spending more time taking photos of the kids than tagging photos these days.
So always looking for ways to simplify and cut down time it takes to have it all scanned & catalogued.

Happy to talk more Yaobing (and others). I have been testing on a bunch of files taken in various places (in v33.0.4)

Have you given any more thought to nesting the entries (with \) instead of commas?
Currently, the [Sublocation] entries pulled on geocoding end up looking messy, separated with commas and no spaces (see Comma separated value jpg examples attached)
Propose: MC nests all fields mapped to [City] and [Sublocation] fields hierarchically, and eliminates duplicate entries...
    eg Tends to pull 'South Brisbane,South Brisbane,Stanley St,Queensland Children's Hospital'
    This could be South Brisbane\Stanley St\Queensland Children's Hospital

I note that I have a [Places] field, that appears to be a default field. It seems to populate with entries like:
   Australia,Queensland,Gold Coast City,Hope Island,Boykambil Esplanade South based on the individual [Country], [State] etc fields
Is this simply updated when the primary location fields are entered? I note that it's editable... what's the intention of the this field exactly?
But again, why not repurpose this with \ as a delimiter, so you can expand and click at each level? This would be great to use in panes to filter views by broad or specific locations
See the examples Places (Current).jpg - Places (Proposed).jpg
   I haven't retagged all that many with the \ syntax yet, but you can see how useful/powerful this will get when many photos are tagged with location data.
Logged

john_kane

  • Junior Woodchuck
  • **
  • Posts: 69
Re: NEW: Reverse GeoCoding
« Reply #18 on: August 11, 2024, 03:02:19 pm »

I'm late to the party, but I second the "/" separator and hierarchy approach.

I actually have this implemented somewhat from my legacy workflow and tagging, which supported hierarchical tags.

So my places are tag coded like:

Places/USA/Pennsylvania/Philadelphia/Constitution Center

And then in Slideshow mode I have some complicated expressions to parse that hierarchy into a readable location address and store it in the Caption field... which I display for my photos in slideshow mode.

If MC adopts the / hierarchy I could simplify and convert all that legacy stuff over.


Logged

darichman

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1362
Re: NEW: Reverse GeoCoding
« Reply #19 on: August 21, 2024, 05:38:41 am »

Image handling may not be as sexy as video and audio, but MC does a fine job of it and there are a lot of interested, knowledgeable and talented people on here  :)
Logged
Pages: [1]   Go Up