Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stanr]

I'm using Telnet Pro v 5.1.07. The profile is set to use Wyse60 (25 Line) emulation.
 
I am having problems with graphic characters. When displaying the characters to display a box (i.e. 4 corners, the horizontal line and vertical line characters) the box displays properly when displayed on a dumb Wyse55 terminal connected directly to our Unix system but displays with strange characters when on a Telnet Pro session.
 
For example, the character sequence used to display a graphical horizontal line character is "ESC H :"
This displays correctly on a dumb Wyse55  terminal but displays as a capital "A" with two dots over it on Telnet Pro.
 
What should I do to configure Telnet Pro to display characters the same way that they display on a dumb Wyse terminal?
 
Thanks in advance.
Stan

[Bob]

Use wyse60 24 lines, that is the terminal default and as most unix machines don't know what a wyse60-25 is, you will probably not get what you want by setting to 25 lines to start with.

If an application needs 25 lines IT will change the emulator with an esc sequence.

Also, I've never heard of a wyse 55. I DO know that a wyse 50 is not completely compatable with a wyse60.