INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: TV access now reports audio filter issue  (Read 3548 times)

curiousMonkey

  • Galactic Citizen
  • ****
  • Posts: 287
TV access now reports audio filter issue
« on: July 07, 2013, 02:39:08 pm »
I just tried to watch a live tv program after recording various shows in the last few days.
The screen stays black and eventually reports "Invalid audio decoder or output pin"
I tried switching from WASAPI to direct mode but that did not help.
Audio files work just fine in either mode.

I have video mode set to Red October standard.

Is it possible to watch a program while it is still recording ?

I have a program being recorded but I just see a black screen and a time length of 0:00.
There are multiple CNK files in the directory so I assume the recording process is working.
This may just be another scenario where the TV playing issue is the culprit.
Logged
HTPC - Windows 11 64-bit Minisforum MS-01

JVC NX7, Panamorph Paladin DCR, Stewart ST130 G4 140" 2.4:1, Anthem AVM 70, Aerial Acoustics 7T/7CC/10T, Rythmik F18 (2),  Sony UBP-X800 Mk2

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: TV access now reports audio filter issue
« Reply #1 on: July 07, 2013, 02:52:31 pm »
Quote from: curiousMonkey on July 07, 2013, 02:39:08 pm
Is it possible to watch a program while it is still recording ?

Yes.

Quote
I have a program being recorded but I just see a black screen and a time length of 0:00.
There are multiple CNK files in the directory so I assume the recording process is working.
This may just be another scenario where the TV playing issue is the culprit.

The CNK files are part of recordings. They should not be messed with in anyway.
Logged
Yaobing Deng, JRiver Media Center

curiousMonkey

  • Galactic Citizen
  • ****
  • Posts: 287
Re: TV access now reports audio filter issue
« Reply #2 on: July 07, 2013, 03:05:04 pm »
Do you have any suggestions about settings that may need to changed if I want to fix this problem?

I don't think I changed anything but I may have inadvertently caused this when I was forced to reinstall MC.
I am pretty sure I made recordings are the last reinstall.
Logged
HTPC - Windows 11 64-bit Minisforum MS-01

JVC NX7, Panamorph Paladin DCR, Stewart ST130 G4 140" 2.4:1, Anthem AVM 70, Aerial Acoustics 7T/7CC/10T, Rythmik F18 (2),  Sony UBP-X800 Mk2

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: TV access now reports audio filter issue
« Reply #3 on: July 07, 2013, 05:58:25 pm »
What is the tuner (make and model) that you used to record the show?

Were you able to watch the same channel before you recorded it?  If so, are you still able to watch it live?
Logged
Yaobing Deng, JRiver Media Center

curiousMonkey

  • Galactic Citizen
  • ****
  • Posts: 287
Re: TV access now reports audio filter issue
« Reply #4 on: July 07, 2013, 06:47:27 pm »
I am using the HDHomerun and I thought it was working fine.
Nothing is working via MC now but of course the turner still works fine with WMC.

I did notice a problem with YouTube video via Chrome; the audio was all garbled after I started playing with MC to try and resolve this issue. But that problem has now been solved.
Logged
HTPC - Windows 11 64-bit Minisforum MS-01

JVC NX7, Panamorph Paladin DCR, Stewart ST130 G4 140" 2.4:1, Anthem AVM 70, Aerial Acoustics 7T/7CC/10T, Rythmik F18 (2),  Sony UBP-X800 Mk2

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: TV access now reports audio filter issue
« Reply #5 on: July 07, 2013, 07:01:58 pm »
Since you do see the .CNK files, along with other files in the folder of recording, recording probably works, and the problem maybe with playback part.  In particular, maybe the audio settings is incorrect.

Please try make a very short recording (around 10 seconds, i.e. stop recording a few seconds after you start it).  Zip up the entire folder of the recording and email it to me.  yaobing at jriver dot com

If I can play it, then we will concentrate on playback problem.
Logged
Yaobing Deng, JRiver Media Center

curiousMonkey

  • Galactic Citizen
  • ****
  • Posts: 287
Re: TV access now reports audio filter issue
« Reply #6 on: July 07, 2013, 07:22:11 pm »
I will work on that recording for you.

