Topic: HTTP command for opening URL to specified zone (Read 5250 times)

twb1000 · « **on:** July 14, 2015, 01:27:21 pm »

Try to make some commands for direct opening of internet radio stations to specific zone. Can you provide an example?

Perhaps some variation on this for opening URL in zone 2

MCWS/v1/Control/MCC?Command=20001&Parameter=(url),50331648

Matt · « **Reply #1 on:** July 14, 2015, 01:31:05 pm »

Try this:
MCWS/v1/Playback/PlayByFilename?Filenames=http://www.myradio.com/1.mp3

mjcrhbsh01 · « **Reply #2 on:** July 14, 2015, 02:22:58 pm »

Just note that currently this command will always play to the active zone regardless of the zone in the command. This is something that will be fixed in the next build.

See this thread: http://yabb.jriver.com/interact/index.php?topic=98507.0

Matt · « **Reply #3 on:** July 14, 2015, 02:27:50 pm »

Quote from: mjcrhbsh01 on July 14, 2015, 02:22:58 pm

Just note that currently this command will always play to the active zone regardless of the zone in the command. This is something that will be fixed in the next build.

It's getting the zone just fine in our code.

Code: [Select]

		// get the zone
		CPlayerZone * pZone = GetZone(Context, this);

		// post the message
		if (pZone != NULL)
		{
			pPlay->m_nZone = pZone->GetZoneID();
			PostMCC(MCC_PLAY_ADVANCED, (intn) pPlay);

twb1000 · « **Reply #4 on:** July 14, 2015, 02:35:25 pm »

Just to be sure where would the zone specifier be placed in this command:

MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u

perhaps zone 2 (this command is working on current zone)

Matt · « **Reply #5 on:** July 14, 2015, 02:40:12 pm »

Quote from: twb1000 on July 14, 2015, 02:35:25 pm

Just to be sure where would the zone specifier be placed in this command:

MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u

Like this:
MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u&ZoneType=Name&Zone=Stereo

mjcrhbsh01 · « **Reply #6 on:** July 14, 2015, 02:53:34 pm »

Quote from: Matt on July 14, 2015, 02:27:50 pm

It's getting the zone just fine in our code.

Code: [Select]
// get the zone CPlayerZone * pZone = GetZone(Context, this); // post the message if (pZone != NULL) { pPlay->m_nZone = pZone->GetZoneID(); PostMCC(MCC_PLAY_ADVANCED, (intn) pPlay);

I don't understand code so I don't know what it shows. But it has not been working for me, and it was actually you that I was quoting from the other thread that you found the bug & it will be fixed in the next build, so I am confused.

http://yabb.jriver.com/interact/index.php?topic=98507.msg681431#msg681431

twb1000 · « **Reply #7 on:** July 14, 2015, 03:15:45 pm »

Quote from: Matt on July 14, 2015, 02:40:12 pm

Like this:
MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u&ZoneType=Name&Zone=Stereo

I have tried some variations on this (getting no luck). Not sure if you use zone name or zone # as the identification and where it sits in the command line.

Zone 2 would be "JRiver 2"

Hendrik · « **Reply #8 on:** July 14, 2015, 03:22:06 pm »

Quote from: twb1000 on July 14, 2015, 03:15:45 pm

I have tried some variations on this (getting no luck). Not sure if you use zone name or zone # as the identification and where it sits in the command line.

Zone 2 would be "JRiver 2"

You'll need a new build of MC for this to work, at least 127 IIRC:

mjcrhbsh01 · « **Reply #9 on:** July 14, 2015, 09:05:31 pm »

Quote from: Hendrik on July 14, 2015, 03:22:06 pm

You'll need a new build of MC for this to work, at least 127 IIRC:

What does "127 IIRC " mean?

JimH · « **Reply #10 on:** July 14, 2015, 10:02:10 pm »

Build 127. Coming in a few days.

mjcrhbsh01 · « **Reply #11 on:** July 14, 2015, 10:11:48 pm »

Quote from: JimH on July 14, 2015, 10:02:10 pm

Build 127. Coming in a few days.

Great! Thanks.

twb1000 · « **Reply #12 on:** July 15, 2015, 03:18:11 pm »

Awesome!

twb1000 · « **Reply #13 on:** July 15, 2015, 04:36:33 pm »

It occurred to me that perhaps I might simply need to be smarter than the problem:
issue 2 separate commands; one to select the zone and a second command to play the stream on the selected zone.

mjcrhbsh01 · « **Reply #14 on:** July 15, 2015, 05:55:08 pm »

Quote from: twb1000 on July 15, 2015, 04:36:33 pm

It occurred to me that perhaps I might simply need to be smarter than the problem:
issue 2 separate commands; one to select the zone and a second command to play the stream on the selected zone.

