INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Color Control for Fibaro LED Strip  (Read 2092 times)

drmimosa

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 690
Color Control for Fibaro LED Strip
« on: July 11, 2016, 03:56:07 pm »

I've got a Fibaro Z-wave LED contoller wired to an LED strip and joined to my Engen Z-wave network. It was tricky to add to the network, but worked great once set up.

ColorSet works, for example
"C:\Program Files (x86)\J River\Engen 1\Server\EngenClient.exe" -n color_set(3,red=255,green=255,blue=0) sets yellow, ...color_set(3,red=0,green=0,blue=255) sets blue.

The device doesn't get recoginized by the web color interface however. It shows four sliders instead. When you move them there is an error.

You can see it listed as device three in the screenshot below, plus the error message when you try to change one of the brightness sliders. Below are logs and the device info.

Code: [Select]
Log file after error:

2016-07-11 15:53:42: zdriver.0:============================================================================ 422.37
2016-07-11 15:53:42: zdriver.0:Dequeued zw_send_data: reply=True  response=True  submit_time=1468270422.37
2016-07-11 15:53:42: zdriver:Delivering zw_send_data: ack_time=1468270422.37  delivered=True  reply=True  reply_time=1468270422.39  response=True  response_time=1468270422.38  submit_time=1468270422.37  transmit_time=1468270422.37
2016-07-11 15:53:42: zquery:Duplicate Response: {'duration': None, 'color': 'red', 'target': None, 'value': 27}
2016-07-11 15:53:42: zhandler:Receive UNEXPECTED switch_color msg={'target': None, 'color': 'red', 'cmd': [33 04 02 1b], 'value': 27, 'snode': (0, 5, 0), 'duration': None, 'rx_status': {'routed_busy': False, 'cast': 'unicast', 'promisc': False, 'explore': False, 'low_power': False}, 'ccid': 13060}
2016-07-11 15:53:42: zcmd:send_cmd((0, 5, 0), [51, 3, 2]) ==> {'status': 'ok', 'times': {'ack': 1, 'reply': 24, 'response': 6, 'wait': 2}}
2016-07-11 15:53:42: color:color_get((0, 5, 0), red, callback) ==> None


Fibaro device info from Engen:

{
    "cap": 83,
    "generic_type": "switch_multilevel",
    "mfg_id": "fibargroup",
    "mc_individual": 5,
    "sensor1000": false,
    "prod_id_type": 2304,
    "specific_type": "power_switch_multilevel",
    "mc_dynamic": false,
    "1": {
        "specific_type": "power_switch_multilevel",
        "endpoint": 1,
        "address": [
            0,
            3,
            1
        ],
        "dynamic": false,
        "generic_type": "switch_multilevel",
        "gmark": true,
        "cmdclasses": [
            "switch_multilevel"
        ],
        "basic": {
            "value": 99
        }
    },
    "3": {
        "specific_type": "power_switch_multilevel",
        "endpoint": 3,
        "address": [
            0,
            3,
            3
        ],
        "dynamic": false,
        "generic_type": "switch_multilevel",
        "gmark": true,
        "cmdclasses": [
            "switch_multilevel"
        ],
        "basic": {
            "value": 99
        }
    },
    "2": {
        "specific_type": "power_switch_multilevel",
        "endpoint": 2,
        "address": [
            0,
            3,
            2
        ],
        "dynamic": false,
        "generic_type": "switch_multilevel",
        "gmark": true,
        "cmdclasses": [
            "switch_multilevel"
        ],
        "basic": {
            "value": 99
        }
    },
    "5": {
        "specific_type": "power_switch_multilevel",
        "endpoint": 5,
        "address": [
            0,
            3,
            5
        ],
        "dynamic": false,
        "generic_type": "switch_multilevel",
        "gmark": true,
        "cmdclasses": [
            "switch_multilevel"
        ],
        "basic": {
            "value": 0
        }
    },
    "4": {
        "specific_type": "power_switch_multilevel",
        "endpoint": 4,
        "address": [
            0,
            3,
            4
        ],
        "dynamic": false,
        "generic_type": "switch_multilevel",
        "gmark": true,
        "cmdclasses": [
            "switch_multilevel"
        ],
        "basic": {
            "value": 0
        }
    },
    "cmdclasses": [
        "switch_all",
        "manufacturer_specific",
        "version",
        "switch_multilevel",
        "multi_instance",
        "configuration",
        "meter",
        "sensor_multilevel",
        "association"
    ],
    "basic": {
        "value": 99
    },
    "mc_identical": true,
    "prod_id": 8192,
    "listening": true,
    "address": [
        0,
        3,
        0
    ],
    "sensor250": false,
    "basic_type": "routing_slave",
    "wstatus": 2,
    "gmark": true,
    "security": 28
}
Logged

drmimosa

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 690
Re: Color Control for Fibaro LED Strip
« Reply #1 on: July 21, 2016, 09:28:59 am »

This is fixed now on build .18, the four webpage sliders work to change the colors of the light strip.
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72379
  • Where did I put my teeth?
Re: Color Control for Fibaro LED Strip
« Reply #2 on: July 21, 2016, 09:35:16 am »

Good news.  Thanks.
Logged
Pages: [1]   Go Up