Here is a snippet from the log file where I tried to play the recordings.
Code: [Select]

2614514: 2412: TV: CTSFileReader::GetByteOffsets: AccessIndex returned 0x0.
2614514: 2412: TV: CTSFileReader::GetByteOffsets: Audio FilePointer(92880)
2614514: 2412: TV: CTSFileReader::GetByteOffsets: Finish (31 ms)
2614514: 2412: TV: CTSFileReader::SeekToFirstSample: Finish (62 ms)
2614514: 2412: TV: CTSFileReader::ReadHeaders: Finish (140 ms)
2614514: 2412: TV: 0x96c DisplayTypeEx: TS Audio format  M type MEDIATYPE_Audio  S type MEDIASUBTYPE_DOLBY_AC3
2614514: 2412: TV: 0x96c DisplayTypeEx: Subtype description UNKNOWN
2614514: 2412: TV: 0x96c DisplayTypeEx: Not temporally compressed
2614514: 2412: TV: 0x96c DisplayTypeEx: Sample size 65536
2614514: 2412: TV: 0x96c DisplayTypeEx:      Format type FORMAT_WaveFormatEx
2614514: 2412: TV: 0x96c DisplayTypeEx:      Subtype MEDIASUBTYPE_DOLBY_AC3
2614514: 2412: TV: 0x96c DisplayTypeEx: wFormatTag 0
2614514: 2412: TV: 0x96c DisplayTypeEx: nChannels 2
2614514: 2412: TV: 0x96c DisplayTypeEx: nSamplesPerSec 48000
2614514: 2412: TV: 0x96c DisplayTypeEx: nAvgBytesPerSec 0
2614514: 2412: TV: 0x96c DisplayTypeEx: nBlockAlign 0
2614514: 2412: TV: 0x96c DisplayTypeEx: wBitsPerSample 16
2614514: 2412: TV: 0x96c DisplayTypeEx: cbSize 0
2614514: 2412: TV: 0x96c DisplayTypeEx: TS Video format  M type MEDIATYPE_Video  S type MEDIASUBTYPE_MPEG2_VIDEO
2614514: 2412: TV: 0x96c DisplayTypeEx: Subtype description UNKNOWN
2614514: 2412: TV: 0x96c DisplayTypeEx: Not temporally compressed
2614514: 2412: TV: 0x96c DisplayTypeEx: Sample size 1
2614514: 2412: TV: 0x96c DisplayTypeEx: [MPEG2VideoInfo]:
2614514: 2412: TV: 0x96c DisplayTypeEx: dwStartTimeCode 13117376
2614514: 2412: TV: 0x96c DisplayTypeEx: cbSequenceHeader 0
2614514: 2412: TV: 0x96c DisplayTypeEx: dwProfile 0
2614514: 2412: TV: 0x96c DisplayTypeEx: dwLevel 0
2614514: 2412: TV: 0x96c DisplayTypeEx: dwFlags 0
2614514: 2412: TV: 0x96c DisplayTypeEx: [MPEG2VideoInfo]-[VIDIOINFOHEADER2]:
2614514: 2412: TV: 0x96c DisplayTypeEx: Source rectangle (Left 0 Top 0 Right 704 Bottom 480)
2614514: 2412: TV: 0x96c DisplayTypeEx: Target rectangle (Left 0 Top 0 Right 0 Bottom 0)
2614514: 2412: TV: 0x96c DisplayTypeEx: dwBitRate 12000000
2614514: 2412: TV: 0x96c DisplayTypeEx: dwBitErrorRate 0
2614514: 2412: TV: 0x96c DisplayTypeEx: AvgTimePerFrame 166833
2614514: 2412: TV: 0x96c DisplayTypeEx: dwInterlaceFlags 0
2614514: 2412: TV: 0x96c DisplayTypeEx: dwCopyProtectFlags 0
2614514: 2412: TV: 0x96c DisplayTypeEx: dwPictAspectRatioX 0
2614514: 2412: TV: 0x96c DisplayTypeEx: dwPictAspectRatioY 0
2614514: 2412: TV: 0x96c DisplayTypeEx: dwControlFlags 0
2614514: 2412: TV: 0x96c DisplayTypeEx: [MPEG2VideoInfo]-[VIDIOINFOHEADER2]-[BITMAPINFOHEADER]:
2614514: 2412: TV: 0x96c DisplayTypeEx: Size of BITMAPINFO structure 40
2614514: 2412: TV: 0x96c DisplayTypeEx: 704x480x0 bit  (0)
2614514: 2412: TV: 0x96c DisplayTypeEx: Image size 0
2614514: 2412: TV: 0x96c DisplayTypeEx: Planes 0
2614514: 2412: TV: 0x96c DisplayTypeEx: X Pels per metre 2000
2614514: 2412: TV: 0x96c DisplayTypeEx: Y Pels per metre 55362
2614514: 2412: TV: 0x96c DisplayTypeEx: Colours used 0
2614514: 2412: TV: CTSFileReader::CacheMediaDurations: Audio duration 500 ms, video duration 16 ms
2614514: 2412: TV: CTSFileReader::OpenFiles: Finish (187 ms)
2614514: 2412: TV: CJRTVReaderFilter::Load: CTSFileReader::Open returned 0x0
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Releasing fitler state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Releasing fitler state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Start
