Topic: Un français en galere (Read 935 times)

trodesson · « **on:** February 06, 2025, 11:44:18 am »

Bonjour, JE suis un vieil (68 ans) et ancien (depuis la version 17) utilisateur de J River et J Remote (je ne suis pas un geek). Depuis un bon moment, je n'arrive plus à utiliser J Remote, car je pense que je ne me rappelle mon nom d'utilisateur ni de mon mot de passe. Merci de me dire comment recréer un compte
Hello I am an old (68 years) and former (since version 17) french user of J River and J remote (I am not a geek) For a long time I can not use J Remote because I think I can not remember my username and password. Please tell me how to recreate an account.

JimH · « **Reply #1 on:** February 06, 2025, 11:53:16 am »

Vous pouvez regarder votre nom dans Media Network settings.

Si vous ne pouvez pas rappeler votre password, fermer Media Network et intialisez encore.

trodesson · « **Reply #2 on:** February 06, 2025, 05:53:58 pm »

Media Network ? What is it ? And is where ?

JimH · « **Reply #3 on:** February 07, 2025, 01:49:39 am »

On the wiki.

A Google search also can find it if you add "JRiver"

trodesson · « **Reply #4 on:** February 07, 2025, 10:42:16 am »

ok I found it! What should I do? Answer me in English (I'll do the translation if needed)

JimH · « **Reply #5 on:** February 07, 2025, 11:18:31 am »

Tools > Options > Media Network

Disable and re-enable. You will get a new Access Key.

Look at Authentication in the same place.

trodesson · « **Reply #6 on:** February 09, 2025, 07:47:48 am »

Ok So I did find my access code but I can't remember my username or password.

Awesome Donkey · « **Reply #7 on:** February 09, 2025, 07:53:42 am »

You can change it in the Media Network settings, under Access Key there's a Authentication checkbox. Uncheck it, re-check it and put in a new username and password and there you go.

trodesson · « **Reply #8 on:** February 09, 2025, 01:00:51 pm »

No it does NOT work, I did all these manipulations: the system asks me for a password and an identifier ? ? I change identifier and password (3 letters) and finally I have a new access code the identifier has changed but probably not the password (I have 5 small dots instead of “3”) And I still can not use J remote (that I have already used, I found very practical, and I wanted to advise a friend) with my cell phone.

Translated with www.DeepL.com/Translator (free version)

JimH · « **Reply #9 on:** February 09, 2025, 01:55:43 pm »

Did you read the wiki?
https://wiki.jriver.com/index.php/Media_Network
https://wiki.jriver.com/index.php/Access_Key
https://wiki.jriver.com/index.php/Media_Server

Turn off Authentication. Then no login and password are required.

trodesson · « **Reply #10 on:** **Yesterday** at 01:56:20 am »

Ok and thank you for your help. So if I disable authentication, I should be able to connect just by entering the access code on the j remote app on my cell phone? No it doesn't work

JimH · « **Reply #11 on:** **Yesterday** at 03:11:19 am »

Read Network Access on the wiki.

Awesome Donkey · « **Reply #12 on:** **Yesterday** at 05:49:27 am »

You're not trying to log into Cloudplay or something like that, right? You might need to post a screenshot of the login window (without any information put in).

trodesson · « **Reply #13 on:** **Yesterday** at 09:43:19 am »

I'm trying to connect to j river from my smartphone (samsung A40) and via j remote 2 . I do: add server → accesskey → I type in my access code (and nothing else because I unchecked autentication) → connect → the phone searches then replies: unable to connect to server

Awesome Donkey · « **Reply #14 on:** **Yesterday** at 09:47:08 am »

You are connected with your Samsung A40 within the same local network via Wi-Fi that the computer acting as the server JRiver is running on, correct? Trying to connect outside of your local network (e.g. via mobile data) can be tricky and requires you to forward ports on your router and requires your ISP to allow port forwarding.

