ICE

Please login or register.

Login with username, password and session length
Advanced search  

News:

ICETCP.PRO and ICETCP.PLUS are compatible with Windows 11!

Author Topic: FTP - WIN  (Read 3036 times)

scottcamp

  • Jr. Member
  • **
  • Posts: 8
  • Always Lost
FTP - WIN
« on: October 25, 2004, 10:02:05 am »
when I connect to our data center using ftp -win on pc1, I connect, but no folders show. I can use ftp win on pc2 and it does fine. I can also connect to the data center on pc1 via ftp pro fine. I reinstalled the software, with same results. It seems to be limited to this one computer, and only ftp - win.  Any ideas?
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
FTP - WIN
« Reply #1 on: October 25, 2004, 10:50:38 am »
Passive vs Active FTP mode issue.

For an individual site, select the site and click on advanced
The top option is PASV. You probably need to turn that on if it's not already. If it IS on in rare cases you may need to turn it off.

To set this globally for all new sites, do:
View->Options
There is a checkbox called Use PASV for All Sites
Set this as in the individual site example above.
Logged

scottcamp

  • Jr. Member
  • **
  • Posts: 8
  • Always Lost
Re:FTP - WIN
« Reply #2 on: October 25, 2004, 11:22:36 am »
I need to know about ftp-win, not ftp pro. ftp pro works fine
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
FTP - WIN
« Reply #3 on: October 25, 2004, 01:37:22 pm »
Hmmm, Ftp-Win only does active mode. Since some of your machines work and others don't (and I assume they are all on the same lan), you either have a firewall that is allowing some machines to make an active connection and others that do not, or else you have XP SP2 and it's blocking ftp-win.

You could test the command line ftp (start->run  ftp somehostname )
It also can only do active transfers (you'll get a connect but you won't be able to do a directory or get a file).
Logged

scottcamp

  • Jr. Member
  • **
  • Posts: 8
  • Always Lost
Re:FTP - WIN
« Reply #4 on: October 25, 2004, 01:53:47 pm »
They are all on the same lan, and it's only 1 pc out of 20 that cannot do ftp-win. I double checked the cheezy sp2 firewall, it's off, and the traffic to our data center passes through a frame relay, not over the internet so it doesn't hit our firewall except for the route put in to turn it around to the F.R.
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
FTP - WIN
« Reply #5 on: October 25, 2004, 02:58:42 pm »
Ugh.
Are the PC's all using the same login and password??
Same host? (perhaps the name is the same but the IP address is different)
Same version of Windows?
Did windows ftp work??
Logged

scottcamp

  • Jr. Member
  • **
  • Posts: 8
  • Always Lost
Re:FTP - WIN
« Reply #6 on: October 25, 2004, 03:17:40 pm »
Nobody uses the same user/pass. But I can use My user/pass on my pc, and it works, then go to the other one, use My user/pass and it doesn't work. We all go to the same IP, and using XP sp2. I've tried a couple FTP programs. It's only happening with FTP-WIN on this one pc. Yep...I'm always lost...
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
FTP - WIN
« Reply #7 on: October 25, 2004, 04:20:28 pm »
Ok, then how about the stuff in the little debug window. Is it the same on a machine that works and one that doesn't?
Logged

scottcamp

  • Jr. Member
  • **
  • Posts: 8
  • Always Lost
Re:FTP - WIN
« Reply #8 on: October 26, 2004, 07:16:40 am »
Debug window? The options menu? yes, they are the same.
Logged

Bob

  • Administrator
  • Ice Artist
  • *****
  • Posts: 1607
FTP - WIN
« Reply #9 on: October 26, 2004, 08:46:34 am »
Try changing the windows directory then do a refresh on the unix side. Other than that, I'm pretty much out of ideas.
Logged

scottcamp

  • Jr. Member
  • **
  • Posts: 8
  • Always Lost
Re:FTP - WIN
« Reply #10 on: October 26, 2004, 02:25:23 pm »
Didn't work. Thanks anyway.
Logged
 

Page created in 0.014 seconds with 20 queries.