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Releasing filter state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Finish (0 ms)
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Releasing fitler state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Start
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Releasing filter state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Finish (0 ms)
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Releasing fitler state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Start
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Releasing filter state lock
2614514: 2412: TV: CJRTVVideoOutPin::GetMediaType: Finish (0 ms)
2614514: 2412: Playback: DShowVideoGraph::ConnectSourceAndSplitter: Finish (187 ms)
2614514: 2412: Playback: CStreamSelectionList::FindStreams: Start
2614514: 2412: Playback: CStreamSelectionList::FindStreams: IStreamSelect interface not found
2614514: 2412: Playback: CStreamSelectionList::FindStreams: Finish (0 ms)
2614514: 2412: Playback: DShowVideoGraph::ConnectDecoders: Start
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Releasing fitler state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Getting filter state lock
2614514: 2412: TV: CJRTVAudioOutPin::GetMediaType: Releasing fitler state lock
2614514: 2412: TV: CJRTVAudioOutPin::DecideBufferSize: Getting filter state lock
2614514: 2412: TV: CJRTVAudioOutPin::DecideBufferSize: Audio Pin: requesting buffer size 192000.
2614514: 2412: TV: CJRTVAudioOutPin::DecideBufferSize: Releasing filter state lock
2614514: 2412: Playback: DShowVideoGraph::ConnectAudioDecoder: Start
2614514: 2412: Playback: DShowVideoGraph::ConnectAudioDecoder: Added LAV audio decoder: 00000000
2614514: 2412: Playback: DShowVideoGraph::ConnectDecoder: Start
2614514: 2412: Playback: DShowVideoGraph::ConnectDecoder: Output pin 1: 0019AE54; Output pin 2: 00000000; Decoder: 00000000; Media type: Audio
2614514: 2412: Playback: DShowVideoGraph::ConnectDecoder: Invalid Audio decoder filter or output pin.
2614514: 2412: Playback: DShowVideoGraph::ConnectDecoder: Finish (0 ms)
2614514: 2412: Playback: DShowVideoGraph::ConnectAudioDecoder: Finish (0 ms)
2614514: 2412: Playback: DShowVideoGraph::ConnectDecoders: Failed connecting audio decoder.
2614514: 2412: Playback: DShowVideoGraph::ConnectDecoders: Finish (0 ms)
2614514: 2412: Playback: DShowVideoGraph::Render: Rendering success: 0
2614514: 2412: Playback: DShowVideoGraph::Render: Finish (187 ms)
2614514: 2412: Playback: CDXPlayerWindow::Load: Invalid Audio decoder filter or output pin.
2614514: 2412: Playback: CPlayerZone::JRPlaybackEngine_PlaybackError: Start
2614514: 2412: Playback: CPlayerZone::JRPlaybackEngine_PlaybackError: Error: Invalid Audio decoder filter or output pin.
2614514: 2412: Playback: CPlayerZone::JRPlaybackEngine_PlaybackError: Finish (0 ms)
2614514: 2412: Playback: CDXPlayerWindow::Load: Finish (187 ms)
2614514: 2412: Playback: CPlayerZone::JRPlaybackEngine_PlaybackError: Start
2614514: 2412: Playback: CPlayerZone::JRPlaybackEngine_PlaybackError: Error: Invalid Audio decoder filter or output pin.
2614514: 2412: Playback: CPlayerZone::JRPlaybackEngine_PlaybackError: Finish (0 ms)
2614514: 2412: Playback: CPlayerZone::JRPlaybackEngine_EndOfFile: Start
2614514: 2412: Playback: CPlayerZone::PlayNextFile: bCanPlayNext=0, m_bPlaybackError=1
[/code
Logged
HTPC - Windows 11 64-bit Minisforum MS-01

