TCP/IP Products > TCP-PLUS

Default keymapping for non-pc style terminals

(1/3) > >>

admin:
ANSI  SCO UNIX/XENIX
ALT is used in place of the SCO UNIX/XENIX Console's CTRL+SHIFT.

AT386
No special mapping

AT&T605
Keypad function keys = * / and + (PF1, PF2, PF3, and PF4) are mapped to CTRL+F5, CTRL+F6, CTRL+F7, and CTRL+F8. They are also mapped to SHIFT / * - and + on the extended keyboard.
F13 and F14 are mapped to CTRL+F1 and CTRL+F2
SHIFT+F13 and SHIFT+F14 are mapped to CTRL+F3 and CTRL+F4
KEYPAD MODE keys 1 - 9 and 0 are mapped to ALT+F1 - ALT+F10
KEYPAD MODE - is mapped to ALT+9
KEYPAD MODE , is mapped to ALT+0
KEYPAD MODE . is mapped to ALT+-
KEYPAD MODE ENTER is mapped to ALT+=

IBM 3151
SEND is mapped to ALT+9
RESET is mapped to ALT+0
JUMP is mapped to the / key on the keypad (SHIFT it for /)
PA1 is CTRL+1 (1 on the keypad)
PA2 is CTRL+2 (2 on the keypad)
PA3 is CTRL+3 (3 on the keypad)

VT102
PF1 - PF4 are mapped to F1 - F4
KEYPAD MODE KEYS 1 - 9 and 0 are mapped to ALT+1 - ALT+0
KEYPAD MODE - is mapped to ALT+F1 and also ALT+-
KEYPAD MODE , is mapped to ALT+F2
KEYPAD MODE . is mapped to ALT+F3
KEYPAD MODE ENTER is mapped to ALT+F4
VT102 cursor keys application mode is fully implemented.  However, while not in application mode, the application mode cursor keys are still available as F5 - F8.

VT220
PF1 - PF4 are mapped to F1 - F4
KEYPAD MODE KEYS 1 - 9 and 0 are mapped to ALT+1 - ALT+0
KEYPAD MODE - is mapped to ALT+F1 and also ALT+-
KEYPAD MODE , is mapped to ALT+F2
KEYPAD MODE . is mapped to ALT+F3
KEYPAD MODE ENTER is mapped to ALT+F4
SELECT is mapped to HOME
FIND is mapped to END
INSERT HERE is mapped to INSERT
REMOVE is mapped to DELETE
PREV SCREEN is mapped to PAGE UP
NEXT SCREEN is mapped to PAGE DOWN
The DELETE code is available by using SHIFT+BACKSPACE
F6 - F10 are mapped to F6 - F10
F11 (ESC) is mapped to SHIFT+F1
F12 (BS) is mapped to SHIFT+F2
F13 (LF) is mapped to SHIFT+F3
F14 is mapped to SHIFT+F4
F15 (HELP) is mapped to SHIFT+F5
F16 (DO) is mapped to SHIFT+F6
F17 - F20 are mapped to SHIFT+F7 - SHIFT+F10
When in VT220 8-bit emulation, the 8-bit escape codes are sent for all keys.

WYSE60 and WYSE160
No other special mapping.

FBS_14FrontST:
Admin,

If you could answer a quick one.

I am running ICE.TCP plus for windows.  Build 27.  Purchased 6/27/07 multi user.

I cannot map the keys to Print (I know on older versions it was /ap)

I cannot map the keys to clear fields (older command was /c/e)

Each time I map the keys to the older commands and press the command (using the function keys) any menu item disappears and I am left with the datafields. 

Bob:
2 questions.

1) What key on the keyboard are you trying to map?

2) What was the exact sequence you put in for the keymapping in the old version? (I assume this was Ice.TCP 4.3.1)??

FBS_14FrontST:
I am trying to map the function keys F5 and F10

Yes, that is the version.

FBS_14FrontST:
the exact sequence for the mapped keys were:

F5  /c/e (cleared data fields, used as a quick delete key but the cursor would be at the beginning of the field)

and:

F10 /ap (printed screens)

Navigation

[0] Message Index

[#] Next page