For best results with JRemote or any remote for that matter, it's best to use the device you're running JRemote on and the device running Media Center in the same local network together. Don't use mobile data or anything like that, it's not going to work without deeper configuration.

trodesson · « **Reply #15 on:** **Yesterday** at 10:20:43 am »

Yes, I have a local network on which is my computer which has JRiver (connected to my PS audio via bridge). I also tried to test my connectivity from my computer and indeed: “this library server is not reachable from the internet....”.

trodesson · « **Reply #16 on:** **Yesterday** at 10:35:19 am »

Capture

Awesome Donkey · « **Reply #17 on:** **Yesterday** at 10:43:12 am »

Quote from: trodesson on Yesterday at 10:20:43 am

Yes, I have a local network on which is my computer which has J River (connected to my PS audio via bridge). I also tried to test my connectivity from my computer and indeed: “this library server is not reachable from the internet....”.

You may need to forward port 52199 on your router.

JimH · « **Reply #18 on:** **Yesterday** at 11:00:57 am »

Quote from: trodesson on Yesterday at 10:20:43 am

Yes, I have a local network on which is my computer which has JRiver (connected to my PS audio via bridge). I also tried to test my connectivity from my computer and indeed: “this library server is not reachable from the internet....”.

It isn't clear what you want to do.

Are you just using MC on your local network and controlling it with JRemote? In that case, re-read the wiki topic on Media Network. You don't need to configure port forwarding.

Awesome Donkey · « **Reply #19 on:** **Yesterday** at 11:18:20 am »

That's true, you can use the local IP address of the device MC is running on instead of the Access Key.

Thinking about it, maybe that Information dialog can be improved? If perhaps the internet is not reachable (likely firewall if I had to guess), it could display the local IP address of the device MC is running on so it could be used instead?

trodesson · « **Reply #20 on:** **Yesterday** at 11:22:22 am »

I just tried to go through IP address I entered my IP and port 52199 with always the same negative result. It's getting complicated ....

trodesson · « **Reply #21 on:** **Yesterday** at 11:25:42 am »

Quote from: Awesome Donkey on Yesterday at 11:18:20 am

That's true, you can use the local IP address of the device MC is running on instead of the Access Key.

Thinking about it, maybe that Information dialog can be improved? If perhaps the internet is not reachable (likely firewall if I had to guess), it could display the local IP address of the device MC is running on so it could be used instead?

I'm trying (as I already have) to control MC with J Remote rather than with my computer's keyboard and mouse.

Awesome Donkey · « **Reply #22 on:** **Yesterday** at 11:26:41 am »

Make sure it's the local IP address assigned to the computer Media Center is running on. It's not your IP address assigned by your ISP, that won't work without port forwarding. Local IP addresses typically start with 192.168...

trodesson · « **Reply #23 on:** **Yesterday** at 11:38:13 am »

I looked for the IP as explained in the WIKI (I did the 2 suggested manipulations) and I got the same IP starting with 178 (not good then). How can I obtain the IP address assigned to the computer Media Center is running on?

Awesome Donkey · « **Reply #24 on:** **Yesterday** at 11:39:22 am »

For Windows or macOS: https://www.avast.com/c-how-to-find-ip-address

JimH · « **Reply #25 on:** **Yesterday** at 11:52:16 am »

Quote from: Awesome Donkey on Yesterday at 11:39:22 am

For Windows or macOS: https://www.avast.com/c-how-to-find-ip-address

whatsmyip

Awesome Donkey · « **Reply #26 on:** **Yesterday** at 12:02:53 pm »

Sites like whatsmyip only gives you your WAN or public IP address, not the LAN or local IP address of the device itself (either given to the device from the router via DHCP, address reservation or manually set by the user) which in this case is needed. Using the public IP address would require port forwarding to be used on the router and for the ISP to support port forwarding whereas using the local IP address as long as it's on the same network should work (and no port forwarding needed).

trodesson · « **Reply #27 on:** **Yesterday** at 12:05:27 pm »

I did the manipulations recommended by microsoft to find the IP of my computer and I got 2 IPs starting with 192. I tried both with no results.
We agree: as I've deactivated authentication, I don't need a password or username ?

trodesson · « **Reply #28 on:** **Today** at 04:37:39 am »

Hello everyone! It still doesn't work. Can you confirm that my setting is correct for what I want to do: control MC pas J Remote installed on my smartphone. In my opinion: NO

INTERACT FORUM

Author Topic: Un français en galere (Read 935 times)