INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: 2 Way Switching?  (Read 3549 times)

locust

  • Citizen of the Universe
  • *****
  • Posts: 699
2 Way Switching?
« on: October 13, 2016, 05:26:01 am »

Hi

I'm pretty new to zwave devices I was thinking would it be possible to setup 2 way switching to independently control RGB led strip lighting?

I was thinking of getting these two devices to work in unison but don't want to buy them unless I know for sure I can wire them up correctly. The second device isn't a z-wave device, I just want that so I can mount it on a panel under my computer desk for manual adjustment.

Fibaro FGRGBWM-441 RGBW Controller
https://www.amazon.co.uk/gp/product/B00DZ3VKZS/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE

RGBZONE DC 12V-24V Wall-mounted Touch Panel Full Color RGBW Dimmer Controller for LED Strip Lighting (Black)
https://www.amazon.co.uk/gp/product/B01IQWAHAQ/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=AI4ELE5B7DI6Z
Logged

linutic

  • Recent member
  • *
  • Posts: 32
Re: 2 Way Switching?
« Reply #1 on: October 13, 2016, 12:05:23 pm »

Hi

I'm pretty new to zwave devices I was thinking would it be possible to setup 2 way switching to independently control RGB led strip lighting?

I was thinking of getting these two devices to work in unison but don't want to buy them unless I know for sure I can wire them up correctly. The second device isn't a z-wave device, I just want that so I can mount it on a panel under my computer desk for manual adjustment.

Fibaro FGRGBWM-441 RGBW Controller
https://www.amazon.co.uk/gp/product/B00DZ3VKZS/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE

RGBZONE DC 12V-24V Wall-mounted Touch Panel Full Color RGBW Dimmer Controller for LED Strip Lighting (Black)
https://www.amazon.co.uk/gp/product/B01IQWAHAQ/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=AI4ELE5B7DI6Z

A link to the Fibaro user manual is listed below:

http://www.fibaro.com/manuals/en/FGRGBWM-441-RGBW-Controller/FGRGBWM-441-RGBW-Controller-en.pdf

One of the devices you mention is controlled by Zwave, the other by a proprietary remote.  No matter what our software does, it's not going to be able to directly control the second device.  You could replace the second device with a Z-Wave button controller to talk to Engen, and use Engen to control the Fibaro device.  The AEON Minimote would work well for this:

https://www.amazon.co.uk/Aeotec-Minimote-remote-control-DSA03202W-ZWEU/dp/B00JGT8EO0

If you really want to use the second device, you will probably have to find some way to wire them together.   The Fibaro device manual says it has 4 analog inputs, so there may be some way to have the other device feed it a signal, and coordinate operation that way.  Or you could purchase a third device that merges the output of two independent devices.  Or some other way.  It seems this is an analog wiring and device configuration challenge.  Whether you can make this work or not probably depends on how much time and effort you put into the project.
Logged

drmimosa

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 690
Re: 2 Way Switching?
« Reply #2 on: October 13, 2016, 12:54:07 pm »

I can confirm that color control and on off controllers work with the Fibaro LED controller using Engen.

It took some electronics setup, and I had to hack open a power supply and connect it to the device . Also had to wire in the RGBW leads from the led strip.

Aeon Labs is making a Z wave led strip, website says it will be released this year. All Aeon Labs stuff seems to work well with Engen.

http://aeotec.com/z-wave-led-light-strip
Logged

drmimosa

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 690
Re: 2 Way Switching?
« Reply #3 on: October 13, 2016, 01:04:49 pm »

Also, the Fibaro will dim the lights on a 0-100 scale.
Logged

locust

  • Citizen of the Universe
  • *****
  • Posts: 699
Re: 2 Way Switching?
« Reply #4 on: October 13, 2016, 03:31:44 pm »

Thanks for the response now I know it can be done, I'll start looking into it more. I like the idea of still having a proprietary option, keeping some of the old with the new, it's just for under my desk anyway, I like a challenge so it should be fun trying to figure it out

Thanks again
Logged
Pages: [1]   Go Up