INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Preventing mic input from getting to outputs and causing feedback  (Read 1077 times)

rocksteady40

  • Recent member
  • *
  • Posts: 8
Preventing mic input from getting to outputs and causing feedback
« on: September 03, 2018, 07:29:56 am »

Hi All,

   I'm running MC 21 with a Focusrite 18i20 and I'm having a problem where the inputs to the Focusrite are always being fed to the outputs.  Most of the time this is fine, except when using REW and the microphone is plugged in.  This can cause feedback through the system.

   I use one input for the microphone and two others for a turntable and tuner via a preamp.  Is there a way to only allow the pair of inputs through to the outputs but still allow the mic to be used for REW?

  I typically use input 1 for the mic and inputs 3&4 for the phono/tuner.  I have Open-Live/ASIO IN set to 2 channels with an offset of 2.  I thought that this would prevent the mic input from getting to the outputs but I guess not. 

Thanks
Bob
Logged
Pages: [1]   Go Up