JVC NX7, Panamorph Paladin DCR, Stewart ST130 G4 140" 2.4:1, Anthem AVM 70, Aerial Acoustics 7T/7CC/10T, Rythmik F18 (2),  Sony UBP-X800 Mk2

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: TV access now reports audio filter issue
« Reply #7 on: July 08, 2013, 08:23:33 am »
Your sample recording works fine.

The log you posted shows that MC did not load LAV filters properly.  Did the computer have internet connection at the time you ran it?  MC needs to download some DirectShow filters.
Logged
Yaobing Deng, JRiver Media Center

curiousMonkey

  • Galactic Citizen
  • ****
  • Posts: 287
Re: TV access now reports audio filter issue
« Reply #8 on: July 08, 2013, 12:58:54 pm »
I think Internet access is always available on that system.
I know that I had no browser issues while I was debugging the problem.
Logged
HTPC - Windows 11 64-bit Minisforum MS-01

JVC NX7, Panamorph Paladin DCR, Stewart ST130 G4 140" 2.4:1, Anthem AVM 70, Aerial Acoustics 7T/7CC/10T, Rythmik F18 (2),  Sony UBP-X800 Mk2

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: TV access now reports audio filter issue
« Reply #9 on: July 08, 2013, 01:13:36 pm »
Check folder "C:\Users\[your user name]\AppData\Roaming\J River\Media Center 18\Plugins\", do you see a "lav" subfolder with lav files (especially LAVAudio.ax)?

Are you able to play other video files (such as MPEG-2 video)?
Logged
Yaobing Deng, JRiver Media Center

curiousMonkey

  • Galactic Citizen
  • ****
  • Posts: 287
Re: TV access now reports audio filter issue
« Reply #10 on: July 08, 2013, 01:28:58 pm »
Yes I can see files in the lav directory, including lavAudio.ax.

MPEG-2 files do not play either. They report "A problem with playback".
Logged
HTPC - Windows 11 64-bit Minisforum MS-01

JVC NX7, Panamorph Paladin DCR, Stewart ST130 G4 140" 2.4:1, Anthem AVM 70, Aerial Acoustics 7T/7CC/10T, Rythmik F18 (2),  Sony UBP-X800 Mk2

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: TV access now reports audio filter issue
« Reply #11 on: July 08, 2013, 02:29:42 pm »
Quote from: curiousMonkey on July 08, 2013, 01:28:58 pm
Yes I can see files in the lav directory, including lavAudio.ax.

MPEG-2 files do not play either. They report "A problem with playback".

Please try renaming the lav folder to lav-save, and try playing a video file.  MC should attempt to download lav.  If MC successfully downloads lav, you can delete lav-save folder.
Logged
Yaobing Deng, JRiver Media Center

curiousMonkey

  • Galactic Citizen
  • ****
  • Posts: 287
Re: TV access now reports audio filter issue
« Reply #12 on: July 08, 2013, 06:33:57 pm »
That seems to be working  :)

I saw the message on the screen about downloading components.
After a short delay the file started playing.
I had to fix a problem with the bitstreaming setting, which I believe was added when I started playing around with settings as I tried to solve this problem.

My current settings are: WASAPI, non-event (old hardware), bitstreaming (HDMI)
Logged
HTPC - Windows 11 64-bit Minisforum MS-01

JVC NX7, Panamorph Paladin DCR, Stewart ST130 G4 140" 2.4:1, Anthem AVM 70, Aerial Acoustics 7T/7CC/10T, Rythmik F18 (2),  Sony UBP-X800 Mk2

Yaobing

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10926
  • Dogs of the world unite!
Re: TV access now reports audio filter issue
« Reply #13 on: July 08, 2013, 08:34:17 pm »
So you can play your TV recordings now?  I suppose the previous downloading of LAV filters did an incomplete job, and somehow MC did not catch the error.
Logged
Yaobing Deng, JRiver Media Center
Pages: [1]   Go Up
« previous next »