That's what I am currently doing as a temporary workaround. I use the Tasker app on Android to issue the "Zones" command to retrieve the currently active zone & save it to a variable, I then send the "SetZone" command to make the zone where I want to play the file the active zone, I then send the "PlaybyFilename" command, then I send the "Zones" command again to set the active zone back to what it was before.

twb1000 · « **Reply #15 on:** July 15, 2015, 10:19:29 pm »

Yeah, I think I am going to wait for the next version.

twb1000 · « **Reply #16 on:** July 27, 2015, 08:10:52 pm »

Quote from: Matt on July 14, 2015, 02:40:12 pm

Like this:
MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u&ZoneType=Name&Zone=Stereo

I am back to this again . . . .
So how would my command look if I wanted to play this URL to lets say zone "JRiver 2"

Zone information follows:

<?xml version="1.0" encoding="UTF-8" standalone="true"?>
-<Response Status="OK">
<Item Name="NumberZones">7</Item>
<Item Name="CurrentZoneID">0</Item>
<Item Name="CurrentZoneIndex">0</Item>
<Item Name="ZoneName0">Media Server PC</Item>
<Item Name="ZoneID0">0</Item>
<Item Name="ZoneGUID0">{36EAFE41-FCC1-4BE0-820B-2CD1AA7C3DAA}</Item>
<Item Name="ZoneDLNA0">0</Item>
<Item Name="ZoneName1">JRiver 1</Item>
<Item Name="ZoneID1">10000</Item>
<Item Name="ZoneGUID1">{529CB8FF-0E94-43D0-93D7-F3177A9BF701}</Item>
<Item Name="ZoneDLNA1">0</Item>
<Item Name="ZoneName2">JRiver 2</Item>
<Item Name="ZoneID2">10001</Item>
<Item Name="ZoneGUID2">{E1E2F4ED-3299-4B52-B3E0-1959D4C872A2}</Item>
<Item Name="ZoneDLNA2">0</Item>
<Item Name="ZoneName3">JRiver 3</Item>
<Item Name="ZoneID3">10002</Item>
<Item Name="ZoneGUID3">{229E36E0-9FB3-43A3-8530-80F68B07B5F7}</Item>
<Item Name="ZoneDLNA3">0</Item>
<Item Name="ZoneName4">JRiver 4</Item>
<Item Name="ZoneID4">10004</Item>
<Item Name="ZoneGUID4">{DB0DE9B5-3ED9-4203-9EF1-FD8885A389D5}</Item>
<Item Name="ZoneDLNA4">0</Item>
<Item Name="ZoneName5">Loft</Item>
<Item Name="ZoneID5">10006</Item>
<Item Name="ZoneGUID5">{648c86c0-1e9b-11b2-91e1-9270a678fadf}</Item>
<Item Name="ZoneDLNA5">1</Item>
<Item Name="ZoneName6">Yamaha DLNA</Item>
<Item Name="ZoneID6">10005</Item>
<Item Name="ZoneGUID6">{5f9ec1b3-ed59-1900-4530-00a0deb538cb}</Item>
<Item Name="ZoneDLNA6">1</Item>
</Response>

Hendrik · « **Reply #17 on:** July 28, 2015, 04:40:53 am »

Just add the zone parameters like in the example.

Either by ID:
MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u&ZoneType=ID&Zone=10001

Or by Name (escaping the space):
MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u&ZoneType=Name&Zone=JRiver%202

twb1000 · « **Reply #18 on:** July 28, 2015, 09:57:56 am »

For some reason this command does not seem be working for me. I can execute other commands such volume control and volume presets. I do have the latest build .131. Other commands I can execute either though iRule or directly via browser.

http://192.168.1.9:52199/MCWS/v1/Playback/PlayByFilename?Filenames=http://www.antenne.de/webradio/channels/chillout.m3u&ZoneType=ID&Zone=10001

comes back with response in browser of:
<?xml version="1.0" encoding="UTF-8" standalone="true"?>
<Response Status="OK"/>

twb1000 · « **Reply #19 on:** July 29, 2015, 12:15:20 pm »

OK, this seems to be working. Thank you!

INTERACT FORUM

Author Topic: HTTP command for opening URL to specified zone (Read 5250 times)